Final Setup Before Hitting The Touring Car Track! - A Video from The Invisible Speed Onroad Course

[@zebarrocas8779]

This video is so well made that you learn alot and the information is easy to understand or you can use it has a RC ASMR kkkkkkkkkkkkkk. Congrats to all of you .

[@fadeleez]

This video really helps me a lot with my setup station… thanks mate!!👍👍👍

[@bobsrc9075]

keep in mind other transmitters such as spectrum you would add positive expo. futaba and few others is negative expo. just thought i'd throw that there so people don't get confused. great video.

[@drawstraw4483]

Do you happen to know about the flysky noble NB4?

[@bobsrc9075]

what problems have you run into@@drawstraw4483

[@Bensonsan]

Great stuff just finished building my first 1/10 touring car kit . Thanks bud

[@godofobelix]

What is the best drive train type for 1/10 electric touring race ? Is it belt or shaft driven?

[@yaboobaker]

very detailed video, helped me a lot thanks

[@rakneraser]

I dont own a xray car but Alex is my favorite wathing setup videos!!! You are the best man!

[@arrows26]

incredible ! Thank you so much

[@invisiblespeedrc]

You should look into getting the course if you think that!

[@PopalongRC]

Thanks for sharing

[@R.B_B]

Great video!

[@Luke-en2tk]

Hi Alex, so what is the reason to check the droop without the shocks, Martin used to do it with the shocks on?

[@WellingtonIronman]

That's a good question. If the droop is being limited by the shocks, then you'll be measuring it wrongly without them connected. I guess that by leaving on the shocks you might not see any small changes in the droop reflected in the measurements if the shock is a bit stiff?

[@hagberg]

The XRAY X4 lower arms are rather soft. If the downstop is measured with the shocks attached, the downstop value will be largely influenced by the spring hardness and preload. If measured without shocks, that's the "real" downstop value and the position of the arm. This way we can get a consistent reference regardless of what spring or preload is used.

[@Luke-en2tk]

@@hagberg thanks Alex that makes perfect sense

[@bluegroovemodelsports9650]

great video

[@moulip]

Hi, about camber setting, don't you need to set it up with the ride height gauge under the chassis to be sure you have the right amount of camber at the ride height you set up just before ?

[@invisiblespeedrc]

Set your rideheight with tyres first before using the setup station

[@BinarySounds]

when you adjust the preload for tweak, won't it throw off the ride height adjustments you made earlier?

[@MetalMathiasTP]

Yes it Will, but preload is more important.

[@toxka]

Good evening, a question about the order of the settings, is it different on the t4? or can i do the same order? it is also advisable to remove the suspensions for the drop on the t4? thank you

[@jas-FPV]

Depending on radio negative expo gives you the opposite result

[@nickytheyahoo_]

looks annoying , passssssssss

[@Bogues_88]

Just got a 4wd tour car .. haven't had one before. Is it normal for touring cars to have no front diff ???

[@invisiblespeedrc]

Yes