Final Shift Out RPM Explained

How to determine "Final Shift Out RPM"

[@michaelmilkovich4120]

So you basically put it in low and put it to the floor?

[@ShippRacing]

What is your final shift out on rzr turbo s?

[@MrSupremetoolinc]

8300-8500 RPM depending on tune

[@redneckway1602]

I just put a muddee clutch kit in my textron stampede 900 and everything seems good and responsive but seems to be turning alot of rpm for the speed if you could try and help me I would seriously appreciate it

[@MrSupremetoolinc]

Softer finish rate springs in primary or secondary ill lower mid range cruising RPM put will loose overall performance Adding weight to the cam arms in the primary will also lower RPM

[@redneckway1602]

@@MrSupremetoolinc okay cause it just seems like no matter what it wants to run at least 4k all the time even at like 10 15mph and 5500 at 30ish it will reach its top speed at 60 like 7900, and I believe it revs to 8000. Shortly after testing, it started to run hot cause it seemed to be working way to hard. Also low gear feels pointless and if you step on it it will go for a second but then seems to over rev and feels like somethings slipping or doesn't wanna go anywhere.

[@redneckway1602]

@@MrSupremetoolinc im trying to find the spring rates and helix angle compared to stock

[@MrSupremetoolinc]

@@redneckway1602 you cant compare our rates and angles to stock as they operate differently. This video may help find the answers you are looking for... kzbin.info/www/bejne/bnaZh6ODma58jNU

[@ShippRacing]

Was that on a non turbo rzr?

[@MrSupremetoolinc]

8200