Finally Cvr 3002 professional power amplifier Review and first Testing

[@cvrproaudio]

thank you for review! nice video,thanks for share.

[@Djshaw1kinglegend]

You are welcome. Thanks for making a great amplifier and other products. I appreciate that you follow and support soundsystem culture as well keep up the good service. Thanks, DjShaw1Kinglegend

[@tyronepowell6599]

@@Djshaw1kinglegend i heard you say some guys open up their amps volume fully and they will run into clipping problems and other stuff..if you open up the amps the you cut back on the input..opening up the amps gives you the full wattage..just like if the amp is to much watts for the speaker you turn down the volume..

[@Djshaw1kinglegend]

@@tyronepowell6599 knobs on amplifiers are actually for setting gain there not intended for more volume setting thats what the mixer is for and it has gain knobs as well. Most mid class amplifiers such as qsc & inuke, etc there more than likely to clip when gain knobs are fully open. Amplifiers such as crown macro tech and powersoft they can handle being fully open more without clipping out and shutting down. Running most amplifiers fully open will 9 times out of ten cause issues proper gain structure needs to be set to avoid thermal shutdown, clipping and speaker damage due to excessive distortion. Thanks for watching.

[@kemarsmalling4844]

How much watts is this amplifier?

[@ryanramjattan3169]

Those amps has serious power.i currently have the cvrd2002 playing a pair Of 18 sound 18lw2500. That amp pushes those speakers like nothing.works great for a bass amp.

[@Djshaw1kinglegend]

Yes indeed there powerful. Thanks for watching i really appreciate it 👍🏾

[@nishanrooplall7624]

Did u bridge the CVR D 2002 or u have the pair of 18lw2500 playing at 4 ohm on one channel?

[@angeleyes5176]

Any advise on this amp in the video? When using the amplifier for a while and it gets warm .....the amplifier start to electric shock. Is there anyway to fix this issue?

[@DaneTS24]

Great video, what sensitivity was the amp set at during this test? That can explain the signal light, check the dip switches at the back.

[@Djshaw1kinglegend]

All switches are to the left. I set ithe gain its good now. Thanks

[@emmanuelyambayamba8513]

nice video .what is the weight of the amplifier?

[@Djshaw1kinglegend]

It's 27 pounds . 👍🏾✅️🔊

[@latinobazaar]

There's some useful information but the really useful information such as: true outpower, current draw at 1/8 power, current draw at clipping, slew rate, amperage requirements, and alike will let the viewer know the real story with this amp.

[@Djshaw1kinglegend]

Will do next time. Thanks for your support.

[@jaim169]

What song is that playing at 26:45 mark? Sounds really good!

[@aryakodestudios]

Do you think it could be because you are playing from the 15 amp/120 and not the 30 amp/220 why signal lights or showing at half way? I plan to use 30 amp/220 with this amp and see how it handles @ 2 ohm. Anyway it plays the tops real clean just an orchestra!! We have the iNukse12000s playing tops and looking to use these CVR for Bass. Can’t wait to finish this project. Thanks again fam. Your sound is playing real good trust me.

[@Djshaw1kinglegend]

Hey I appreciate the compliment thanks 👍🏾, yeah i thought about the power situation as u mentioned yes 30amp at 220v would be a much better response i think as well. Keep me posted on that. Thanks for watching!

[@audibqbalkanbalkan]

Greetings, how good is the CVR quality amplifier?

[@Djshaw1kinglegend]

There very good 👍🏼 ✅️🔊

[@audibqbalkanbalkan]

how much experience do you already have with that amplifier, where did you buy it, where does it come from

[@donThelemic]

@30:10 Good video.......but I have ran high output amplifiers on scoops and void double 18" for 8years, with knobs turned fully up. I have no problems or issues from this and never had clipping. Setting limiters and knowing how to, is very vital and why people like me use the full potential of our equipment with no clip[ping.

[@Djshaw1kinglegend]

I understand totally. I can fully open the crown macro tech 3600vz as well so i know what you mean. When using this cvr and similar budget friendly or entry pro level amplifiers such as there clipping activates way earlier so you have to set the gains accordingly, hopefully that helps. Thanks for watching 🔊✅️👍🏽

[@mrpopthatazz5056]

What's the nose dp please ??

[@mrpopthatazz5056]

Can you please explained the diffrence between cvr and admark please sir

[@mrpopthatazz5056]

Tks

[@danielwander605]

I just picked up one of these except it’s the new version. Once powered up it makes a constant rhythmic buzzing noise. It’s not crazy loud and not a problem but I’m not sure if it’s normal or not. I’m curious if it was the same thing with your amp?

[@Djshaw1kinglegend]

Hey, good buy👍🏾. Yes mine does alittle buzz when first powered up for a second but not while idling. All those capacitors its like a old tv ppwering up especially if you don't use it for afew weeks. Otherwise its good. Just make sure your outlet is grounded and getting enough voltage/amperage. Thanks for watching.

[@danielwander605]

@@Djshaw1kinglegend it’s not the power buzz when the capacitors are charging. It’s after that and it doesn’t stop. Bzz…bzz…bzz. It’s a pretty much a buzz per second. But if you don’t have it then it’s probably a defect.

[@Djshaw1kinglegend]

@@danielwander605 yeah sounds like you have a defective product.

[@horaciofromearth4794]

Similar sound on my 3004, hasn’t been a issue just concerning.

[@danielwander605]

@@horaciofromearth4794 the manufacturer told me it was normal. Same exact sound on my 2nd one so I figured it was fine. Can only hear it if I put my ear right up to it.

[@makstaz79]

I wouldn't toss those crown macro techs around either the metal housing that encases them is very soft.From one sound guy to the next big up yourself.

[@dalemyrie597]

Thanks for this review love these amps hear them play clean and the bass line is great . How do you compare it to the Qscmx3000 T hats what I use to play bass on my system now . My friend tell me to get the 2002 or 3002 model. My bass line will improve more , is that so . What's the idea with the different colours .

[@Djshaw1kinglegend]

Hey thanks for watching i appreciate it, glad to hear your interested in the cvr there really good amplifiers lots of power you won't be disappointed switching just make sure your speakers are up for the challenge compared to the qsc which is also a great amplifier really reliable and holds value so don't get rid of it if you do get the cvr. The Cvr3002 is the older model the new model is Cvr3302 alittle more power but same price range. Oh the blue models where the first models there all black now unless you request a different color. Thanks again 👍🏾✅

[@dalemyrie597]

@@Djshaw1kinglegend Thanks for the information. In regards to the Speaker issue I believe I need to improve on them . Presently I have 4 ,18 inches speaker 2 gauss double spider speaker , I celestion and a L18-851 1000watt rcf my bass speakers all 4 inches coil .For low mid 4, 15 inches blastking .. .I use my Pv cs800 that big bulky amps 4u for the bass .believe me it's from the 80s uses 32 transistor and it's a beast .the MX 3000 I use for low mid and hi mid . Can't use the 3000 on those speakers. So I have to get some 2500watt 18sound speakers of which I am sourcing. The Crv will do me good so reducing rack space. I only need two for now .

[@dalemyrie597]

@@Djshaw1kinglegend I also have this link. With. Mila. Lei. From CVR Audio pro in China and was sent the prices from each amps .great prices 788 us for the 3002

[@Djshaw1kinglegend]

@@dalemyrie597 👍🏾 nice.

[@garzadelagarza]

Do you conect it to a power conditioner or straight to a wall outlet ?

[@Djshaw1kinglegend]

Wall is best but if you use a power conditioner 15 amps minimum or it will trip breaker. Also if you have alot of other equipment along with amplifier plugged in conditioner it will trip breaker as well it requires solid current to play efficiently. Thanks for watching 👍🏾 ✅️ 🔊

[@garzadelagarza]

@@Djshaw1kinglegend thanks for answering my question. Regards

[@hardlashslentertainment5896]

I’m trying buy one of these the guy is telling me buy the admark k20 is even better what’s thought on this

[@Djshaw1kinglegend]

They are all pretty much the same build quality it really boils down to if u want to say your amplifier is 20,000 watts or 15,000 watts lol. Cvr company claims to have a more stable power supply so I'll just say that. Thanks for watching

[@boydw1]

It's a damn good thing it doesn't have 1/4" inputs. If you accidentally plugged or unplugged a 1/4" connection while this amp is on, the thump would very likely kill your speakers. Surprised you tested it on mids rather than subs.

[@Djshaw1kinglegend]

Thanks for watching. For video purposes mids was the best to hear on video especially if not using good headphones and the easiest for me to access at the moment without it being in the rack. 👍🏾

[@shadrachjackson8928]

Good evening Mr DJ Shaw. This amp seems very nice and I like it. Tell me what you think about "The Loud Factory" or (TLF) brand amplifiers? They have the fp10000q etc.

[@Djshaw1kinglegend]

Hello, the brand's such as the fp 10000q I'm guessing your referring to the lab clones they are decent play very well. There is a few different companies in China selling just make sure you choose a reputable one. Thanks for watching.

[@shadrachjackson8928]

You bet.

[@MrFranklynMiller]

Have you driven subs with them yet?

[@cartycartyamplifiersalesrepair]

Great video really appreciate it keep up the good work 👍 👍 🙏

[@FGEMixVlogs9406]

How much this power amplifier?

[@tejtrambharatt5182]

Hello does the amp makes a ticking noise inside when you turn it on ?

[@Djshaw1kinglegend]

Should be no ticking sound. When first powered on it will sometimes sound like when u first start a microwave thats from the capacitors charging up. 🔊

[@tejtrambharatt5182]

@@Djshaw1kinglegend Thank you for responding, I have one that’s making a pulse noise like a heart beat I don’t know why.

[@djpee4979]

That thinking noise is normal with the cvr amps. It's just the way the cvr power circuitry operates. Please don't miss inform people to thinking they have a bad unit. That is exactly how a cvr is supposed to operate. Cheers.

[@blingvibes717]

Can I play the amps at 2 0hms the lowest ohms

[@SamDGreat-fb7ue]

Where did you bought it sir? Can you give us the link?

[@Djshaw1kinglegend]

[e-mail]

[@hezekiahcharles6754]

Is it risky to run the class D amplifiers at 2ohms per channel..

[@Djshaw1kinglegend]

Yes these cvr are great at 2ohms very stable amplifiers, just make sure your speakers can handle it otherwise they could burn up. Thanks for watching

[@MrFranklynMiller]

I tried this not a good idea, the amps will cut out and suddenly turn back in without warning. If you have the gain turned up you will fry all your speakers. And I mean all!

[@skinnyshon]

It's turning yellow like that early so you don't blow your speakers 😒 it's pushing so much power at a low level

[@herlizabalajadia4956]

hm amplier?

[@SamDGreat-fb7ue]

was that huge watts are rated in rms? or peak power?

[@Djshaw1kinglegend]

Price around $1100 includes shipping. Wattts rated continuous power. Thanks for watching

[@SamDGreat-fb7ue]

how much?

[@onieldavis6906]

Blessup it's a unique power amp i'm curious to see the inside making

[@Djshaw1kinglegend]

Check out the video on my channel cvr and Powersoft. Thanks for watching and please subscribe and share the knowledge

[@HeikoAZ]

Have had a chance to put it thru some serious paces

[@mobettaspice]

Yes the crown amps will take a beating. Yeah you could throw it down the steps But the question is ........ Will the stairs be ok??? 😂 Cause amp is a tank 😂

[@Djshaw1kinglegend]

Lol, u right about that. Thanks for watching

[@totorigzonetv5464]

Nice review..but I dont think it will suit to the of more Filipino sound system enthusiast, we like of more hard kick bass paired in our inclosed boxes like the MCV..

[@tukmoltv9656]

Can I have that sir? I will be very happy if you give me that. I'm from the Philippines but I can't afford to buy that

[@johnstarks5323]

I'm sure the CVR's are great, however, I dislike the gains/pots. Before I Discovered your channel, I bought a Tulun Play M50D from the bay. It's not as powerful but suits me fine as home gear. Plus I like the gains/lights. exact copy of power soft M50q. Maybe when they revise this amp i may buy one. I was looking at the CVR D-1004

[@Djshaw1kinglegend]

Yeah they take alittle getting use to i mentioned at the end of video also lol, but once you hear it and experience the power you won't mind the pots. Theses are reliable I'm not too sure about the Tulun has i haven't heard much about them. Thanks for watching

[@seandepass8451]

This is not a amp for babys.so if u wear pampers leave it alone,talking about light.

[@johnstarks5323]

​@@seandepass8451 Another Keyboard Warrior / fanboy taking criticisms about a product brand personally, like you own this company and I wasn't even talkin to you. so why you all in the mix 1 year later I get it, ain't got nothing better to do with your spare time, but to troll comments on the net. Fun Fact, this company will never defend you like your defending them.

[@glenprovidence4769]

But why would anybody want to toss any amplifier anywhere? Amplifiers, particularly power amplifiers like firearms are precision instruments. No matter how tough or how rugged they are, you ought not to be tossing them around.

[@leo133636]

turn the poti half way and it lets you feeeel...

[@michaeledwards3578]

Has no professional look" dont like