Finally! DIY exhaust tips (BOLT ON! No welding) for Dodge Challenger! So worth it!

Visit my Facebook page here: profile.php?...
Send me a PM where you would like a Mopar Life sticker sent and I will mail one too you. 😎
Buy your exhaust tips from Raccoon Performance. Here is the link:
raccoonperformance.com.co

[@moparlifescatpack]

***LINK TO EXHAUST TIPS*** raccoonperformance.com.co/ Since I posted this video the makers of these now have a website for ordering! Get you some!!

[@christopherhjorth6091]

Those look great! I have the Trackhawk exhaust tips myself and like you said I think these sound better than factory like the Trackhawk ones

[@frostbitedos]

Looks 100% better now!!! I did install the Flowmaster Outlaw exhaust system and it comes with the quad tips.

[@moparlifescatpack]

Nice! I do enjoy Flowmaster but after having mid muffler delete on my last Scat I was happy so just went the same way with this one. Glad I was finally able to make the tips look better though!

[@brooks74silverbee]

I got a satin black set for my WBSP. Had to contact him on form on website but i ended up saving them on the Shop App so i would get notification when they were in stock. Very nice!

[@moparlifescatpack]

Awesome! You are going to love them!

[@dougcoleburn1579]

Just ordered! So glad back in stock!

[@moparlifescatpack]

@moparlifescatpack 0 seconds ago Awesome! Let me know what you think when you get them on. Check out this video for how the polished ones look. kzbin.info/www/bejne/iqeWf5htebV-bacsi=Vxp9FruFvQSg1DUS

[@DrEricSmithakaDjHawkk345683]

Thanks for the video and 2:25 saving me money. I ordered mine's and DIM. I love the sound.

[@moparlifescatpack]

For sure! You’re going to love them!

[@moparlifescatpack]

Also check out my video on the polished version where I go into a little more detail on some tips for removing the factory tips. kzbin.info/www/bejne/iqeWf5htebV-bacsi=TBekBkLmBAsI2im7

[@Destroyer1320]

Looks and sounds great!

[@moparlifescatpack]

Thanks!

[@liljoesanchez1958]

Looks awesome I done the same to my challenger shaker it's a different sound😊

[@moparlifescatpack]

It definitely is! Sounds great!

[@Retro3433]

Love it bro! I don't think it is a placebo effect. I have a 2023 Challenger T/A 392 and I put Flowmaster Super 10s, deleted the resonators, and have 4" quad tips. It sounds absolutely amazing! I really enjoy your channel. Thanks for the content!

[@ZayNeedsSpeed]

the quad tips aint doing nothing but sitting pretty

[@Basslightning666]

I agree, they look and sound better than the OEM Tips Bro.

[@moparlifescatpack]

For sure! I wasn’t expecting a big difference but turns out they may a big difference. Lol waaaay better sound!

[@MoparHollics]

Nice man 👍 gurgling sounds good on idle 💪

[@moparlifescatpack]

🎼 to my ears!

[@liljoesanchez1958]

I replaced mine with the 4in quads with stainless 😊sounds awesome

[@moparlifescatpack]

Heck yeah!

[@JonathanMuniz]

You caused them to be sold out! I want a pair. Those look bad ass. 🔥🔥🔥

[@moparlifescatpack]

They definitely are and I’m sure they’ll be back in stock soon! They will be worth the wait I promise!!

[@flynnzero9282]

Just ordered mine!

[@moparlifescatpack]

Awesome! You are going to love them!

[@ChallengeroftheDay]

Looks Great!!!

[@moparlifescatpack]

Thanks! They made a difference in the sound too. I love it!!

[@rkle75901]

Looks amazing 😍❤

[@moparlifescatpack]

Thanks! I am loving these! Very brutish and muscle car looking! Just what it needed!

[@rkle75901]

@@moparlifescatpack agreed fine sir

[@dougcoleburn1579]

Just installed a pair and they look amazing and they do sound better.

[@moparlifescatpack]

I knew I wasn’t crazy! I love the sound! Congrats on the new tips!

[@dougcoleburn1579]

@@moparlifescatpack thanks! Now to add gloss black Demon wheels.

[@moparlifescatpack]

@@dougcoleburn1579 those will be sick!

[@beepinb412]

Do they fit widebody ?

[@SCedTITAN]

Got my set last night, slight hiccup with them. YES they do bolt right on if you have stock resonators still in place. I have c&l reso delete pipes that retain factory tips, HOWEVER, you must cut off and reuse factory clamps. Using these tips by raccoon work great as long as you reweld the exhaust clamp back onto the c&l pipes. Raccoon is now aware of the slight dilemma and will be noting the website regarding this.

[@moparlifescatpack]

Good to know! Hope you’re enjoying them as much as I am!

[@ViTrucker340]

I finally did my mid muffler delete, MFer active exhaust delete and added these tips on my Scat Pack today. Sounds and looks great!!! Also the owner of the muffler shop told me not to waste my money on those aftermarket exhausts. Thanks again!!!

[@moparlifescatpack]

Nice that’s exactly my set up except instead of the MFer I have mine wired open but same concept. No need for anything else…sounds perfectly dialed in just like it is!

[@ViTrucker340]

@@moparlifescatpack yes sir!

[@beepinb412]

Do they fit widebody

[@moparlifescatpack]

Yes I have them on my widebody Scat Pack.

[@miked1551]

I ordered a pair. I’ve been wanting some quad tips and hopefully they are as good as your video.

[@moparlifescatpack]

You won’t be disappointed. Now that I’ve had them on there a week it definitely gave it a deeper tone and coupled with the mid muffler delete it sounds amazing and, of course, looks bad ass. I don’t know why anyone would pay 5x more for a full exhaust. Let me know what you think of it when you put yours on!

[@moparlifescatpack]

After reading your post I had to go to the garage and enjoy a cold start for no reason. Lol yeah…I’m one of those guys. 😂

[@miked1551]

@@moparlifescatpack they arrived already and I just finished my first cold start with them on. They look killer and I think it's a bit louder too like you said!

[@moparlifescatpack]

@@miked1551 bad ass! This week driving it around I can absolutely tell a difference in the sound! It sounds way more dialed in, if that makes sense. Deep roar and hitting that gas is like 😎!

[@user-wr9lf7wq7p]

Like those tips!! Will be checking out the website till purchase. I suggest you consider changing out the chrome Dodge letters on your rear panel to black ones that Dodge puts on the Hemi Package. Did it on mine and it looks great. Also, makes the whole rear of car look great with the black exhaust tips.

[@moparlifescatpack]

I actually have their stainless tips now. Same design just shinier look. However, I have been thinking about getting rid of the Dodge letters and doing something different just haven’t decided what yet. Here’s how the stainless ones turned out…kzbin.info/www/bejne/iqeWf5htebV-bacsi=dmPkI9zGJh5PCiZn

[@jn8784]

Do you have a link to the black dodge letters?

[@dannyb8022]

Just subscribed!! I just got a 2016 challenger hellcat

[@moparlifescatpack]

Awesome! Thanks for the sub and feel free to post a picture of that Hellcat on the “Mopar Life KZbin Channel” page or group so we can check it out! 😎

[@moparlifescatpack]

facebook.com/groups/1436035977215715/?ref=share_group_link

[@dannyb8022]

@@moparlifescatpack just did

[@redbaron2448]

Should of done a before and after sound clip 💯

[@moparlifescatpack]

Yeah that would have made sense but I didn’t think it would change anything so didn’t do a before. 🤦🏻‍♂️

[@Del-yd5qc]

just ordered them ! man i always thought those stock tips were welded tight smh , if i woulda tried harder on my old car my set up woulda looked better with the borla resonators i swapped onto it after muffler delete , i ended up dumping it down since I saw the tips were tack welded , well we live and learn thanks to channels like Mopar Life

[@moparlifescatpack]

Definitely! They look welded but its actually just the band. Loosen the bolt, give them a decent whack w a mallet if it still feels tight then they pop right off. You will LOVE these tips too. Sound is 💯!

[@Del-yd5qc]

@@moparlifescatpack they shipped it within 30 minutes of ordering , ha! crazy fast fulfillment !

[@moparlifescatpack]

@@Del-yd5qc awesome! Let us know what you think after you put them on!

[@specterfpv2103]

These exhaust tips only ship in America. I'm Canadian 😢 back to Google I go... I CAME BACK TO EDIT...They will ship to Canada. Soooo Happy

[@moparlifescatpack]

😔

[@BillyDog707official]

WowLooks good & sounds good for a great price👍🏾😎☯️

[@moparlifescatpack]

I couldn’t agree with you more!

[@gtmustang2010ont]

Thanks for the video you had made my mind up I just ordered a set last night

[@moparlifescatpack]

You’ll love them! Let me know what you think when you get them!

[@gtmustang2010ont]

@@moparlifescatpack I will 100%

[@gtmustang2010ont]

The tips are installed they look absolutely incredible and it only took like 10 minutes. I appreciate your content keep it coming

[@moparlifescatpack]

@@gtmustang2010ont Awesome! Definitely one of my favorite mods!

[@alexander_3923]

If i was to later cut the resonators would i be able to fit them maybe if i weld them?

[@moparlifescatpack]

You could always weld them if you needed to…they have a metal lip.

[@borri68]

I just looked at my 2023 3.6 SXT and there is a sheetmetal thing covering where the clamp would be. Any idea? Do these come in chrome or polished stainless?

[@moparlifescatpack]

These do come in stainless but Im not sure they fit your vehicle. Im pretty sure your factory exhaust is slightly smaller diameter. kzbin.info/www/bejne/iqeWf5htebV-bacsi=_C--lNE8gNqhufVp

[@TheBrown000]

Do I have to get a diffuser if I want custom tips Chrysler 300 5.7 currently have stock exhaust tips

[@moparlifescatpack]

I’m not sure on that one…I don’t know much about the 300’s.

[@DrEricSmithakaDjHawkk345683]

I have 3 inch pipes which is standard on the 2023 shaker. What is the diameter on the quads at clip on point?

[@moparlifescatpack]

I’m not sure of the measurements at the clip on point but I bet you could reach out to raccoonperformance.com.co and they would be able to answer that for you. As far as I know the tips for the RT and higher trims are all the same but they would know more definitively than I would.

[@dougcoleburn1579]

Hope they get back in stock! Sold out for now. Thanks or the exhaust tip.

[@moparlifescatpack]

@@dougcoleburn1579 for sure! I hope so too!

[@SrtChargerOldMan]

I got a Dodge Challenger, and it came with quad tips from the factory way better than those

[@moparlifescatpack]

That is awesome. Sounds like you got lucky then. Post some pictures of it on our Facebook group so we can check them out. I would love to see what they look like. facebook.com/share/9vCupAaqKJaWsSnP/?mibextid=lOuIew

[@user-pr5po9iq7t]

....Looks WAY BETTER 👍!!! I've been trying to figure out what tips to get for my '23 Widebody! And yes, definitely don't like the Trackhawk/staggered look either 😵‍💫! How does someone go about getting in touch with him (exhaust tips) and getting a sticker too, if they (me 😖) don't have Facebook (or really any social media, other than KZbin)? 🙄.😒

[@azmusclecar]

There are some of us out here that don't have or use Facebook......so how do we get stickers????

[@moparlifescatpack]

Here is the website the link for the tips: raccoonperformance.com.co. For a sticker just send me an email with where you want me to send it to: [e-mail]

[@user-pr5po9iq7t]

@@moparlifescatpack .... Thanks 👍!!! And if that's your personal email, I wouldn't leave it posted 🥴.... That's just me though!!!

[@moparlifescatpack]

That’s the email for the channel. Good looking out though! 👍🏻

[@user-eo2qt2ri9c]

Noice

[@zydical8521]

Would these fit on a Borla atak catback exhaust?

[@moparlifescatpack]

Not sure. Here is the sellers web page if you want to reach out and ask them they may know that answer…raccoonperformance.com.co

[@liljoesanchez1958]

Do you still have them stickers available 😊

[@moparlifescatpack]

Yes I do. Email where you would like them sent to [e-mail] or DM me on my Facebook page (Mopar Life You Tube Channel)

[@EdwardCanter]

I have a 22 RT, my stock tips do not pull right off, any suggestions? I want to get my Racoons on

[@moparlifescatpack]

I’m not 100% but I assume the RT tips are mounted the same as on my RT Scat. Check my other install video for more info on how to remove them. kzbin.info/www/bejne/iqeWf5htebV-bacsi=7nTHgc5jl5O548CH

[@EdwardCanter]

@@moparlifescatpack ok I see it might take a couple wacks with a rubber mallet I'll let you know, thank you

[@thomasmathews3350]

What size is the resonator outlet pipe?

[@moparlifescatpack]

I’m not sure. I did not think to measure it when I put the tips on so I’m not exactly sure what size it is.

[@bigmacdaddy1234]

That's how it should have came from the factory. Nice job.

[@moparlifescatpack]

Thanks! Check out my other video with the same tips but in polished! kzbin.info/www/bejne/iqeWf5htebV-bacsi=kVokPkY7srsz9wxf

[@OmenOfficial]

I was able to get Track Hawk Tips for mine!

[@moparlifescatpack]

Awesome! Definitely the best choice if you want a staggered look!

[@edwintorres4614]

I want a set of these but the site is sold out and they don't respond to emails.

[@moparlifescatpack]

I actually talked with them a week or so ago and was told they have a supply incoming so hopefully soon! 🤞🏻 They are definitely worth the wait though I promise!

[@djv154]

Would this be the same way for a 2023 challenger TA wide body?

[@moparlifescatpack]

I would say yes but always best to confirm with the sellers first. raccoonperformance.com.co

[@djv154]

@moparlifescatpack Should of typed my comment right. The way to get off the stock tips I meant. I've seen a 2 ways to get them off on KZbin.

[@moparlifescatpack]

@@djv154 yes. Removal is the same as in my video. They may be hard to get off after loosening the bolt but the weld is only of the band. The lip of the exhaust tip may be tightly “stuck” but it just needs a little whack w a mallet or hammer to knock it loose. You may think there is no way this is coming off then you knock it loose and it is free. I’ve had several comments of people saying theirs is welded. I guarantee you (if its the factory set up) that its not welded. Only part of the band clamp is welded to hold it in place but the tips are just in there tight.

[@djv154]

​@@moparlifescatpackThank you

[@moparlifescatpack]

@@djv154 Absolutely!!

[@markalphonso4569]

Any other tips out there available that bolt on? Site says sold out:(

[@moparlifescatpack]

Only other ones I know of are the ones off the Jeep Trackhawk but they are staggered and that looks isnt for everyone. Im definitely not a staggered fan.

[@user-pr5po9iq7t]

... Back in stock 👍!

[@Trxeko]

Do you have to buy 2 or just one ?

[@moparlifescatpack]

Not sure on that. You’d have to reach out to the sellers and ask. Here is their website. raccoonperformance.com.co/

[@perpendirkular]

I just got mine in today but when I tried to pull the stock tip off it almost seems welded I’m having a hell of a time trying to get it off any ideas? Mines a 2020 scat

[@moparlifescatpack]

Yes…it looks welded on one side but its just the clamp that’s welded, not the tips. After you’ve loosened the bolt just take a rubber mallet and give the tips a good whack from towards the back of the car and it will loosen it. Watch my other video kzbin.info/www/bejne/iqeWf5htebV-bacsi=hkbA8AMl1r-kujBh and skip to 2:30 mark and I explain it. Hope this helps.

[@perpendirkular]

@@moparlifescatpack I’m wondering if after 4 years mine are possible just stuck with some rust maybe I’ll hit it with some penetrating oil tomorrow and a mallet

[@moparlifescatpack]

Yes, just whack it with a mallet and it will come loose. It feels so tight like this welded but it’s really just tight in that one spot where that clamp is welded. Give it a couple of good whacks and it literally falls right off.

[@perpendirkular]

@@moparlifescatpack definitely will try a mallet and some penetrating lube to see if it will get free if not I’ll just see if the muffler shop can do it when I go get a mid delete

[@moparlifescatpack]

Read through a bunch of these comments, and you will see a lot of people have had that problem and some of them have even sworn that there’s is the only one that is welded on. And then a good whack later and it falls right off and they say oh yeah, you were right. Lol I thought the exact same thing until I knocked it with a mallet and it came off so loosely. I felt silly afterward, so you definitely aren’t the only one.

[@DrEricSmithakaDjHawkk345683]

It's now $250.00 for a pair. Still a good deal.

[@moparlifescatpack]

And they now offer polished! I’m going to be putting a set of polished ones on this week. I’ll put a video out to show what they look like but I’m excited. I was looking for polished to begin with so can’t wait!

[@drruru15]

HDMI Tips naww that's funny 😂😂

[@moparlifescatpack]

😂😂

[@magnuman008]

Will they work on SXT variants

[@moparlifescatpack]

Im pretty sure the exhaust tip set up is the same but you may want to reach out to the sellers first to confirm that before you purchase them. Here is the link to their site: raccoonperformance.com.co

[@robertrabe5885]

Pretty sure they won’t work on GT or SXT. My neighbor had a Challenger GT rental and I noticed it didn’t have the same tips as my scat. It had chrome bezels that were attached to the bottom part of the bumper.

[@moparlifescatpack]

@@robertrabe5885 I just checked their website and the SXT isn’t listed. Only shows these as fitment: 2015-2023 Dodge Challenger R/T 2015-2023 Dodge Challenger R/T Scat Pack 2015-2023 Dodge Challenger Scat Pack 2015-2023 Dodge Challenger Hellcat

[@shadow91628]

Just to confirm if I buy them, I get 2 right lol

[@moparlifescatpack]

Yes. Two sets of tips. One set for each side. 👍🏻👍🏻

[@thatmetalrocker9195]

Any chance they have them in chrome?

[@moparlifescatpack]

I don’t think so. I think they actually just started making these but you can reach out to them at Racoon Performance and ask.

[@Del-yd5qc]

their new website has the option to change colorways but obviously it comes with a cost difference

[@kevinmurphy9982]

They are now $289 and out of stock! Dayum

[@moparlifescatpack]

They do sell out quickly but they restock them as fast as they can!

[@wallabysydney7672]

looks awesome. was it 200 for each or 200 for a set of 2

[@moparlifescatpack]

$200 for the set plus shipping. For me was a total of about $220. Install was free …lol

[@wallabysydney7672]

@@moparlifescatpack thank you! any tips for getting the stock exhaust tips off? I loosened the bolt but can't for the life of me get the exhaust tips off. I have a 2021 challenger scat. From the factory they seem to have spot welded the clamp to the exhaust but even loosening the clamps and a couple hits of a hammer it aint budging.

[@moparlifescatpack]

@@wallabysydney7672 If they are on there tight whack the back side of them with a hammer towards to rear of the car. They 💯 % WILL come off they are just on there really snug especially around where the band is welded. Don’t be afraid to hit it with a hammer to help knock it loose. Check some of the other comments on here as another guy had the same issue and was able to knock his loose. Its just tight.

[@wallabysydney7672]

@@moparlifescatpack yes! i went and got a rubber mallet and they came right off. Thanks man they came out great!

[@moparlifescatpack]

@@wallabysydney7672 Awesome! I’m loving mine. Glad you got you a set!

[@jaylambert5915]

I got mine today. But my stock tip appears to be welded on. 22 scatpack widebody

[@moparlifescatpack]

Its not welded on. The weld you see is just to hold the band clamp in place. If you have trouble getting your stock tips off just give it a little whack with a hammer to help it come loose and of course make sure the bolt is loosened enough. I thought the same thing too when I first went to install them but they do come off…you just may need to add a little persuasion.

[@jaylambert5915]

Mine are definitely welded on. I have the bolt like yours, but the tips are welded on too. Weird. Off to the muffler shop.

[@moparlifescatpack]

@@jaylambert5915 I’m 100% positive they are not welded on. There is a weld that makes it look like they are but the lip of the tip sits between the outer band that is welded and the pipe exiting the resonator. If you whack the back of it as if to knock it toward the rear of the car it WILL come off. Its just on there a bit tight but it is definitely not welded even though it would appear that way. This is all assuming you have factory tips and no one has done anything before you. I thought the exact same thing as you but gave it lick with the hammer and took it right off super easy.

[@moparlifescatpack]

Give it a whack towards the rear on the side that has the weld and it WILL loosen its just tight but its not welded. You wont hurt anything.

[@jaylambert5915]

Lol I want to believe! I’ll try again tomorrow and see. I did give it a couple of wacks but not from the rear outward like you described. It is a stock exhaust with nothing done to it and it has the bolt so it wouldn’t make sense for it to be welded too. I just thought maybe some overzealous welder got a hold of it at the factory. I’ll update tomorrow!

[@user-qx1wl2um2k]

What a backwards world. The originals fit nicely in the lower valance. The new ones look like someone tried to put a round object in a square hole. I'll buy your original tips.

[@ViTrucker340]

I can’t find Sean on facebook to order these. What’s his contact information?

[@moparlifescatpack]

Since I’ve posted this video they have added a website. There is a link in the description as well as here: raccoonperformance.com.co BTW these things are sick! Look aggressive and sound aggressive!

[@ViTrucker340]

@@moparlifescatpack I just ordered them. Thanks!

[@moparlifescatpack]

Awesome! Be sure to let us know how you like them. Feel free to post pictures of yours on my Facebook group! Love to see them! m.facebook.com/groups/1436035977215715/?ref=share&mibextid=S66gvF

[@ViTrucker340]

@@moparlifescatpack thanks to you I got my leather seats from the same guy you order your seats from back in Dec. I sent him your video as well.

[@moparlifescatpack]

@@ViTrucker340 That’s awesome. If you have Facebook post some pictures of them on the channel FB group. I’d love to see what you went with! m.facebook.com/groups/1436035977215715/?ref=share&mibextid=S66gvF

[@delvonxmartin]

Dang, it looks like their sold out

[@moparlifescatpack]

Aww man. I’m sure they’ll have some more in stock soon! 🤞🏻🤞🏻

[@bigpapi9223]

Looks good but 300 for tips!! That’s ridiculous.

[@flynnzero9282]

That's what tips are costing. These are on the lower side. Don't be cheap.

[@bigpapi9223]

@@flynnzero9282 no, I bought 304 stainless steel tips for 90.

[@thebvandersnatch6975]

That is extremely expensive for 4" exhaust tips. Can get something equally good and looks great for $100-$120.

[@moparlifescatpack]

I haven’t seen any that look this good that are bolt on for $120 but if you know where to find them go for it! It would be a great $$ saver.

[@flynnzero9282]

You bought a $40K car but cannot afford $250 for tips? Get a KIA.

[@C3rb3ru5]

These are the only other bolt on option cause of the bell housing connector. I've been hunting for cheap trackhawk tips for a year. Now I'm buying these!

[@moparlifescatpack]

@@C3rb3ru5 for sure and these look 💯 times better than Trackhawk tips!

[@mikecio1]

Always sold out

[@moparlifescatpack]

Send them an email and you can probably reserve a set when they get the next supply! They definitely always sell out fast but that’s because they are a great product!

[@Alexis-zl9kw]

HDMI ☠️

[@moparlifescatpack]

😂😂

[@ufcufc6004]

Sorry it looks better before

[@moparlifescatpack]

😂

[@twiceonsundays]

Agree. The quad round tips look out of place on that stock diffuser that was designed to use the "large mouth bass" stock tips. Maybe some kind of square quad tips would look better. I don't know, but those round tips look like a goofy afterthought.