Finally dropping the z71 hoe ( 3/5 drop )

Belltech 2508 drop spindle
www.amazon.com...
Belltech 310400 street performance shock (front)
www.amazon.com...
Moog upper control arm CK80826 with 2 extra degrees for camber adjustment
www.amazon.com...
Moog K6541 lower ball joint
www.amazon.com...
Belltech 2410FF street performance shock (rear) www.amazon.com...
Belltech 6651 shock extension kit (relocation kit)
www.amazon.com...
Airlift 60748 1000 series rear air spring kit ( recommended if your finna have a truck full of people )
www.amazon.com...
Belltech 4923 bump stop
www.amazon.com...
Rear trailing arm relocation kit with shorter sway bar links
www.ebay.com/i...
Belltech 4230 Drop springs for Envoy/trailblazer www.amazon.com...
** not responsible for any thing you do on your own truck just showing what I did **

[@kingtony234]

Yooo that’s Dope!!

[@ari1234.]

Chevere! Why the trailblazer ones on the rear?

[@superior3384]

Looks good bro. I'm thinking about dropping mine . I'm thinking 3/4. Hopefully it'll look better. Because it has a big gap. Stock wheels. I'm not sure what parts I need . I don't want the camber problem. I want a good smooth ride no body roll

[@ya.boii_angel2828]

Barely seeing your message my bad and hell yeah 👍🏾 also mines used to be leveled and it had body roll now dropped feels like I’m glued to the road in a way still has a bit a body roll but I mean it’s an suv well atleast in my head that’s why and hopefully in the future front and rear sway bars will do the trick 👍🏾

[@superior3384]

@@ya.boii_angel2828 ok thank you

[@emmanuelvilla249]

Dammit boy 🥴💯

[@ya.boii_angel2828]

Thanks paps

[@highlands2188]

looks 🔥 💯

[@ya.boii_angel2828]

Appreciate it homie

[@jacobsimon9177]

i got a question does the lower control arm help w the camber cause i’m trying to drop mine and i don’t want that camber to fyck up the look of the drop yk

[@ya.boii_angel2828]

What’s up G ! My bad I don’t get notifications like that for KZbin but yeah I get what you mean but I’m not sure about the lower control arm I got the top control arm for the camber and it definitely helps a lot not completely perfect but it’s definitely not noticeable until you really stare at it I know IHC makes an adjustable upper control arm that can really help a lot and get you right !

[@cuhhchow8919]

If you take out the pads from the springs the top and bottom ones it goes 1-2 inches lower

[@ya.boii_angel2828]

Oraleee nice tip 👍🏾😂

[@orlandotovar4318]

Looks clean.. just needs some wheels 💯

[@fidelarrocete796]

“DeladoTahoe” Thanks for the video it’s gives me a idea of what I’m up against I got a 2002 Tahoe

[@ya.boii_angel2828]

Oh definitely not the best video cause I was learning my self 😂

[@alexseras4854]

Bout time you post 🤣

[@ya.boii_angel2828]

Neta

[@cristomeraa5799]

Can you post parts description! Looks clean bro!!!

[@ya.boii_angel2828]

Yeah bro the parts I got I put in the description and if you see a part I didn’t link just hit me up I got you

[@cristomeraa5799]

@@ya.boii_angel2828 thanks man! Great video! Got yourself a new subscriber 🤘🏽

[@armandopadilla9592]

What size Sawzall blades did you use im trying to do it the same way you did it

[@ya.boii_angel2828]

What’s up man for cutting the notch out ?

[@neidxox2770]

I have a question brother, there is no problem if I only use torque wrenches and put new upper A weapons without changing the splinters, is there any negative consequence?

[@ya.boii_angel2828]

Not sure what you mean 😅

[@bryangarcia1598]

Hey bro I got a question am trynna drop my 2004 avalanche but idk what drop if a 3/5 or 5/3 kinda new to this or what do u recommend I wnat it low as posible🔥

[@ya.boii_angel2828]

What’s up g 2wd ? Or 4wd ?

[@gojo-k4j-V2r]

where you get the carpet fo the dash 👀🔥

[@ya.boii_angel2828]

Damn bro long asssss time ago at flea market

[@Pureclika]

Aye bro I got a question I have a escalde thinking about dropping it but I have corvette style exhaust will that be a problem if the drop the rear?

[@ya.boii_angel2828]

Yeooo !!

[@ya.boii_angel2828]

Maybe bro my exhaust would hit a lot it was a 2.5 in pipe

[@chevyking644]

Wat u did to your Tahoe to make burn rubber

[@ya.boii_angel2828]

Before I did any mods nothing I literally put it into 1st and let it eat 😅 that’s with lsd and 3.73 but with posi and 4:10s it does it a lot more effortlessly

[@edwarde2068]

You gonna go lower later on bro?

[@ya.boii_angel2828]

Don’t think so homie it’s a 4x4 that’s good enough for me still gotta throw the wides up there and if it where a 2wd yeah I’d go lower

[@salvadorespino3545]

Give it some spacers

[@ya.boii_angel2828]

Gunna throw my 12 wides on there

[@edwarde2068]

U got the link from the relocation kit ?

[@ya.boii_angel2828]

Yeah g I got you

[@ya.boii_angel2828]

For the shocks or rear lower control arms ?

[@edwarde2068]

@@ya.boii_angel2828 lower control arms

[@ya.boii_angel2828]

www.ebay.com/itm/264944556843 you can use these or DJM but they had a long wait time so I just got the ones from the link and they don’t take long to ship

[@ale-gs8xq]

What headlights you got

[@ya.boii_angel2828]

My bad homie didn’t see your comment but got some clear head lights from Amazon they cheesy asf now 😭😭

[@diana2863]

U got a link to relocation kit

[@ya.boii_angel2828]

For the shocks or the rear lower control arms

[@ya.boii_angel2828]

Or also called trailing arm

[@diana2863]

@@ya.boii_angel2828 rear trailing arm

[@vtecbanger3180]

Does it handle good low?

[@ya.boii_angel2828]

Hell yeah big difference from it being leveled turning on curves feels a lot better

[@vtecbanger3180]

@@ya.boii_angel2828 I drive the east coast in mine between 70-90mph. Mines like new but I don’t feel right on winding highway

[@ya.boii_angel2828]

From the east coast as well 🤘🏾

[@vtecbanger3180]

@@ya.boii_angel2828 what state? I’m in Massachusetts

[@ya.boii_angel2828]

@@vtecbanger3180 nc homie

[@JoseTorres-mi9ju]

Don't put no super paisa stickers on it bro

[@ya.boii_angel2828]

Es puro show no te agüites

[@JoseTorres-mi9ju]

Ladiada? Naaaah

[@ya.boii_angel2828]

Yessuh gets a little sideways