Mcgaughy 3/5 Drop Kit Tahoe Yukon 24" Wheels

[@ReklezSuspensionWorks]

Thanks for watching! Don't Forget To Like & Subscribe. Buy your very own 3/5 or 4/6 Drop Kit Here: reklez.com/collections/tahoe-yukon-escalade-ext-drop-kits-shocks-2wd-4x4-awd

[@emmanuelprieto7785]

Does this kit also work for the Chevy avalanches ? 2007 and up?

[@tonyramirez1823]

I have the same truck how much the dropped?

[@nrgnrgclix8711]

How does it hold up while towing with passengers in the vehicle?

[@luussanchez258]

You think this kit would work on a 2007 gmc yukon 4x4 since the spindle has a center hole??

[@lucianogodinez9281]

@@luussanchez258 hey bro I got the same problem as you let me know what you did to drop it like a non 4x4 ?I want this 3.5 " drop too

[@angelvelasco2957]

Do a video on the full price ...

[@tomsmk3]

Would have loved to see the full install

[@Exodus-Automotive]

How far did this Tahoe get before that front upper control arm fell off? The ball joint nut is not install at 4:45 time on the video...

[@ranchocortez]

Im sure it came back yo your shop after the upper a arm came off the spindle because you forgot the bolt that attaches them together. No bueno

[@carlomendoza8588]

🤣🤣 good thing it’s a 2wd also or they would had to mess with a cv axle.

[@Exodus-Automotive]

noticed at 4:45 time on the video and was like WTH

[@420phatboy420]

I got 2015 Yukon Denali on 305/40/22 I want to lower close gap in rear with kit so it won't rub or have problems

[@louisv6007]

Are those rear shocks part number 2410FF? From belltech

[@majorwilkesjr.5827]

This is truly what I want . Drop and rims . What is the name of the rims ?

[@MrNoe713]

clean ass look. my question is about the upper ball joint does it have a nut on the bottom?

[@luisvillalobos4976]

Can you give us a description of the products for lowering parts needed and where to find them . Thanks

[@elmeromerochitown8476]

3rd gen tahoes have the best looks.

[@brehoffm]

Was gonna get rid of my ‘07 then the new body style came out and I decided to keep it! Haha

[@304cortez85]

I agree specially with the badge and molding delete.

[@eltorovlogs7681]

Great video! I have the 3/5 drop on my tahoe, but they never took out the braket from the back so im always hitting on bumps, can you guys do a 4/6 video, i want to go lower but they told me i need someone to fabricate a c noth for that, is that true?

[@Jeremywalsh7]

I dont see you needing a c notch but definitely gonna have to cut the entire rear bump stop bracket in the rear above the axle.

[@carlosorozco12]

If you lower it 4” from the back you still need to cut the braket? O just remove the bump stop o cut the bump stop ?

[@chatobalencian1504]

What was the part # for the drop spindle for the front I wanna do it to my 08 Cadillac Escalade

[@katyreesimpson8742]

Do you need adjustable upper or rear control arms?

[@tangomantactical]

That is EXACTLY the stance I want. I have a 08 Yukon Denali with 24" Serria replicas that ride on 305/35's. I have been told numerous times I can't do a 3/5 drop because of my air ride......but I've been seeing numerous ppl doing it. I've been a auto-body technician and collision painter for 32yrs. So, although I'm not a mechanic, I know my way around a vehicle along with $60K in tools. Can I order the kit from you? I know how to cut all of the rear-end overhang bump stops off and clean it up. You would never know it's been cut on. I've sprayed HOK, a freehand flames, scallops, stripes ect. Bikes, restos, 100 point Sema cars(only one or two). Any information would be greatly appreciated.

[@isaelvictorio7077]

Did you ever did the drop?

[@tangomantactical]

@@isaelvictorio7077 i havent yet. I became very sick and was hospitalized. I lost almost 30lbs and literally almost died. I am back up on my feet again and just started a new job about a week ago. I still want to. I don't even remember all the part#'s of what I need. I'm a autobody and collision painter, not a mechanic per say. I can do some basic things, but nothing I depth motor or tranny wise. With some help from some friends I know it can happen. I can not stand how it sets. So, hopefully in a couple of months I can resume that project. Let me know if there are any special parts I need. I do know how to mix and tig weld, also run a plasma cutter. I have all three. A 3/5 drop is what I'd want. 08 Yukon Denali with air ride.

[@marceloayala7192]

No shock extenders used ??

[@martinolivas319]

If I took a dip too fast will the 24s hit fenders

[@jameswatson6460]

I have a small question. (07 tahoe 4x4 5.3l) As far as cutting the bump stop brackets... Is there something you can put as a small buffer in case you completely bottom out? Like a two post lift pad or something like that to protect the frame? Obviously with a 4 finger(ish) gap im curious if it's even worth it. I'm thinking 295/55r20 on a 20×9 wheel when I do my 3/5 drop.

[@Tkssa580]

Would this drop kit work with the LTZ air ride suspension?

[@jessegonzalez3011]

@ 5:13 i dont see a upper ball joint nut???

[@launchcontrol6438]

I just did stock shocks and struts on my truck but I wanna lower it with this kit do I need new shocks or can i use the stock ones?

[@CharlesUFarley5550]

Is this the same for escalade

[@whacha559]

What brand shocks did you use in the front? Like your video 💯

[@obsccsb]

What relocate brackets did you use??

[@javiermiranda5436]

Did you Use factory shocks in the front

[@DoeBoieLokz]

Great video, but how about rear lowering shock Extensions for a 03 tahoe

[@ReklezSuspensionWorks]

We use a shorter shock so it rides great without them.

[@DoeBoieLokz]

@@ReklezSuspensionWorks ok well thanks for the info, again great stuff you show on this channel 👍👍

[@paulsalmon4771]

24"s are perfect on these GM trucks

[@AaronFaucett]

true, i want these rims, they are 24" factory.

[@tuff419]

Do u have a video do a drip like this on a 07 suburban LTZ.

[@toenrock]

Can you use the djm drop spindles on the escalade ext’s?

[@carlosorozco12]

I have a question I bring down my 2008 gmc yunon denali 3/4 I want to go 5” rear but I want to know if I can use the same extensions that I already have or do I have to buy different ones to be able to go 5” rear…. What I mean is, for example, if I buy a 3/4 lowering kit, can those extensions be used to go 5” and 6” back or not?

[@gilbertopedraza7715]

Does this 3/5 drop also work on a 2007 Chevy 4wd ?

[@ReklezSuspensionWorks]

Yes this kit will work.

[@nestormurillo3901]

My question is did you guys use or can you use the same original lugnuts????

[@edwardrendon5487]

Hey man I’d like to see something like the safest way to unload a spring from a 88-06 Chevy. I don’t know if I’m just not using my spring compressor right but sometimes it goes smooth and other times it gets sketchy

[@ReklezSuspensionWorks]

We can do a video of that for sure. Thanks 👌

[@Aj.808]

What about the swaybar endlink on the passenger side wouldn't it hit

[@sergiozavala9133]

How do you get rid off the abs traction control and stability track lights and the ebrake I reinstalled the abs sensor and still turns on

[@dontrompas1312]

What would work better a lowering spring vs a adjustable coil over for a front drop...i already have a 2' inch drop spindle on s10...but would like to go lower...

[@ReklezSuspensionWorks]

Adjustable coil overs would handle better.

[@adrianreyna5789]

Is there any way to get the Tahoe and the suburbans slammed with a 5in drop on the front and a 7in drop on the back

[@chevyboiii2115]

I have the same drop kit brand bit 4/5 n my alignment is not good cuz of the control arms what do u suggest to do or get tia!

[@ReklezSuspensionWorks]

Call us can be many different issues. The very best thing to do is to stop by our shop to check alignment.

[@marcelinosandoval1551]

I had my 2007 Tahoe dropped 3/5 and it hits hard from the front. I put bump stops on the rear myself so it doesn’t hit in the rear only in the front

[@martinolivas319]

That's what I'm worried about, bottoming outin front. What did you do to fix this

[@DaGMLowLife01]

You think on 24s and 3/5 drop youll still be able to tow

[@Marc-yg7gy]

Have a 2007 Escalade all-wheel and I want to lower what do you suggest for a kit

[@davidybarra7171]

CAN U RECOMEND A PLACE WHERE I CAN GET THE BUMP STOP BRACKET CUT OUT HERE IN THE DALLAS FT WORTH AREA..?

[@bige3510]

Hell yea!! I been looking for a video on this vehicle I got a 2007 ho and I’ll be buying this kit from y’all soon ... been debating a long time because it is the family ride and ride comfort is 100 for me I got the same rubber size too

[@marksantana]

@Reklez suspension works 2/4 on a LTZ TAHOE

[@tomsmk3]

There was no need for shock extenders for this truck?????

[@franciscocardoso2607]

Did you guys use the Silverado drip kit on the Tahoe

[@oSTYNCLSYo]

Will 24" rims fit on stock suspension?

[@ReklezSuspensionWorks]

Yes

[@oSTYNCLSYo]

@@ReklezSuspensionWorks cool, thank you.

[@carlosorozco12]

does not rub when turning the wheel ? I drop my gmc 3/4 but i dont know wich tire used i have 305/35/24s

[@jrv559]

Is it the same for older GMC Yukon Denali's too? Im planning to do the same drop kit but in the rear only i drive a 2002 Gmc Yukon Denali Awd

[@brehoffm]

I have an ‘07 Tahoe on 24’s. I want to do a 2/4 drop, will I have any issues with rubbing when turning?

[@justinsutherland1822]

I have a 12' 4WD. Whats the offset on those wheels? Or what is an acceptable range to use. Also on the website it says " (Must Have Cast Steel Arms 4x4 Model) " Would that mean stock? Do we need to buy them from you all? I know in the video you installed some because the owner had a lift prior.

[@jaimecano3911]

? Got a 3/5 on my 08 gmc crew cab y does it bottom out alot wen i got 2 ppl in back seat

[@stricklywarponys-in2td]

Y’all didn’t drill the whole for sway bar ?

[@stricklywarponys-in2td]

That’s what I was noticing 🤔

[@donovanpetty]

Can you do a 3/5 drop on a 4x4 Tahoe same year

[@williamg9570]

Can we get a 2019 years Suburban on a drip kit. I got 3053524 wheel and looking for a drop that won’t cause too much rubbing. Maybe some bags on a burban

[@DKLONGHORN]

Since they're factory struts, will the ride be any stiffer or just like factory?

[@ReklezSuspensionWorks]

With factory starts it keeps the ride smooth and comfortable.

[@alexlowvato]

Question I have the same drop but am having outer tire wear on driver rear and inner rear passenger any ideas?

[@joeroe2839]

Your diff needs the pan hard bar adjustbale one , also do u have all rear links and relocater bar brackets

[@marcelinosandoval1551]

I got my Tahoe dropped and it hits all the way around .What can be the problem?

[@paulsalmon4771]

did you have to do a brake upgrade?

[@BlackAtomAnt]

I have a 2004 Yukon Denali XL it’s all wheel drive. Would that kit work for me?

[@rickjames3220]

Ay i have a 2000 Yukon Denali 2wD my question is how do I lower it if mine came out with no springs in the front wats the lowest cost or kit do you recommend Partner

[@chevytrokiando2771]

Do it hit on back with the 3/5 drop

[@BrianGomez-hy6bd]

Where I can get those rims "24

[@300ghost4]

How much does a Setup like this run for? Also Labor price

[@davidmendoza9455]

How much is the drop kit an how much for installation on something like this?

[@jameswebb3932]

Excellent video and explanation of everything. I'm definitely subscribing.

[@JCsWorlddd]

I just bought a 2008 yukon slt1, if I bought this kit from your site would it fit? And would i have to buy anything else ?

[@jabiru4026]

Looking to put 24's on my '15 Tahoe... is a lowering kit like this something I should be investing in?

[@ReklezSuspensionWorks]

Yes use tires 295/30/24

[@blvcksxcial993]

How can I fit smaller wheels anything smaller than 20 scrapes my strut

[@AdrianRodriguez-nt6hq]

quick question what brand do yall Recommend around 1 set of 4 tires around 800-900 money range ? help me out im to picky

[@charlieocean9785]

Do you offer a similar drop kir for the older Tahoe 98/99. All stock 2wd at the moment. Needs a lot of work but I want to get an idea how much$ to get it looking pretty low but not cutting or tubbin it.

[@ricardocasillas7805]

My ABS and Traction Control came on when I had my 4/6 Drop installed in my Tahoe is this normal for it to turn on when installing your kit ?

[@bearwhocares9539]

No not normal

[@Carlos-mm1bt]

what rims are those

[@ricardomolina787]

You guys did great work 😊😊

[@marcelinosandoval1551]

How much are the drop kits for a 2007 Chevy Tahoe

[@christopherchavira2948]

Love you’re videos always crushing it👍🏾😎

[@ReklezSuspensionWorks]

Thank you for the support 👌👌👌

[@TODOTERRENOALV]

Would this work on a 2002 GMC Yukondenali ?

[@gerardoescobedo1062]

How much it’s lowered kits

[@TODOTERRENOALV]

Will it still hit the frame ?

[@nrgnrgclix8711]

Will it sag or bottom out when you tow anything or with a full vehicle?

[@bearwhocares9539]

Yes

[@AaronFaucett]

which rims are those from chevy, i really liek those.

[@vincentmartinello8055]

Was the top ball joint bolted and pinned on?

[@ReklezSuspensionWorks]

No, Mcgaughys uses a self locking nut that snugs into the spindle. It dont use a cotter pin either. Thanks for asking.

[@marcelinosandoval1551]

How can I get that fixed

[@cassellracing]

I don't understand why this kit wont work on Factory AirRide, both systems are the same outside of added electronics ?!?!

[@oscartemores1746]

Do you guys have a shop in California?

[@250rTriker]

4:45 your upper control aren balljoint is missing the nut. Disaster waiting to happen

[@montoutedaniel]

What kinda wheels are those.

[@jerrygarcia2178]

love everything about you guys

[@nbsaddiction1522]

Got the same tires size but there on a 15 silverado ls 1500 I want to run 26s next but not sure what kit to use I also got 2 inch drop shackles in the rear and stock up front any help would be sick

[@gregschulties6020]

I have 26'S on my 14 silverado with a 3/5 mcgauhys kit and they rub a good bit,I'm going to sell the 26'S and drop to a 4/6 with 24's. Looks better imo.

[@edgartarin9929]

does this kit work for AWD 2008 Yukon Denali

[@ReklezSuspensionWorks]

Yes it does.

[@elmeromero9288]

First time ever I disagree with you, @6:00, it will bottom out, that's about 3 inches of clearance... but nice job as always.

[@Bat_man-pn3qi]

Do you all sell the relocation bracket and lower sway bar end links separate

[@ReklezSuspensionWorks]

Yes call us to order. In stock and can ship.

[@quintonbrown9396]

Do you sell a 2/4 Drop kit for the 2014 GMC Yukon 2wd?

[@alfredomontero289]

hey nice job im trying to drop my 02 escalade what do u recommend. let me no thanks

[@ReklezSuspensionWorks]

I recommend to call us. Thanks

[@jimwhitehead2313]

Upper ball joint missing the nut @ 5:26

[@luisgarzon3097]

How much is the price on a job like that?

[@oscarmagana1880]

How about a 2004 yukon denali lower it

[@ricardovenegas2116]

What are those rims called?

[@ReklezSuspensionWorks]

Not sure

[@josefigueroa4161]

They're carbon wheels

[@ricardovenegas2116]

@@josefigueroa4161 Thanks

[@escaladetay8974]

Ricardo Venegas 779 style wheels

[@escaladetay8974]

Ricardo Venegas comes on silverados

[@MrJiblack]

Thanks for showing the process. It really helps me when I lower my honda.

[@gregdeleonc107]

How much is a drop for a 2004 tahoe in 24s