FINALLY! How To Easily Install Pix4D, Litchi, etc on Phantom 4 Pro Plus REMOTE!

How To Install Pix4d - 1:10
Micro USB Cable: amzn.to/2v5nM6O
How To Install Litchi - 4:30
How To Install AirMap & B4UFLY - 4:19
In order to download Pix4D to your Phantom 4 Pro Plus remote, you need to search for "APKPURE" app on the remote's web browser. Download "APKPURE" app and THEN search for: Pix4D & Ctrl+DJI. Double tap the install button and the apps will be installed!
╔════| FPV Drone Gear╞═══════════════════════╡
║ ►Fat Shark Attitude V5 FPV Goggles: amzn.to/2JRjIfi
║ ►FrSky Taranis X9D Plus Radio: amzn.to/2NmEZiM
║ ►TBS Diamond TX Antenna - 868 to 915 Mhz: amzn.to/2pBbVvf
║ ►TBS Crossfire Mirco TX: amzn.to/2rd2YIF
║ ►TBS Crossfire Nano Rx: amzn.to/32qv8Ny
║ ►ImpulseRC Alien 5" + KISS PDB w/OSD - Mr. Steele: amzn.to/2NKCber
║ ►KISS FC V2 - 32Bit F7 Flight Controller: amzn.to/2NNgkmL
║ ►Flyfuino KISS 32A 32bit ESC: amzn.to/2rfdz5X
║ ►TBS Unify Pro 5G8 HV Video Transmitter: amzn.to/36DoZkb
║ ►TBS Triumph Antenna 2 Piece Set: amzn.to/2pBeP37
║ ►TBS Ethix Mr Steele Stout Motors V2 1700KV: amzn.to/2Cjh65r
║ ►Ethix Propellers: amzn.to/2Nkafir
║ ►5/8th Wrench for Propellors: amzn.to/2pJsAfS
║ ►RunCam: amzn.to/2PRJqUK
║ ►RunCam WIDE Angle Lens: amzn.to/2NJ1m19
║ ►GoPro Hero5 Session: amzn.to/33lr3LL
║ ►GoPro Hero5 Protector Replacement: amzn.to/2Nkf5MD
║ ►3D Printed 30 Degree Angle Mount for GoPro Hero5: amzn.to/2NofY7b
║ ►300W 14A Pocket LiPo Battery Charger: amzn.to/32gBtLn
║ ►Battery Charger Power Supply: amzn.to/36HUF8j
║ ►Batteries - Thunder Power Adrenaline V2.0 1300mAh: mlsp.co/l815l
╚═════════════════════════════════════════════════╡
╔════| Drone Repair Equipment╞═══════════════════════╡
║ ►Weller 40W Soldering Station: amzn.to/32ntGv4
║ ►Delcast Solder Reel: amzn.to/2JRpyNK
╚════════════════════════════════════════════╡
╔════| Beginner Drone Gear╞═════════╡
║ ►Phantom 4 Pro: amzn.to/2zwfvb5
║ ►Mavic 2 Pro Combo: amzn.to/2ZCOqxy
║ ►DJI Spark Combo: amzn.to/2MNYBcZ
║ ►DJI Spark Traveling Case TOUGH: amzn.to/2UjGhvi
║ ►DJI Cable for iPhone: amzn.to/2X7vdDk
║ ►DJI Cable for Android/Tablet: amzn.to/2Gd4E8T
║ ►DJI Spark Propeller Replacements: amzn.to/2BdCIT7
║ ►Camera is the iPhone 7+: amzn.to/2KWitsM
╚══════════════════════════════════╡
*above are affiliate links back to Amazon & GetFPV.
*Maverick Aerial Photography LLC is a Licensed & Insured Drone Pilot.
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → mlsp.co/l73q6
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ I couldn't fly FPV without YOU!
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Visit My Website ►www.maverickaerialphotography...
Find Me on Instagram: ► / mav_rick_william
Find Me on Facebook: ► / maverickaerialphotography

[@DroneMaverick]

I recently found out that there are two kinds of micro usb cables, one for data transfer and one just for charging batteries. You need the micro to usb data cable here: amzn.to/2Uymgna

[@okeychimeziri6600]

Bro just stumbled into your page, pls can you do a comprehensive tutorial on mapping for newbies using pix4d, i assure you millions will ever remain grateful to you 4 this.

[@sheervengeful]

You just saved me!!!. Thanks brother!!!!

[@hollowstudios2015]

Thank you so much for posting this.

[@DroneMaverick]

David Love hope Pix4D works great on your remote!

[@rexated5148]

Hella fella here!!🎉

[@carlosgerardomurillo1623]

Great Video dude! Keep up the good work!

[@DroneMaverick]

Thanks! Will do!

[@netizenbarbar7834]

Thank you so much, it work completely.

[@DroneMaverick]

Awesome! Glad to hear! 👊🤠

[@abdoulayekadiatousow8950]

very important message I had a problem with this but it solved. thank you very much. From Guinea conakry

[@davidbrillhart7331]

Perfect. Thanks!

[@DroneMaverick]

David Brillhart awesome! You’re welcome!

[@DanteParducci]

Awesome. Thanks! I was struggling updating the controller. Dji support couldn't give me a solution. for $25 Litchi has way more options and the maps finally work.

[@DroneMaverick]

Awesome! Glad this video is helping you.

[@gb2531]

Big time thumbs up for this video and the follow up video for the USB authorization! I hope to run a Pix4D flight once the appropriate cable arrives. Very useful content.

[@DroneMaverick]

Awesome. Let me know how everything turns out!

[@gb2531]

@@DroneMaverick unfortunately, I am unable to get the pop up box when connecting Ctrl+DJI when the cable is connected to allow permissions. I'm not sure if this is related to version 4.2.2 on the controller, but I've followed the instructions and cant seem to get the connection. There does appear to be slight differences in the settings menu items.

[@Kall_sta]

@@gb2531 Hey, my team is also quite desperate to get pix4dcapture onto our P4+ Pro V2. Were you able to fix this at all? Thanks in advance.

[@soulmaster6665]

@@Kall_sta same as you, but 2 years later. Did you find out how to run? I still didn't get the pop up message box. Thanks in advance.

[@BoysonKyte]

Ok I have the Phantom+ and I DL the Litchi app and to shut down DJI go you go to settings and location and this is where you can stop DJI app and then after 5 hrs of trying things, It works. Thanks to your video for the idea.

[@BoysonKyte]

I mean it took me 5 hrs to figure a 3 min fix. no cables needed on DJI Phantom 4Pro+ V2.0 with DJI 300k monitor

[@DroneMaverick]

@@BoysonKyte Awesome man, glad the video is helping people like you!

[@humbertorivera7080]

Sounds awesome!, im looking to buy my first drone and I figured out many people saying " for mapping dpi phantom 4 plus CANT DO THIS!.. and I was thinking to buy dpi magic 2 pro, but its not my 100 choice because I see the 60 fps of Phantom and that really make the difference!. So, the problem was fixed with phantom 4 plus!.. thank you!. its was pretty helpful for me!.

[@DroneMaverick]

Glad the video helped you out!

[@koolhand12]

Look at the Phantom 4 Pro and not the Plus. The controller will not come with a screen. You can use your phone or an IPad Mini (preferred). Better way to go overall...

[@mahendrajayawardena6433]

Excellent that thank you

[@DroneMaverick]

Glad this video helped you.

[@collegedr]

do you happen to know what version of ctrl+dji and pix4dcapture you were using at the time of the video?

[@dustinoran2394]

BRO! You just saved me $999! Everything worked perfectly and I really appreciate the video. Will be subscribing and following.

[@DroneMaverick]

Dude, that is so awesome! Glad the video saved you a boatload!

[@dustinoran2394]

@@DroneMaverick one last question for you if you don't mind is I downloaded the litchi app but I'm having a hard time thinking it to my drone. Do you have a video for that?

[@DroneMaverick]

@@dustinoran2394 Great question. I used a micro USB cable and the app connected to the drone.

[@DroneMaverick]

The same way you connect USB to micro on the remote.

[@31Solvap]

thank you sir

[@DroneMaverick]

Glad this video helped you!

[@muhammadtayyabafzal1632]

I appreciate your effort bro... Can you please figure out the way to install drone deploy in Phantom 4 pro built in screen.

[@DroneMaverick]

I appreciate you! Sadly, I already sold my P4P+

[@leroyjackson4143]

Hey man , it works thank U

[@DroneMaverick]

You’re welcome Leroy! Glad this video helped you.

[@tauchbotitya]

How to do it ?

[@ricardojaviergarnicapena6749]

Hi, nice video. I've tried step by step instructions but when I try to install ApkPure I receive this message "not enough space to install". RC has 2.83 Gb of spape to install but I cant install. Could you help me? Thank you

[@rockerjs53]

Hi could you do a video on how to use pixxd4 for the first time and how to get the map you want for doing a survey

[@emireastwood5000]

Thanks for this great video :) I have DJI Phantom 4 pro v2 and i need to know about this work: Did you upgrade your drone with any equipment or do you use your drone as original? Also, what is the accuracy of the map for your work?

[@DroneMaverick]

Emir Eastwood Great question! The remote came with the drone when I bought it, so they were already paired together. If you want to see one of my maps, head over to www.maverickaerialphotography.com

[@emireastwood5000]

@@DroneMaverick Thank you so much for your answer. Keep going ;)

[@lidahoem9328]

@@DroneMaverick My drone is Phantom 4pro plus V.2 it have remote came with drone but that pix 4D can’t be connected with drone . Can you show me?

[@scottlarson8090]

My man!! Holy Crap that worked!!

[@DroneMaverick]

Awesome! So glad this video was helpful for you man!

[@AizamPutra]

hello just want to ask do this method still working until now?

[@moisesaraque]

Hi, I have p4+ with GL300K, I tried with pix4dcapture without sucess could you help me? I try but DJI+Ctrl did not conect.

[@MagicBiscuitShow]

Heya, does LItchi and Pix4D still work on the P4 Pro Plus < v2.0 > remote ... since DJI installs the "NO Rollback" firmware when we update our firmware each time? I think that I saw somewhere that it does not. I would like to have Litchi & Pix4D on my P4 Plus v2.0, but ONLY if I know it will work. Thanks, Chuck (N.E. Florida) : +)

[@PartyMartyProductions]

what are these apps ? and what are they meant for ?

[@vernstrong3715]

Thanks much for the helpful video. I downloaded the amazon appstore app file to my P4P+ controller but when I try to install I get an out of space message even though there is plenty of space on my device. Any advice?

[@DroneMaverick]

You can uninstall apps that aren’t being used to free up the space you need for Pix4D. Uninstall WeChat, Instagram, Twitter, and Facebook. They have little value on your P4P+ to begin with.

[@brockkv]

Dude good video. I am having a fit because I can't download my video productions from editor to the SD or download them to my computer or phone. Do you have any suggestions? DJI is telling me it is impossible. Nothing is impossible.

[@DroneMaverick]

Kenny Brock The editor might need the original file on your SD card in order to download.

[@DroneMaverick]

The editor I believe is just a low quality snapshot instead of the actual file. I could be wrong though.

[@gc3ds448]

i followed the steps second by second. did the installation and it installed everything. but i keep getting a message that unfortunately, pix4d has stopped. now i am too afraid to do a test flight and the app crashes mid flight

[@robolson2691]

Recently purchased the Phantom 4 with the GL300K controller, in ignorance of the 3rd party app connectivity issues as documented here... Pete Morgan indicates that the USB loop does not work due to the USB port being a date in only. HAS ANYONE HAD ANY SUCCESS IN CONNECTING THE INSTALLED 3RD PARTY APP TO THE DRONE AND MAKING IT WORK? thanks Rob

[@heyhey6333]

hey drone maverick, do you fully trust these apps? and have you had any problems since installing? thanks

[@DroneMaverick]

I uninstalled Facebook, Twitter, WeChat and Instagram on my P4P+. I trust Pix4D.

[@engineeringschool28]

Hello I have a phantom4 pro v2.0 I followed your procedure but unfortunately mine does not connect. Can you help me please?

[@georgekatopodis1673]

Hey Drone Maverick, great video! Have you figured out or confirmed if your process works on the Pro + V2.0 controller (GL300K)? Have you figured out a process for Drone Deploy? Thanks for your videos!

[@DroneMaverick]

No luck with Drone Deploy yet! Bet there is a way though.

[@AMERICANRED]

@@DroneMaverick Pro + V2.0 controller (GL300K) works with litchi?

[@DroneMaverick]

Edynsson Caballero Litchi does work with V2.0 but only when you’ve downloaded “Amazon Go” which is an App Store.

[@AMERICANRED]

@@DroneMaverick I trying, i dowloaded, but cannot install. Did you know what happen? I have GL300K

[@DroneMaverick]

@@AMERICANRED I would try downloading both apps again.

[@KKKMMMMMM]

There must have been an update because I tried followed this and now when trying to install pix4d and Ctrl+DJI in Apkpure I get an error with both apps saying “Your device isn’t compatible with this app” and after I still proceed to download it at the end after it downloads it says “Installation failed.” Any idea on a workaround this? Thanks

[@noelbusoytv5830]

Why it didnt connect ctrl dji to my phantom 4pro+ ver. 2?

[@skeyesightvideo5878]

I'm currently trying to put litchi on my p4p plus and hoping this will work. I have paid for and installed the litchi on a mobile device for other dji drones. Hope its not going to ask me to pay again.. Thanks for the tutorial and hoping it works👍🤘

[@DroneMaverick]

Let me know if Litchi is working on your P4P+ !

[@skeyesightvideo5878]

@@DroneMaverick Thanks so much for your response. It didn't work. I have tried putting Google play on because that is where I originally purchased litchi. But now Google play won't let me log in. Also trying to install it on an iPad. And that won't work. It says installed but it isn't on that device. I don't want to keep paying for the app when I already have it.🤔🤨 Sorry for the rant.

[@skeyesightvideo5878]

Update on litchi... Installed on my p4p plus and doesn't need the USB cable. Did it through Amazon. Planned a short waypoint mission last night and will let it rip today. Thanks again for your time to respond. Appreciate it. Terry

[@jasperdillberry4485]

Thank you! Works a treat. I also installed Map Pilot Pro this way and while it runs there is an error warning in the background saying "Map Pilot Pro wont run without Google PLay services which are not supported bu your device. Any ideas how to fix this?

[@DroneMaverick]

Unfortunately, I ran into the same issue and could not install Google Play Services to make it work.

[@sneakmcgee3830]

@@DroneMaverick any luck since?

[@rinexco8]

Parse error appears and i cant install Ctrl+dji or pix4d please help me

[@yassembakoko607]

i may the correction as u said on ur last video regarding developper mode but still

[@DroneMaverick]

The USB cable needs to be a “Data USB” not a “Charging USB”

[@KENAROF]

btw what hardware/phone you have to connect these aplk...?

[@DroneMaverick]

Great question, you don't need any additional hardware. The touch screen comes with the P4P+ Remote.

[@lesrob09]

This is not working for me. Watched both videos and followed all steps. I even uninstalled the ctrl + Dji app. The popup dialog box just does not show up. The usb is connected as storage. Am I supposed to disable the DJI GO 4 app?

[@lanceboyle7836]

worked as described. But Pic3D requires setting up an acct for their 15 day trial period.

[@DroneMaverick]

Yes they require a monthly or yearly subscription.

[@hrvojelukacic3636]

I tried doing this but I cant get the pop up message, can you help me?

[@cmdrefstathiusplacidus9003]

so I just got 20-hour used p4p pro V2, onen is the advance and what is regular. I can't even get my tablet to recognize the drone the advance one is working but then I noticed there was no mapping software on it the whole entire reason I got that one other than it was brand-new not even activated so I would have to one is a backup on-site. I'm working through all of the compatibility issues right now with Android and discontinued software, glad I ran into this video. hope it works. how in the hell did you figure that out 😂

[@davidwhitworth6470]

Did you make it work with the V2? I’m having the same issue, but following these guidelines doesn’t seem to connect in Ctrl+DJI

[@z331771]

Hello, how do I downgrade the machine version to 01.04.01.00

[@ForkYouPresents]

Thanks very helpful ...but when I press the Amazon App Store install, it comes up with the installation error ( this application is not authorised by DJI please contact DJI support ) anybody got any answers or workarounds , much appreciated in advance… I would love to get litchi going as my maps don't work with any of DJI's current /or previous firmware on my plus screen

[@ioannistsonos3899]

i have the same problem :-(

[@guilless2746]

hello , I have de the gl300k and followed your direction for both videos, even the developer mode and the usb debuggin, but when I plug the usb and mini usb it dosen't allow me to open with an app option, just get a sign for acces files from the computer, any idea what could be happening, gracias saludos desde argentina

[@bejaysus23]

I'm having this same issue, were you able to resolve it?

[@MiguelAngelBriones]

Hello, I don’t know why I can’t install the pix4d app, it’s like is not working

[@airadaimagery692]

Any luck with the Drone Deploy download? Thanks!

[@DroneMaverick]

1k horsepwr I was looking into this today. If I figure it out, I’ll upload another video!

[@airadaimagery692]

Drone Maverick awesome!

[@georgor1980]

I have GL300K ... no pop up... any solution found yet? Great vid btw

[@DroneMaverick]

There are two types of micro USB cables, one for charging and one for data transfer with charging. You may be using the cable that’s for charging only. The pop up only works when it sees a micro USB data cable.

[@georgor1980]

@@DroneMaverick I used one from an android tablet. I thought it was for data. I get though a message that the usb is plugged and an SD icon ok the top

[@carlosbustamante8474]

@@georgor1980 I do get the same icons. Could you connect it ? And what did you did?

[@indrajohanes658]

i have try pix4d capure but crash in middle mission, app stop not working, any solution? and what version your controller firmware?

[@DroneMaverick]

I did a factory reset and downloaded Pix4D

[@yassembakoko607]

Hi Marvick thanks for, but hw do u make de difference

[@DroneMaverick]

This company makes them - amzn.to/3p3O5BH

[@KENAROF]

thnk u for finx4d cannt runing....ally..but i have difficulty to connect apl with mine..ph4pro v2.0...the ctrldji and pixx4d canot running...

[@DroneMaverick]

KENAROF watch “Step 2” video to fix the USB problem. Let me know if this fixed your problem!

[@KENAROF]

@@DroneMaverick hi..thanks for recommm...but what isee..is..your phone could connected with your apl...my apl..was connecting but on the apl of ctrl+dji screen the tab of battery was not showing number ..(still N/A).. When im press the button of pix4d ..the apl was showing but still not connecting..(sign of antenna and battery not green or you know thts .not glowwing..heheh im sory icant reachable with this lnguage)😃😃😃

[@brilygunawan8501]

the message not pop up, when i plug the usb, how?

[@ashleytoves458]

Any way to get Drone Deploy? Thank you!

[@DroneMaverick]

Drone Deploy needs all the bells and whistles of the Android operating system in order to work. The P4P+ doesn't have those features. Thanks for asking!

[@rustanjayceeflores5841]

sir good day! what will happen if i will factory reset my built in screen GL300k?will it also remove the pre installed DJI GO app? and does enabling developer option affects the connection of drone and ctrl+dji? i have followed your video and still i can i cant connect my drone using ctrl+dji. i hope you could help me.. thank you and god bless

[@DroneMaverick]

Every app you installed will be gone but once you do, they are easy to install again.

[@rustanjayceeflores5841]

@@DroneMaverick thank you for your response sir. may i ask if even the pre installed DJI GO will be gone? or the applications that came with the built in screen sir? because it is there when i got my drone.

[@evanpointer5735]

When I try to install the apk downloader it gives me an error that says "Installation Error: This application if not authorized by DJI." Any help with this?

[@DroneMaverick]

Evan Pointer maybe a fresh download or reboot the remote.

[@2252ryan]

Rick for some reason I can't get my Phantom 4 Pro Plus to connect to Litchi. The apps runs but can't see any image (the drone camera view) through the program. Any thoughts? Thank you.

[@DroneMaverick]

The micro USB cable must be for data. Some cables are made for charging batteries only.

[@2252ryan]

Very interesting. Will give that a shot. Thank you!

[@sueshelton1266]

Is the Phantom 4 Pro+ V2.0 supported in your instruction? I'm new to drones and didn't see where you detailed your drone.

[@sueshelton1266]

Wasn't sure if you had V1.0 or V2.0

[@Mike12mt]

So i"ve installed airmap to my P4P+ remote but the app needs "google play services" to run, then the app says the remote doesn't support those services. How do I get this to work?

[@DroneMaverick]

The last update on the P4P+ remote might help. They haven't updated the software for a while I think.

[@MrArczon]

pix4D 4.3.1 ctrl+dji 1.9.1 + USB cable this version works with P4P+ no crash

[@davidfeilmeier6743]

I do not get the pop up message after I plug the micro and usb chord in

[@DroneMaverick]

Have you watched the second video? I explain a step I forgot to mention about the USB.

[@davidwhitworth6470]

I am getting as far as opening Ctrl+DJI and plugging in the cable. I don’t get a pop up, and then it says Disconnected. Anyone got any tips?

[@dodore001]

Same here..No message and no connection between the DJI+ and the drone so Pix4d can even work. Please help anyone?

[@tauchbotitya]

I followed your instruction but it didn't pop up anything and still disconnected even I followed your 2nd video to change to developer mote. Please help!

[@DroneMaverick]

The last thing I would recommend would be to reset your remote to factory default and try installing Pix4D again. There is a slight chance that the cable your using might not work for the P4P+ remote. I did have that issue before, and now I don't anymore.

[@tauchbotitya]

@@DroneMaverick I followed you recommend and instruction but Pix4D still not connect with my P4P Pro V2.

[@tauchbotitya]

Do we have to sign in PiX4D account first ?

[@harrymantong2910]

i have tried this.. but it is not working with Phantom 4 pro+ V2.. any idea why? and how can i connect ctrl dji/pix4d captur with Phantom 4 pro+ V2?

[@DroneMaverick]

Not sure why. Maybe a factory reset might help?

[@felicityleis6673]

Did this end up working for a Phantom 4 pro+ v2?

[@harrymantong2910]

@@felicityleis6673 still not supported yet..

[@pete6063]

OK I get to Ctrl+DJI then plug in the USB to micro USB with the drone on but I don't get the pop up message to access the USB? Can you suggest anything to help?

[@DroneMaverick]

Plug the USB cable in a second time and see if you get the pop up message. That’s what I did and it popped up.

[@DroneMaverick]

Pete Morgan also remember to close out Pix4D and only open Ctrl+DJI in order to connect the drone to the app.

[@pete6063]

@@DroneMaverick Hey mate thanks for the reply, I have plugged it in many times and still no pop up! Yes I go through the Ctrl+DJI and no pop up and no connection and have Pix4D closed. My controller is model GL300K may be it wont work with this one?

[@DroneMaverick]

Pete Morgan Make sure Pix4D is not running in the background while your in the Ctrl+DJI app, which is the first app you start running. Once connected then hit the green button on the bottom right that says “Open Pix4D”

[@pete6063]

@@DroneMaverick I have tried what you suggested above but still no joy :(

[@davidcrown4109]

Hello, I have tried every step you mentioned including the USB debugging, but still there is no pop-up window in the screen. when I connect the Cable, it only shows notification of USB connected to computer, no POP-UP for the app Choice list. I'm Using DJI Phantom 4 Pro Plus V2.0

[@DroneMaverick]

Maybe wipe the drone clean and start fresh?

[@Kall_sta]

Hey David, my team is also quite desperate to get pix4dcapture onto our P4+ Pro V2. Were you able to fix this at all? Thanks in advance.

[@mrjdphoneboy]

The pop up does not come up on either of my phantom 4 pro V2.0 Plus drones either… Must only work on the original 4 pro rigs. DAMN!

[@MagicBiscuitShow]

@@Kall_sta Have you been able to get LItchi & Pix4D to work on your P4+ Pro V2.0 yet? I've heard that not long ago DJI started putting a "NO rollback" into its firmware updates to prevent 3rd party apps (like Litchi) from working with current and going firmware updates ... AND ... preventing us from rolling back our firmware to an earlier version (that would work with the 3rd party apps)).

[@soulmaster6665]

@@mrjdphoneboy same as you. I don''t get the pop up box. Have you find a way to do it??

[@frankliu889]

Not getting the pop-up in CTRL+DJI. need help! phantom 4 pro +

[@DroneMaverick]

You need a USB cable that can transfer information, not the charging USB cable. Here it is: amzn.to/2Uymgna

[@leymeynardopena9905]

I think this doesn't work on Phantom 4 Pro Plus V2

[@FSFrontier]

I managed to get everything installed and functional. But the apps keep force stopping. Have you had this issue?

[@DroneMaverick]

Yeah I had to re-install until the issue went away. Maybe shut the other apps off might help.

[@FSFrontier]

Awesome. Sounds good. Thank vou very much for the help on this!

[@hirisima7175]

Hello! I installed pix4d but it dont show the map. How can i down load it? Plzzzz help realy need for work.

[@DroneMaverick]

I don't have this drone anymore, but I'm sure you'll figure it out.

[@jasperdillberry4485]

@@DroneMaverick That's the problem I'm having too.

[@felixwolfrum6549]

Unfortunately this isn't working, just because there is no pop up asking me to allow the app access to the USB accessory. Did anyone have the same problem? I'm truly desperate..

[@DroneMaverick]

You need the micro to usb data cable not the charging cable here: amzn.to/2Uymgna

[@cokemax13]

I have the same problem...

[@Kall_sta]

Hey Felix, my team is also quite desperate to get pix4dcapture onto our P4+ Pro V2. Were you able to fix this at all? Thanks in advance.

[@skyspecdroneservicesau5579]

All worked up until the hold for 3 sec. It showed ready to launch but it didn't launch at all. It just came back to the mission

[@skyspecdroneservicesau5579]

OK so further to my above comment. Pix4D will run the default mission. As soon as I edit the mission, eg. make the area bigger, the mission is reported as being uploaded to the drone but the drone will not take off. It will take off if I accept the default mission size

[@skyspecdroneservicesau5579]

Fun to hack but not a viable solution unfortunately- just too buggy. It seems to me, after trying several other similar options that the issue is Ctrl DJI. It simply does not play well withh the controller. A better options iss to get the normal controller and an android device

[@Drone_services]

It seems you have missed a lot of steps and downloads.

[@yassembakoko607]

Hé guy please till saying disconnected

[@jlapaixdejesus104]

The minute 3:22 doesn't work for me...

[@DroneMaverick]

That’s a tricky part. Did you select “Just Once”? That threw me for a loop.

[@DwightDG]

Thank you for this video. I was able to put APKPure on to my GL300K RC (Built in screen), when I go to put Pix4D Capture on it downloads, then I get an error message that it is an empty packet when I go to install. Any suggestions?

[@visualspace4809]

I have the same issue?

[@visualspace4809]

I solved it by downloading it by searching and download the file in the browser