FINALLY Skating The Bump To Bar 1 Month After Finishing It

[@H3RCuL33Z]

Your channel has grown with me, and want to say you may not be crushing it in terms of viral numbers, but you have a legit wholesome community of sick individuals and I think you’re more happy and content with your environment and life in general and it absolutely shows. All that to say keep crushing it in life and I appreciate you.

[@M3WTTH33GO]

seconded

[@markp911]

three'd

[@therealcarlos653]

Foured

[@thenocomplyy]

Fifth

[@gianlucaastengo6743]

Sixthed

[@jameshicks12]

Beard going crazy!

[@backheelpivot]

Hey Garrett I just want you to know how much I enjoy watching your videos, your positive vibe, and just you as a person. It means a lot to see you battling through some of the same struggles I’ve faced in my life. It’s inspiring to see you doing so well and getting better every day. I want to let you know there are a lot of people who look up to you - not just as a great skater but as a person too. I’ve always admired you, whether I saw you on Braille or Andy’s videos. You’re a solid skater, and in my opinion, I enjoy watching you even when you fail and approach things the same way I would, or overcome challenges like I try to. That’s so much more relatable to me than watching someone land everything first try. Much love!

[@Austin-z7s]

FS half cab over the bar, you got it!

[@rivercritter814]

A pole jam would be a cool little side attachment for the other side or center of the box after you get your rail attachment configured and set so you have two options to hit instead of just that one rail attachment

[@Nazoreth]

that back heel was one of the cleanest and most unexpected things ive seen you do on a skateboard in ages. so sick. 10/10. would recommend

[@rose707dmx]

love the videos! you never have to apologize for doing what you love to do or cutting back on things for your own safety or interest. i’d gladly watch anything from skating to you cutting the grass, it’s educational and relaxing enough to enjoy regardless of what you’re doing

[@kevinlabarbera2915]

Santa get this man a shoe rack for Christmas 😂

[@shiftymcfly]

Killed the blunt fakie thanks homie and I'm a throw a hardflip in next time

[@GarrettGinner]

Thanks dude! And got you!

[@AbongileMkololo-q4n]

IT BEEN A LONG WHILE SINCE YOUVE GAVE US A GREAT SUCCESS

[@famousgoldentouch]

Skating the rail into the roll up (@ 19:00) looked really sick 🤘👍

[@tylercooley1932]

Dude, you have no idea how stoked I am to have been able to score one of the first obstacles you put out!! AND it's supposed to be delivered on my 30th birthday! 🤘🏻

[@jarnesegers9556]

A ledge/hubba for this obstacle would be dope too! I was thinking a ledge in the shape of a roll in. Like a short flat part, a roll into the downpart that transitions into another short flat part. I think it'd be really cool to watch you skate that. It's a different kind of obstacle then the once you normally see in skateparks. Would be sick but I know it's a lot of woodwork 😂

[@raydanz544]

Hey Garrett i met you at a skatepark in Aptos back when I was 12 years old I used to watch your videos all the time and you really inspired me to get better at skating and I did and it made my day when I met you back then you probably don’t remember but I just wanna say it’s cool to see that your still skating and making videos after all this time

[@JunkieVomit]

Your content has quickly become my favourite for watching while having lunch or breakfast (or if I catch the video at night; a wee can of lager). The skating/snowboarding were my original draw towards your channel as I used to skate (My old knees and big belly bone have pretty much killed it for me now) but the yaps and fabrication etc are all exactly the kind of stuff I'd usually seek out on youtube anyway so you've pretty much transformed into the perfect channel for me. Even the car stuff, I love watching people tinker with cars n stuff too. Possible future idea for the bump: A ledge/out-ledge? Could attach wee poles through the underside to secure it in place an it also gives you more woodworking funtimes. Could even do something like a ledge to down ledge off the end so you can gap the flat right into the ledge. I've said ledge too many times. You're a ledge.

[@LockinProfits]

Man, you're making me want to go snowboarding so bad now that it's been 4 years . Also, congrats on selling all your fingerboard objects, I need to scoop one soon

[@ChrisPoint-d1s]

I love seeing a notification that Garrett posted gotta keep the bell on Fr 💯

[@natestrickland1204]

Its cool man take your time, no rush on the skating 😉

[@Luigisipala]

Have you thought about doing a removable ramp on the other side of the bump over bar??? You can do also a straight flat bar for it that also goes down with the removable ramp ❤

[@peruperu-jj8zs]

Love your garden knome look

[@troyxhoward]

Yooo 4:16 tripped me out when you were facing the camera to the mirror then it went to a view of you and I was like wait where’s the camera in the reflection of the mirror 😭

[@EvanMeeker429]

Ok, you were talking about shipping out those ramps at the beginning and as someone who works at a ups warehouse I personally look at the fragile stickers but by the time it gets to us there is just so much going on and so much to do you don’t always think of it and accidents do happen that can’t be prevented

[@KemarrGwinn]

I got one for you, bud. I'd love to see a hard flip. Since you're goofy , fs overcrook to fakie on the bar . It might be a new one ?? Thanks for these videos. I love showing them to my boss. You're really doing it out there bro. Keep it up. You're really pushing me to follow some of my skate related dreams since not all of us can make it in the skate world. ❤ you Garrett

[@moyeonkim]

I’m really happy the old videos are back :)))

[@RecklessRussell]

I think it would be super cool to do an up rail going up the bump, keep the straight part of the rail maybe extended up another foot and add in a kink as well to add more variety to your rails! Also might be worth looking into doing heavier weighted base plates for any extended rails off the bump so you don’t come into the issues of the rail rattling too much!

[@Pleeze]

Hey Garret! For the next attachment rail, if you do what you talked about with the extendo rail that also goes down the ramp, one cool idea would be to keep the section you jump over (bear trap section) but make it lower than the rest of the of the rail. So that it still provides stability for the rail, but you don't get caught on it when grinding the extendo rail. Another benefit would be that you could do more difficult tricks over that section if it's lower, and maybe build up confidence to try them over the taller rail :D

[@Ayalatgd]

For the media mod gopro case, make sure you have it set to "raw audio". Try playing around with the different raw audio settings. It makes it easier to edit and you might be able to get it to sound closer to what the regular gopro mic sounds like.

[@GarrettGinner]

I’ll try it out, thank you!

[@ConeLord_]

for the bump to bar You should build a box that extends out for nose and tail slides

[@carlosmorera7237]

Eso loko🤙🏼! saludos desde Costa Rica !🇨🇷

[@sirnyberg5105]

I think you should have a removable kicker on the other side. Makes it a customizable fun box once you start making other rails for it

[@respectanimals2]

Great skating as always , loved the vid , peace ✌️

[@JOESLAP820]

I love you Garrett Ginner

[@fletchertroutman]

like if u are riding up the bump keep a little but of the bar in front dont cut it off fully so u have something to do flip tricks over while u have the new rail with the extension on the left

[@Souls8]

Merry Christmas bro! ✌️

[@DjAmonyz]

i'd love to see a varial heel over the bump/bar, maby make a extendo manny pad/ledge/hubba thing for the bump

[@tylercooley1932]

Btw, beard is looking GREAT!! 🤘🏻

[@trippjones8807]

Also you should make a snake kind of rail for the bump to bar. Like a roller-coaster but horizontal. It'd be funky.

[@GarrettGinner]

That’d be sick!

[@lopwidth7343]

That frontside 180 heel looked sick. Stylish af but also looks much more scary going with your back than front. Also going up a rail i bet is fun. Dan Corrigan(another yt skater) does that all the time in his videos

[@fletchertroutman]

skateboarding is a forever thing bruh u still nice asf way better than the average skater that skates everyday

[@spvidz]

Great vid! Audio sounds absolutely fine to me - if you wanted some control over it you should be able to add some EQ depending on what video editor you use. You could probably just boost the high frequencies a little and cut the low end to get rid of the muddyness. Personally I don’t think it’s a problem based on this vid

[@13cheat]

You need to buy a riding lawnmower that has the vacuum attachment. I have one for my property and it’s really nice to have a way to pick up leaves and pine needles.

[@crustydread]

you should also add a fourth mounting hole so you cant get even more variation with rail design

[@RickshawWreck]

The rail being removable to change out…..genius🎉

[@blakelygustafson]

I do the nose bonk on flat bars all the time, you gotta be precise af but it’s fun! But to do it from a bump is wiiiiiild lol

[@ilya.yarmosh]

It would be awesome if the lower section of the next rail faced the drop side instead of the ramp side. That way, you could create a kink rail setup!

[@teezuschrist2710]

love the content, man that xmas tree is sad lol never mind the location.

[@kevinwolff8539]

The current set up is great for jumping over the rail but an extension with a longer rail on top would be sick for longer grinds.

[@seanmartin913]

Got the beard coming innn

[@YupHowie]

I bet that's an end of summer trick. You for sure got it over that! I knew you could do them flat

[@GarrettGinner]

Gotta learn solid back 3’s first, but I definitely wanna start working my way up to them

[@MadTurt]

Its not more muffled its just picking up more low end, putting an EQ on the audio track and pulling down the low end would probably work well

[@MadTurt]

Most audio producers or mixers do this for vocals all the time because microphones tend to pick up the lows alot more then humans naturally hear

[@user-tb3ih9lt4f]

next video climb up onto the top of the garage, do a 1080 kickflip melon grab into you railing, make sure you land into a dark slide going into the rail, once you get to the end of the rail do a 360 flip into a primo and hold it until you reach the bottom of the hill.

[@BroMorris0341]

Awesome vid my brother! Maybe with the "going out with the homies to skate .." idea, you could think about a mini series where you take 1 day a week out to practice those harder trick requests from the members. Could be awesome content and another perk idea for members only (e.g. you still take our member requests for tricks and then the vid of you attempting/completing them goes to the public.). Could be awesome, as you'd still get to skate and practice (solo or with the homies), it would still be like normal vids where you get to skate, you still get an awesome workout in for the day, conquer some of those doubt demons you have all while promoting membership. Just my little spit ball idea 😃

[@GarrettGinner]

Love it!

[@paradox413]

Totally should’ve gone with my gut and requested varial heel. Awesome video bump to bar is sick.

[@GarrettGinner]

I got you on a v heel next time!

[@TBIKES4130]

Love the beard man im trying to grow mine out

[@Papadopolous94]

Front board to fs blunt down the side of the kicker

[@reid171717]

Flat bar extensions on both side! So out bar and extended over the ramp. Can grin over the whole box from both sides or pop into the ramp or use as an out rail!! Please make it happen!

[@tysonkturbo]

sick back heel!!

[@ryanrowe1975]

Frontside noseblunt on the rail!

[@patrickmoore7503]

You could build another wedge on the other side and then have an up, flat, down rail.

[@ChrisRennie1999]

Make a moveable kicker for the back side of it so you can skate it both ways and kind of like a China gap but still use it how it is now if you want

[@Papadopolous94]

Put angle iron on the side of the kicker ramp

[@JesseMcLanahan]

Ollie “kick out” hippie jump. If that makes sense. Or trick through hippie jump if you’re feeling spicy. Go slow and 50 around the angle. Also my vote goes for the shorter extendo/ down rail.

[@silentry]

i am getting that rollercoaster concrete ledge on monday i CANNOT wait for it!

[@GarrettGinner]

Thank you so much for ordering!! I hope you like it 🙏🏼

[@silentry]

@@GarrettGinner been wanting to buy a finger board obstacle from you for a while glad i was finally able to get one

[@BillSkatez]

BEARD BE FRIKKEN BEARDIN BRO 🔥

[@GarrettGinner]

It do be bearding

[@gregsweet4303]

Man! It would be sick if you made another bump to bar but have it kinked and the lower part of the rail the same height as the box

[@trippjones8807]

Ooooh I'd love to see you hardflip the bar or maybe inward heel over it? Ps need the sweeping content. Need my fix lol

[@GarrettGinner]

Oohhh maybe both!

[@ocdvfx]

I wanna see u make an up rail going up the kicker and never flattening out, just cutting off

[@mikedeems9603]

LOOK AT THAT BEARD DOE!!🎉

[@CrazyCouchSurfer]

braedon hoben with the Impossible over the bar.

[@rywanders]

Return it. Get the action 5 pro lol GoPro has done me dirty too many times, but the audio is decent and content is content as you know and it still works

[@wannicholas698]

Garrett here is your assignment, please pick any tricks with ghetto bird elements to it ( e.g varial heel with back side 180 revert, hardflip back 180, front shove back 180 revert. or even lazerflip back 180 revert)

[@TechnoBacon]

Notice how you said you were gonna leave the beard at least until the end of November and it's about to the the middle of December and it's still here! You're a Beard Brother now 😤😤

[@TrevFlips]

19:16 had me dying😂

[@michaelbrousseau]

The backside heel looked great. Sick dude. Love the content. Only complaint is how you said my name but I’m used to it. Pronounced like brew so. 😂

[@GarrettGinner]

Hahahaha thank you! And yeah I had a feeling I wasn’t saying it right 😂

[@fletchertroutman]

you should come to town park in west oakland if u havent been

[@Whoisskating]

You should do a concrete bank on the side of the driveway going down the hill

[@kristophergurley585]

Nose bonks were big in the late 80s early 90s. Granted scary on a tiny bar like that but man, it would be cool

[@GarrettGinner]

It would be really cool. Terrifying, but cool 😂

[@Messy_Jesse]

You should start making your rails height adjustable.

[@ohboytv]

14:50 i thought you bought a kei truck for a second 😆

[@NorgeSquad]

Have you drilled holes in the rails yet to get water to pass trough Garrett?

[@jonasgeez2140]

Dayum look at that beard ... mountain man.... Your right there is a big difference in the audio with the wind thing on /off

[@Simon-sv9bc]

idea for the extended rail. Make it to a polejam rail?

[@Papadopolous94]

Or any combo of rail to grind/slide the side of the kicker

[@WhatisReal11]

out rail way way more usable then down... extendo that just does down like a down rail at part.

[@NorgeSquad]

Suski grind the bump to bar!

[@gnarson]

The pov was sick. That'll be skate 5 for sure lol fps

[@bigg1541]

Kicklip front blunt 😮‍💨

[@TheOrphanLaboy]

Nollie bs flip would be fire

[@fletchertroutman]

yo garrett @ 18:22 you know u said just the down rail and extendo u shoukd keep like a little section of the rail so u kinda got like something to jump over at the sane time as yo new rail idk if that makes sense but if it does just thought it might be cool

[@fynnleylitchfield8507]

Garret slowly turning into grayson fletcher each video

[@nicksgarage5395]

Front tail pop over!

[@kaleb_davis]

Wanna see a frontside flip!

[@Brian_Jones]

Are any tail bonks on the perpendicular part of the rail possible or too risky for a hangup?

[@artist3095]

Maybe try and make the next rail so the height can be adjusted somehow

[@robinborjesson7145]

Hey, I thought the new camera picked up the sound of your board when you popped a trick in a very satisfying way. Don’t know if I’m tripping but I thought it sounded different

[@hibrido22h]

thx for spanish version!!!

[@Thanxolotl]

Bro you should link up with Bryan arnett and snappy and all those guys

[@funkone92]

Garret turned in to a true mountain man

[@casteliero]

How bout caballerial or half cab flip/heel flip over bar?

[@Dryandice]

You should start a seperate channel for the property work "The Ginner Homestead". That'd be tight.