Find The Height Of A Cylinder When Given The Volume And Radius

[@Geneiveve]

Thank you for not using a calculator. It's been years since I've done long division with decimals and I totally forgot about moving the decimal in the divisors. I also appreciated that you spoke slowly . For those of us who struggle with math it's a great help when it's taught at a slower pace. This was very thorough. Thank you. 🙂

[@lraoasisbottle3052]

Who asked 💀

[@mystoganonblue4857]

@@lraoasisbottle3052 fax bro acting like we asked

[@lraoasisbottle3052]

@@mystoganonblue4857 ikr

[@mystoganonblue4857]

@@lraoasisbottle3052 yea

[@lraoasisbottle3052]

@@mystoganonblue4857 😂

[@sanjuanagonzalez3852]

Math is so confusing to me I never understand anything and i get frusterated and give up😞

[@realone9517]

I feel u 😔

[@beastmodejelly8654]

Giving up is more frustrating...

[@vaderonzerodegreezz4206]

Don’t give up, try again and again until you get it ;)

[@crushoncous5803]

Ohh😢 that's so sad. I wish I could help you. Our grades might be different but I still want to help. But don't give up👍 revise it slowly and ask other people to help you with the hard ones. You can do it. I believe in you💟👍

[@RetroAlex125]

Look slow down the video pause if needed to think stop saying you can't do it everyone has the potential to do it unless they have issues and that's not their fault but u are not born smart you are built to become smart if you actually use your head and clear it and then take the information and understand it

[@JD-tp8zt]

Math test tomorrow wasn’t paying attention in class but this really helped

[@maqxene2599]

Same lul

[@rosie-sv8kf]

Im doing a math test right now at home but i didnt revise so im only now finding out how to do this lmao

[@trinitymerrill8862]

Same

[@Matthew_Atacador]

I live in a French province in Canada and a lot of the Math teachers here are confusing cause it's all in French so this video helped a lot since I'm more Anglophone than Francophone

[@extralikeshotwomen8829]

I have an iphone

[@TheGuy-yk1ut]

extRa Likeshotwomen lolok

[@wcnmvp3820]

Steps of my problem: - 250 ft^3 is the volume - Diameter is 8 ft - Radius is 4 ft I took the formula for volume (V=πR^2) and replaced the V with my given volume, 250 ft. Then I plugged in Pi and the radius, 250=(3.14)x(4)^2h. Then I simplified it to get 250=(3.14)x(16)h and then simplified it once more to get 250=50.24h. I then i divided the volume (250) by 50.24 as well as 50.24h by 50.24, to be left with the variable of h (height). I got the final answer of 4.9761146497 and I simplified that to 4.97 ft. for height. If you wanna be _really_ specific, you can also round up to 5.

[@JohnNjoroge-j9j]

If a cylindrical tin has a radius of 7cm . What is the shortest length of the string that can be wound once round the tin

[@kailahfayee3918]

Thank you so much for publishing this video. You made it very clear and very easy to understand when I had problems hearing it from my teacher. I could not comprehend how to do this when it was coming from my teacher.

[@mrmaisonet]

Glad it helped!

[@NathanGames_YT]

Thanks for saving me in online learning!

[@nightshiin78]

what do i do if I am given the diameter, length, and mass of a cylinder?

[@xpo.1iz]

thank u so much this helped a lot

[@mrmaisonet]

You're welcome!

[@karen_avakinlife]

Thanks so much

[@mrmaisonet]

You're welcome! 👍

[@muridalcars]

Thanks man this helped me I've got exams next week. Shame I've got no revision cards lol

[@thebeautifulgame7405]

What do I do if I’m given the volume but not the height and radius

[@BaraaKholoki]

How can u find the height when only the SA is given?

[@danicakelly4105]

This video helped me a lot because I forgot how to do this while we are in quarantine!! I use Get More Math and I needed to know how to do this. Thank you

[@user-gh1xo6ig2u]

can i ask about. what if the height and radius are not given but the volume si 59.45 sq. m ?? ty

[@jessicaresplandor7280]

Thank you VERRY MUCH!!❤️❤️

[@mayonnaise4671]

I owe my awesome finals grade to you and Brian McLogan

[@mrmaisonet]

Happy to have helped! 😊

[@mayonnaise4671]

:D

[@ziggy1721]

Thanks! you really helped me out.

[@mrmaisonet]

Glad I could help!

[@kevinreznik2672]

Thanks, this will really help me with my test!

[@chupa4554]

Thanks for helping me understand my homework

[@mohammadalhamadi5409]

Thank you so much you helped me with my homework :)

[@mrmaisonet]

You are welcome!

[@torrentz192]

You explained it very well, thank you!

[@didulasayurinda6864]

❤❤ Very clear lesson. Thank you for the clear explanation. ❤❤

[@mrmaisonet]

You're very welcome!

[@elajj-sb7rn]

What should I do when the volume isn't given in my problem ?i am so confused

[@wickeddonlaptop]

your saving me from failing

[@Dolpherino]

why dont you use the units then all of a sudden you put cm unit at the end.... what happens to the cm^3

[@randymolina2413]

Thanks a lot this video really helps me .

[@P-S-R]

What to do if volume is not given

[@TCSOLIT]

that really helped thanks

[@deanopascoe3112]

This was really helpful thank you

[@JustKave]

Thank-You so much sir! I had to find the height with the diametre and the volume, and I did what you did,(but divided the diametre by 2) and it helped a lot! Thank-You!!!

[@dariusd8]

thank you so much that really helped

[@Dill_Pickle1997]

can anyone tell me if this sounds right? I Have a cylinder with a 5cm (2") radius, the cubic centimeters is 147.87 (approx. 5 fluid oz), and the height I got is 1.88 cm, did i do this equation right?

[@salmahbaker8174]

Versipellis the rogue Changeling it's 1.87

[@nahiro-chan6925]

What if the given volume is a fraction?

[@jstekkz]

Why did you substitute it with 3.14

[@anathemma949]

this really helped me!!

[@tr1np_]

Thank you 🙏

[@mrmaisonet]

You’re welcome 😊

[@brandonrooplal7413]

Thanks this helped me so much

[@mrmaisonet]

You are welcome Brandon!

[@zjgamer5250]

is it possible to find the height with only the volume?

[@mrmaisonet]

No, you would need the radius length as well, unless there is a 2nd cylinder in a word problem that you had to set up a system of equations or something like that. But in general, with any equation, you have to know the value of all variables except for one you are solving for.

[@demetriusdemarcusbarthalem332]

How did you get the 3.14?

[@Taga-ibigan]

thats the number of pi

[@logangibson7386]

Thx bro this helped 👍

[@mrmaisonet]

You're welcome! 👍

[@swisslady1274]

You explained it wery good. Now I can do it on my own.🙂

[@mrmaisonet]

Glad I could help!

[@deborahdd423]

im straight now

[@angel1916]

Alexis Michaca I am lesbian now

[@blob109]

i’m gay now

[@haileymarie5947]

But I just need the formula I don’t have time to watch all of this I am in a big rush :(

[@eastonescobedo2241]

it should not take someone that is teaching this subject 6 minuets to solve this, this is why we need calculators, not because we are lazy, but only because it takes 6 minuets if you don't use one

[@Bennuides]

thanks for clearing that up! It's easier with a calculator btw

[@vaderonzerodegreezz4206]

Ayeeee what’s good brother Denny

[@swagbossflora2158]

YOU ARE AWESOME AND I LOVE YOU SO MUCH

[@ronaldlazaro9441]

How to find the dimension of the cylinder

[@jacks5848]

Thanks for your help

[@thedarkbloodintelligence8335]

I noticed a lot of unnecessary work in this video that just confused me but dw mrmaisonet I figured out ur weird way of doing math

[@mumthasfarook8182]

Thanks it really helped

[@alishatariq9021]

This WORKS!!!!!

[@carlboi5652]

What if pu have the surface area not the volume

[@mohammedamirali6401]

If radius is given 25 and volume is given 195 how to findout tha height plzz any one dear 🙄

[@zion_da2]

am so sure if this guy was a teacher his students will comment on other math youtubers videos"my math teacher couldnt teach me this in 2hrs but u did in 6' smh its u ppl that dont pay attention in class

[@Jay19699]

This is going to be great movie. Wow. I am going to see it

[@tinabuaku6198]

Thanks I think it helping me till doing ma work

[@lijishalijisha445]

Thankyouuuu so much

[@mrmaisonet]

You are sooo welcome!

[@siasianjb980]

Ur my hero😊😊

[@apdroidgeek1737]

how to get it without volume

[@davidanywizi7281]

Tap in if ur a class seven learning this

[@ciscosnz_yt9996]

thank you

[@Mariam-dg1mj]

thank you so much

[@mrmaisonet]

You're welcome!

[@simplykelly9084]

Thank you.

[@mrmaisonet]

You're welcome!

[@GracefulBanana]

Thanks but you really stretched the video. Like as far as possible

[@user76296]

thanks

[@mrmaisonet]

You're welcome John!

[@pranksterpigeon]

a math video getting 180,761 views? Is that possible

[@peytonculina6054]

3.14 x 16 = 50.24 take the volume 602.88 and dived 50.24 and that is 12 your height

[@gabrielchilds1134]

Who else is here because of virtual school 😂

[@enoughnonymity]

use a calculator my gosh

[@joemerjoaquin6229]

Msp Glam4evas you're an idiot 2 years ago...hope you're still idiot this year.

[@Goawayppl]

Immor talized calculators existed 2years ago tho.... Oof.

[@joemerjoaquin6229]

worst. he's still an idiot even calculator exist. Oofff

[@UserZenonButShorter]

Your cheating

[@UserZenonButShorter]

What is 11 divided by FOWA?

[@pinkieseitshiro1863]

the method looks simple but maths is not easy😢

[@mrmaisonet]

Hang in there! Math is like a language, it takes many years to learn how to speak it.

[@enoughnonymity]

thank u!

[@zapdosgaming4272]

hey i have a question plz solve it

[@zapdosgaming4272]

if volume is1.54m3 and diameter is 140cm

[@vanshpalpal2666]

3,14 kha sa aya

[@pcarlucci08]

3:57 5:52

[@BayAreaKidd707]

Your math is hard

[@victoryisa59]

use the fricken callculator

[@gaby4842]

YESS I UNDERSTAND

[@mrmaisonet]

Great!

[@ChrisBautista2]

This video didn't need to be that long..

[@asteraceae7123]

salvation

[@zhkarma5491]

Oh yeah yeah

[@rexdelicana6662]

Man this is ez

[@euenchong2441]

easy boiiiiiii

[@zhkarma5491]

Euen Chong oh yeah yeah

[@ಠ_ಠ-ತ9ಪ]

O

[@victoryisa59]

calculator

[@rinakar4912]

wrong process

[@travisbhagwandeen3377]

Rina Kar 🖕

[@wcnmvp3820]

No, his process is right. He might do it in a weird order, not using a calculator and all, but the process is correct.

[@cosmichronicle]

Well I am pretty sure he did better you

[@RenyBob]

easy dislike

[@sledplayz9285]

Thanks

[@LK_35]

Thanks

[@nasirabdi7448]

Thanks

[@chinnietahko5712]

thanks