Finishing the trailer parking area, driving a New Holland & fishing the MF harrow out of the hedge.

[@carlosjones5304]

Great video again. I really love that old 290. Looks like that harrow will need a lot of work. 😢

[@FlyingFergyMan]

Thanks Carlos, yes will need a fair bit of work on the dics, we will see if its worth it.😀

[@eamondempsey3018]

Love the way the big rocks jumped into the digger bucket by them selves...

[@FlyingFergyMan]

The power of editing Eamon.😂😂

[@philipmcnabb7312]

Great video once again 👍 Don’t go to the blue side though 😢 My dads the same when he loads up the dumper, you’ve to stand up to see over the load. Flat out off course 😂 Sheds coming on well, be nice job when it’s finished. Keep them coming 👍

[@FlyingFergyMan]

Thanks Philip. No not going to the blue side, that just a neighbours..although was a nice little tractor to be fair.😊

[@TO-sp6do]

Love the videos keep them coming please I look forward to watching them every Sunday

[@FlyingFergyMan]

Thanks 🙏 👍

[@paulthompson8467]

Good video nice to see your shed progressing you will be glad to see it finished nice NH but the 290 is still my favourite on your channel 👍

[@FlyingFergyMan]

Thanks Paul. Will be good to get shed finished. That will be the 290s new home.😊

[@garymadden2656]

Great video 💪👌

[@FlyingFergyMan]

Thanks Gary👍

[@philipjmcloughlin5880]

Good video shed looks to be coming together 👍

[@FlyingFergyMan]

Thanks Philip, getting there with the shed, soon be done.

[@beyondnow1600]

Could you scrap the Harrow if the scrap value helped towards a second hand one, if there's anywhere nearby that sells them ? Great video as always 👍

[@FlyingFergyMan]

Thanks. I’d probably keep it for spares 😊

[@shutterspeedireland1148]

gd job

[@FlyingFergyMan]

Cheers boss👍

[@garysizer2268]

That disc harrow would end up like triggers broom if you fix it 😁

[@FlyingFergyMan]

Yes Gary. It’s going to need a lot of work to get sorted. Not sure it worth it.

[@jamesjohnston1007]

Another good one 👍 👌

[@FlyingFergyMan]

Thanks James.

[@stephennesbitt8337]

Excellent video as always, think those disks would suit your 1200 nicely, surely you can get another set for parts and make one good one from the 2.. wonder does the disks use wooden bearings similar to my Ferguson set of disks! Best of luck with them.

[@FlyingFergyMan]

Thanks Stephen, they have metal bearings I think the older ones had wooden ones.

[@MasseyDave]

Coming on !👍 still a tad wet tho !

[@FlyingFergyMan]

Getting there Dave, slow progress but progress😁

[@MJBrennan-k9d]

well done man another great video. matt ireland.

[@FlyingFergyMan]

Thanks Matt.👍

[@Gearoid35]

Good video Cathal you are getting there, if you could roof the trailer parking area it would be a great job

[@FlyingFergyMan]

Thanks Gearoid. We thought of putting a lean to, to the trailer would defo help keep the rain off stuff.

[@AgrimotiveFarmMachinery]

Just amazing the way you made those rocks hop into the mini digger bucket by themselves, Cathal !! 😂

[@FlyingFergyMan]

Magic rocks Alan. The great benefit of editing.😂😂

[@AgrimotiveFarmMachinery]

@@FlyingFergyMan Where would we be without it ?.🤣

[@keithburke8577]

Surely you have an engineering shop close by with a lathe. Those shafts are relatively slow rotating so could easily be built back up with weld and re turned to suit your new bearings

[@FlyingFergyMan]

Hi Keith we do, its just a matter of cost and whether its cheaper to buy a decent second hand one and keep that one for spares.

[@keithburke8577]

@FlyingFergyMan I get ya lad. Handy bit of kit and if ya can do it for a reasonable cost then do it, be as good as new and suit the 1200 for work/shows

[@JACK11168]

Great video my opinion the disc is gone to far to fix i would try find another one and use that for parts mabey

[@FlyingFergyMan]

I think you might be right Jack.😞😞

[@corrigansrestorationvideos9403]

A 135 wouldnt lift that 🤣

[@calumanderson5617]

I love the term "None Massey", 😁 compared to the thing I drive, (I better not mention what I call it other than Cowfarmerdan knows very well !) especially those incompetent Vegan mechanics with a tractor that did 413 Hrs that took 6 visits in 6 months and 1 they didn't fix at 1500 Hrs and still billed my neighbour £2000 for looking at his phone in his works van, a Deere bill for nothing fixed yet !!. I'm glad I'm a Massey fan,😊 as for the disc's, difficult decision ? 🤔 thank for the video always.🙂👍

[@FlyingFergyMan]

Thanks Calum, yes I think the old discs may have had it. I think I know the tractor you are talking about with Dan... does it have a loader??😗😗

[@calumanderson5617]

Ohhh yes....🙄🦌💩

[@nickhill3362]

I wouldn't bother with them worn-out disc as I think they are to small anyway for the 1200 I managed to buy a very nice set of Gregoire Besson XRL year 1995 for £1600 that will be a good match for my 1250 at a working day event and hopefully entertain me and a few spectators 😁

[@FlyingFergyMan]

Thanks Nick you probably right about the disc harrow.

[@nickhill3362]

@@FlyingFergyMan I don't know that I'm right it's your tractor and your disc so do what makes you happy mate I looked at a few worn out cheap sets and priced the parts it didn't add up financialy and they were worth very little when done .luckily I found my set that are ideal as they fold up so safe on the road and easy to transport just like towing a trailer they have plenty of life left in them and definitely have a good resale value although there keepers 👍 I will email you a picture

[@FlyingFergyMan]

@@nickhill3362that’s it exactly Nick, it’s about cost and feasibility . We don’t do tillage on our farm so the dics be just for show. Jury is still out on them😂

[@FlyingFergyMan]

Would love to see a few pics of your 1250 and harrow👍

[@nickhill3362]

@@FlyingFergyMan what's your email I will send you some in now 👍

[@glynrogers1018]

Hi what is history of the bigger digger regards

[@FlyingFergyMan]

Hi Glyn. Big digger is an EX60 been in the farm about 10 or 12 years. Serious handy digger for only 6tonne.

[@petergardner2334]

but if you fix the disc up you no its done right

[@FlyingFergyMan]

True Peter just a matter of is it worth it.😊

[@barrymallon9373]

If it's not red keep it in the shed!!!!!

[@FlyingFergyMan]

Could not put it better myself Barry.😊😊

[@78mikehayes]

What kind of starter is in that dumper? 9.8m/s^2

[@FlyingFergyMan]

A bad one Mike😁

[@78mikehayes]

@@FlyingFergyMan I thought you might appreciate my engineering joke

[@FlyingFergyMan]

@@78mikehayes gravity Mike.😂