HOW TO MAKE A TREE SWING

HOW TO MAKE A TREE SWING - SIZWHEEL

Рет қаралды 248,836

Күн бұрын

Пікірлер: 54

@FINNISHLUMBERJACK 9 ай бұрын

Many people want to buy the same gear I use in my videos. Now, I have an affiliate agreement with Husqvarna, and it is possible. Just follow this link: www.kqzyfj.com/click-101142111-15598737 ⛑ HELMET: Forest helmet, Technical 🦺 JACKET: Husqvarna high vis forest jacket, Technical Extreme 👖 TROUSERS: Husqvarna chainsaw trousers, Technical Extreme Arborist 👖 TROUSERS: Husqvarna chainsaw trousers, Technical Robust 🪚 CHAINSAW: Husqvarna 550 XP G Mark II 🪚 CHAINSAW: Husqvarna 560 XP G Mark II

@robertlivingston1634 11 ай бұрын

I really couldn't see what was accomplished

@certifiedhoarder 11 ай бұрын

Not much

@jamesbeeman8192 10 ай бұрын

Just set proper hinge.

@thecurrentmoment 8 ай бұрын

He made it fall a bit more to the left, instead of going directly straight in line with his first scarf cut

@timothysullivan4130 3 ай бұрын

It helps the tree twist a little

@nbutter2779 2 ай бұрын

Yes we ask see it test slightly to the left but when would you do this?

@lukelizotte2813 Жыл бұрын

Could you stick a felling wedge in the face cut on the opposite side you want the tree to swing to to accomplish the same result?

@albertovigna2733 Жыл бұрын

Con un albero dritto come quello quale differenza pratica e' stata ottenuta? Se si cerca una rotazione della parte alta dell' albero e' sufficente ritardare il taglio per ottenere la cerniera di uno dei due lati. Siccome sono un praticante agli inizi avrei bisogno di una spiegazione....grazie e buonnlavoro

@ttboy675 27 күн бұрын

WHAT?????

@peterkroneberg5456 Жыл бұрын

Awesome! Priceless! Thank you Lumberjack for sharing. I'll definitly use this trick and already have some situations in mind...yeehaa! Greetings from climbing arborist in Switzerland, Peter

@FINNISHLUMBERJACK Жыл бұрын

Awesome Peter from Switzerland! Nice to hear from you

@Inal123-jg7tj 9 ай бұрын

mantap skil dewa salam supitr lur👍

@FINNISHLUMBERJACK 9 ай бұрын

🙋🏼‍♂️

@markkuvuori4300 Жыл бұрын

Jopas on Jounilla systeemit. Pidetään tämä mielessä, hyvältä näytti.

@ttboy675 27 күн бұрын

HUH?????

@michaelnolan2206 Жыл бұрын

Fail to see what was achieved here with this complication of a cut. The tree could of been made to deviate far more with easier methods. Or i have missed something here. Obviously you know what your doing,but what was the goal here ?

@FINNISHLUMBERJACK Жыл бұрын

Just to show how the trunk behaves when cut like this

@stevesmith2171 8 ай бұрын

I watched my father do this on a tree that was bare limbed on one side and he wanted to turn it so he could fell it in the direction he wanted and limb it easier. Doesn't seem like 50 years ago.

@andrejshamin1452 Жыл бұрын

Этот метод я видел в инструкции к пиле Хускварна😎но результат хорош👍

@MrZimpauttaja Жыл бұрын

Russians are agressive criminals as seen in occupied Ukraine.

@сергейкузин-ъ6к Жыл бұрын

О каком результате речь? оно упало ровно.не перевернувшись.так что тут провал .смысл этого способа-провернуть дерево.например,что ветки легли в другую сторону.

@andrejshamin1452 Жыл бұрын

@@сергейкузин-ъ6к зачем поворачивать, главное положить дерево ровно и безопасно. Понтами Буратино красен

@МихаилМаркин-т3м 5 ай бұрын

@@andrejshamin1452 а тут как раз понты. Смысл дополнительного запила?

@andrejshamin1452 5 ай бұрын

@@МихаилМаркин-т3м пишите в Хускварну, там объяснят)

@certifiedhoarder 11 ай бұрын

The swing dutchman requires a mismatched humbolt undercut so that theres a pad of wood on the compression side that holds the tree up and prevents it from going toward its lean once the kerf closes. I have a vid explaining the dynamics here. kzbin.info/www/bejne/aoqvi6Jppcujbs0

@user-kt7hw2fi5k 3 ай бұрын

Keep practicing. Humboldt. Face cut to the Heartwood.

@DarthTwilight 2 ай бұрын

Oh.. okay... I see where we're at. This looks like experimentation.

@Maniacalchopshop Жыл бұрын

Didn’t really make the tree swing though.

@Firedog-ny3cq Жыл бұрын

If you make your sizwheel cut following the same angle as your face cut, you are cutting into the vertical wood fibers that make the sizwheel effective. A better method is to make a vertical plunge cut where the angles of your face cut meet and then make the small angle cut from the horizontal plane of your face cut to complete the angle cut of the sizwheel. That way you have the maximum amount of vertical holding wood to ensure a successful sizwheel tree drop. Also, if you are finished cutting your back cut, get the hell out of there. Don't stand next to the tree waiting to see what will happen next. You could have cut more out of your back cut and the tree would have fallen immediately. Please clean up debris around the base of the tree you are cutting. I have seen other videos of yours where there are also branches on the ground covering your possible escape route. I'm beginning to think you are posting these incomplete videos just to try and sell $40.00 T-shirts. Tighten up your ship. People's lives are at stake here.

@ravenflight88 Жыл бұрын

calm down Nancy no one died or got hurt no property destroyed, and incase you didn't notice he's not in pansyland safe space murika 😂😂 it's a youtube video NOT a training film, it's a guy showing how HE does things, nobody's life is at stake 😂😂 unless you're dumb enough to go doing a job you weren't trained for. hey but big box stores gotta sell chainsaws so idiots can attempt to save a few pennies for beer and netflix😂😂😂

@integr8er66 Жыл бұрын

I tend to agree, this tree really didn't "wheel" at all, it just fell the direction of the face cut as if the wedge wasn't made at all

@andrecostermans7109 Жыл бұрын

Yep, don't follow the angle of your face cut when making the sizwheel cut, just go straight vertical into 1/2 of the diameter and about1/2 of the diameter (thrunk) in depth also. Sometimes I even make a second vertical (plunge) cut at where I will end my back cut, to make sure that side of the wood won't rip to fast and acts more as a spring before it snaps.

@scottage0147 8 ай бұрын

I really didn't see it swing at all

@Josephlell Жыл бұрын

They're tricky enough without doing that

@saltymofo5870 2 ай бұрын

I guess that’s how they do it in Finland, don’t let anyone in the USA catch you doing that or you will be laughed at vigorously 😂

@RC-Heli835 5 ай бұрын

Man them saws are screaming

@FINNISHLUMBERJACK 5 ай бұрын

🫨

@Josephlell Жыл бұрын

Now you going to get a barber chair

@vladimirondrasik9926 Жыл бұрын

A toto je zas načo dobré ?

@ttboy675 27 күн бұрын

WHAT?????

@Josephlell Жыл бұрын

Well hell I thought you was going to do something

@Josephlell Жыл бұрын

Why would you want a treat to swizzle

@jamescannon5286 22 күн бұрын

I didn't C tree swing either

@calvincantwell5445 5 ай бұрын

Someone needs more practice.

@donmoore7785 3 ай бұрын

Yeah unfortunately, the viewer can't tell what is accomplished, and details such as the shape of the wedge (triangular instead of rectangular) are omitted. A lost opportunity to be a useful video on the subject.