First 5 mods you SHOULD do to your DSM!!

[@is.joseee6101]

Mine was 1. Pull engine 2. Send to machine shop 3. Full seal 4. 1000 hp capable

[@Undefeated.ZX10]

how much was it

[@erniefarris6248]

Dude im doing the same thing just bought a 2g a month ago and im pulling the motor to go full build 1000+ and then full send 😂😂

[@24kNick]

@@erniefarris6248 either you have a lot of knowledge on the platform or u have a lot of money to burn

[@mxlman26]

@@24kNick so ISNT worth it as investment. I was going to buy one but ive seen very Bad rep on this little pretty cars. Just wanted one cause ive saw one when was teenager overunning us

[@jaysfishandwhips1328]

@@mxlman26 car doesn't have bad rep the owners do.

[@marcellus6959]

Good advice on your video My first mods were: 1. Maintenance/Rebuild. 2. Upgraded rotors/brakes/lines/fluid. 3. Upgraded Wheel and Tire combo. 4. Coilover suspension. 5. And my 5th mod all at once was: intake, exhaust, manual boost controller. Next I'll be turning my attention to the fuel side with an upgraded fuel pump fuel pump rewire hi flow fuel pressure regulator upgraded injectors then I'll be going the ignition route performance plug wires, plugs, coils and bigger alternator. Then turbo, intercooler, yada yada yada

[@vic_gst7579]

Michael Gomes that’s a good way to go about it, tackling one section at a time instead of being all over the place

[@cgc6723]

Mine was 1. Rebuild engine/trans 2. Clean n Repaint engine bay 3. Maintenance 4. New wheels/tires On my 92' 4G63T Talon

[@darronthomas79]

That’s a good list. Dsmlink is a must. First mods I did was intake, downpipe, catback exhaust, bov and lowered it.

[@refineme]

I’ve owned 2 dsms in the past about 20 years ago. I’m looking for another one, from bone stock other than general maintenance you need to do, the first 5 are a must for me: 1: IC piping to replace restrictive stock ones 2: metal BOV that will hold boost 3: boost controller 4: gauges, at least a boost gauge. 5: 2.5 inch cat back

[@73kenright]

Very nice presentation! You appear quite comfortable in front of the camera! I approve of your choice of gauges; AEM has some great gauges that show REAL data! And please go for BC, Megan products are not of the same caliber as your DSM, or anything else for that matter. Even if you’re on a budget, just wait and save before going with Megan. No one should EVER cheap out on the suspension; same with braking system.

[@anthonyhales4192]

Owned serveral dsms since I was 15 years old. Now 34 and just picked up a mint 96 gst Spyder for an unheard of price. My last DSM was a 98' Spyder fully built by myself with a precision 6262 on it and everything you could think of. In my experience with my 98 on a stock engine a heavy clutch caused the car to crank walk and that's where the build began .with this car ( 120k) my goals will be every bolt on possible with the stock turbo. Something you would have seen in the early 2000s. Not looking to make 350hp just see what I can squeeze out of the stock t25. I have an intake coming , just did t belt water pump cam seals and thermostat. I'm going to remove the restrictor pill from the stock boost solenoid for a couple more pounds of boost and Install a boost gauge. To me the air fuel ratio gauge isn't necessary untill you get a fuel system and up the boost past 16 psi. The stock fuel maps on these cars are so conservative there's room for a little more boost . Clutch and trans are in great shape just changed trans fluid and that's all I'm gonna do. Like I said just a little more umph to it maybe 15 25 HP. Been down that road of building one and it was fun and very fast. To the tune of 15 thousand dollars. More into keeping it stock ish with a few tricks up my sleeve. Good video .

[@anthonyhales4192]

The car also has a thermal R and D catback and an Evo 8 bov.

[@asphaltcowboy7868]

Mine was 1. Emissions Delete 2. Aem Cold Air Intake 3. Steel headers, catless down pipe, 3 inch catback exhaust 4. Coilovers, struts, tie rods, end links, 5. O2 wideband a/f ratio gauge 6. Bramo breaks, braided steel brake lines, slotted and drilled rotors 7. Tires and wheels 8. Front and back, lower and upper strut bars 9. Short throw shifter 10. Stage 2 clutch 11. Lsd 12. Garrett Turbo, wastegate Bov, walbash fp, adjustable fuel pressure, steel braided fuel lines, 375cc fuel injectors, e85 set up 13. Evo Ecu Flash/ Tune

[@dakota3872]

one of the beat front ends ever for jdm!

[@dsmmike95]

1. Maintenance 2. Big 16g turbo 3. Front mount 4. Turbo back exhaust 5. Manual boost controller and boost gauge. That was my 1st five 12 years ago.

[@NisusGG]

this spot you filmed is dope

[@lamNoJedi]

Hey a fellow CTer! I'm over in Danbury. I did everything at once. Maintenance 1st followed by over 10k in part lol.

[@vic_gst7579]

That’s awesome maybe I’ll see ya around at a car show or meet! And I definitely know the feeling lol never sparing a dime on a quality part

[@mxlman26]

Wtf 10k?

[@lamNoJedi]

@@mxlman26 oh for sure. T28 turbo, ets intercooler, custom intercooler piping , tien coilovers , wildwood big brake kit, dsmlink, hks muffler, custom 3in exhaust, aem boost, a/f, temp gauges, mishimoto -x radiator , deatchwerks 550cc injectors, aem fuel pressure regular, BMW alpine white paint job, new headlights, Evo 8 wheels , special carbon front lip, kick panels, fog covers, windshield cover, caronetics rear diffuser, corbeau seats.... This is just off the top of my head. I'm sure I'm missing stuff.

[@JustYohannes]

Loved this video brother! I have a very 98 gst convert to GSX love it so much. where do you live? we should connect I am about to start a channel about cars to.

[@vic_gst7579]

Afric Network nice! I definitely plan on going Awd in the future as well. I’m from CT 🇺🇸 & you should definitely start a car channel, one of the best things I’ve done ✅

[@JustYohannes]

@@vic_gst7579 I have fam there I'm going to dm you on ig

[@djack2058]

Need help. I'm new to the car world and trying figure out stuff the old fashion way. My 1998 gst turbo been given me problems. There is a line right under the oil filter that if you change the oil, the people could easily alter it and mess it up. I need help figuring out what the line is for so I can figure out if I have a blown headhasket or if it's the line that they tweaked during the oil change. The research I've found is that the line is either for oil or for coolant. Go figure the issue I have is milky coolant when I check under the radiator cap to pour coolant in. My engine light came on right after they changed the oil so that's why I'm suspicious as to what the problem is. I also cant check the engine code bc my obd2 port doesnt connect. I even got the fuse and everything.

[@nickturlukis9017]

Dude I have full meagan suspension kit for my dsm and I love it

[@Hosteggy]

Mine was 1. Fix intake leaks - Rebuild throttlbe body - RTV sealant 2. Install FP exhaust manifold 3. Rebuild 14b Turbo 4. Fuck the 14b turbo 5. Install 16g turbo 6. WIN

[@265308]

5 Mods for 2G's (1995-1999)(for mostly OEM stock setup ): 1. replace the shitty plastic blow off valve. 2. replace air filter with cold air intake setup. 3. Have the 60k timing belt service done n get the crank angle sensor replaced while ur getting that done.(use Distilled water with the coolant mixture) 4. Upgrade the Struts(KYB is my personal choice) 5. Get basic gauge setups. 5 Mods for 1G's (1989-1994) Mostly stock OEM setup) 1.Replace the BOV for louder recirculating one(stock one too quiet IMO) 2. Upgrade the air filter setup or make some holes on the stock one) 3. Put a 2g Throttle elbow & 2g exhaust manifold(the 1g are prone to crack) 4. Have the 60k timing belt service done n use Distilled water with the coolant mixture) 5. Get basic gauge setups.

[@24kNick]

Someone correct if I’m wrong but doesn’t aem make a gauge that has some sort of fail safe .

[@jinsc9596]

Mine was: 1. Make it drivable (picked it up for $700.. in rough shape) 2. Brakes and Suspension 3. Pull the 4G64 motor and trans and swap in a GS-T drivetrain (Did I mention it was a Spyder GS?) 4. Bigger Injectors, Front Mount, Evo III 16g 5. Remote tune (Blackbox.. I'm too cheap to buy Link..)

[@anubisdsm1551]

Just came across this video man!!! Great work

[@vic_gst7579]

Thank you!

[@dylanh9281]

Car looks clean👌

[@vic_gst7579]

Thank you bro 💪🏽

[@nazimelon6653]

I just got mine, however am sitting in germany, theres pretty little support here so im trying to figure out where to go for mods, partsand whatnot. I do have the whole issue with TÜV, bodykits and stuff like that is already a huge hassle, id like to make some nice panel-led taillights, again doesnt work. Brakes nees replacement soon anyways so might as well upgrade them, no idea where to go. Its a GS, a GST or GSX conversion is happening at some point, thats gonna be a little tho. Any ideas where to go?

[@10xyourlife65]

Mine was Engine and transmission rebuild 16g Intercooler Fuel injectors and pump Boost controller

[@davidnguyen4143]

I rebuilt the engine and replaced the entire front end suspension. Cost me 2500 on parts only. I did all the labour

[@patrickmorada790]

Mine was 1. Maintenance 2. Intake 3. Full exhaust 4. MBC 5. Aluminum radiator (cuz the stock one broke)

[@Tjtalon]

Go with Fortune coilovers because you can upgrade it to air suspension anytime you get the money.

[@xandreicabiso6930]

Thanks for sharing your video brother keep vlogging

[@kareemraider2844]

I have a automatic eclipse 1999 rs wonder if I can modify it i got this from a old man that was sitting in his garage 100000 miles on it

[@kendrickcollier973]

Mine was dsmlink coilovers injectors exhaust intake

[@PapaSmurf918Detail]

Hit the nail on the head man. MAINTENANCE FIRST!!!! I did all fluids,engine oil, trans, diff, t case... then t belt water pump and the works all OEM. Then Ecmlink v3 and wired direct to ECU for logging abilities. Don't forget if your running v2 dsmlink and they were the original installers you can send it back to them for the v3 upgrade along with your cable for half the cost👍👍. 1. Maintenance 2.ECMLINK v3 full 3.wideband air fuel ratio sensor and gauge. 4. Clutch 5. Start power mods.. 🤘 fuel pump, injectors, upgraded turbo, ect... Check out my GSX on my channel if you want bro. Take it easy!🤙🤙🤙

[@vic_gst7579]

PapaSmurf918 Nice write up! 👍🏽 a lot of people always forget to do maintenance ,but have to remember these cars are 20+ years old and require more attention to detail and maintenance before you can reach your power goals, but appreciate the comment & I also subscribed to your channel 👍🏽😁

[@PapaSmurf918Detail]

@@vic_gst7579 🤙🤙🤙 exactly... maintenance is KEY to a reliable build. Thanks bro!! Appreciate that. Been in the dsm game since 2005 lol. Subd back👍👍

[@teddiazjr.6223]

Good list

[@vic_gst7579]

Thanks !

[@scottiusnevious5143]

Well we had a dodge avenger that looks similar to the old eclipes. Its been sitting for years, last known running and has no motor mounts but the motor is still in the car. Its an automatic 420a. Mice infest it now.

[@Emazzi]

Can u put dsm link on a 420a

[@CK-jd1kf]

Mine were: 1. new brakes 2. new drive belt 3. new tires 4. new door and fender, since I crashed it on the back of the tow truck when driving out of the tire shop. :(

[@coolcars922]

Lock actuator doesn’t work know where I can find one? Can’t find any eclipses in junkyard

[@evol.sal8990]

Tein Coilovers are very nice

[@acmll2890]

what kinda wheels are those they look sick

[@owenosborne4878]

Yo I'm in CT too. I got a 97 talon. Nice vid man!

[@vic_gst7579]

z oid nice man maybe I’ll see you around! 👋🏽

[@BeastModeXCIII]

bro! I'm from CT too! need someone to get me into the game lol

[@chrisabbott7657]

I've heard a lot of dsm guys like Feal coils

[@ethanglinsky2211]

Lol I liked the video but I bought an automatic talon esi so I really can’t use anything lol but the car was 800 bucks

[@donovanstrieby3699]

So question. I'm going rebuild my automatic 97 gst. What would u recommend on doing for that such as rebuild... injectors,turbo,intercooler,blowoff valve,intake... etc.

[@vic_gst7579]

Donovan Strieby all depends on two things: how much money you are willing to spend and your overall goals for the car.

[@265308]

Simple....sell it n get a manual. lol

[@noahsmith9136]

Hey bud get a shift kit online cheap have a shop install it a 16g or 20g turbo setup including injectors and good intercooler and a good tire setup up front that thing would be a monster the autos in these are crazy with shift kits and bigger turbos

[@fernando_713]

@@265308 Standards and Automatics both have their pros and cons. It's really up to personal preference.

[@liveresin9000]

Lmao mine was. Crower 241 cams. Long tube headers. Msd 2 step. Crower springs and paint

[@jesselyons6730]

All those belts aye lol

[@ruirodrigues4997]

I think u should put brake upgrade somewhere in the list.. Great vid bro!

[@vic_gst7579]

Rui Rodrigues I definitely agree! 🙌🏽

[@ruirodrigues4997]

@@vic_gst7579 i bought yesterday rear and front 3000gt calipers, i think its will be a nice upgrade. About the coilovers, since in my country (Portugal) they are very illegal, i will buy koni sport shock absorbers and eibach spring.

[@nuteven7156]

So what idk what year I should get any one have tips for me ?? I'm thinking about getting a gt from 2003 but I'm not sure

[@brandonjeffries2128]

you should've mentioned the eprom and how the 98-99's did have one ):

[@corvette72778]

The first mod for any turbo car should be improved cooling....upgraded radiator!

[@noelpileta6409]

Mine was 1 coilovers 2 Aluminum radiator 3 Rims 4 head gasket Evo struts and timing belt 5 Clutch stage 3 whit fidanza flywheel 6 t case all mouth engine Rear differential ... And rear differential axles and front and rear bushings diferencial support Front bumper to 98 cause mine is 95 gsx And headlights ... Damn i don't even know how much money I trout away 😜 And still my car is no running 🤣 wtffff ....

[@darknautic3645]

Fortune auto man love em on my 97 Tsi

[@vic_gst7579]

Dark Nautic thanks for the recommendation 💪🏽

[@darknautic3645]

You interested in leather seats for your ride? I have grey leather front seats passenger 9/10 driver 8/10 rear seat 10/10 if your interested, oem leather factory. No seat included just the leather.

[@predatxr7624]

Bro where did you find the beat at the end? lol

[@projecteclipse1]

FEAL Suspension are the best coilovers you can get for the 2G DSM platform, I have them on my 95 Talon and their great!!!!....$1700 later

[@vic_gst7579]

projecteclipse1 yeah idk about $1700 😱 I’m thinking more around $1000

[@projecteclipse1]

@@vic_gst7579 well I also Autocross mine so the need for top notch struts and shocks was a must for me. I've read Koni is the next best brand follow by Megan for are platforms. But jus like you say in your "top 5 mods to do" maintenance is key, research is your best friend, knowledge=power. DSM for life!!!

[@vic_gst7579]

projecteclipse1 definitely agree! 🙌🏽

[@Hosteggy]

BC or D2 for sure. I'm sure you already bought some though lol.

[@nicktunesnemesisperformanceINC]

Maintenance is not a MOD and it’s ECMLINK people sound crazy saying it wrong!!!

[@BeastModeXCIII]

broooo! I just that you're also from CT! Please help me!

[@vic_gst7579]

Hahah What’s up??

[@wes89]

I always detune every car I buy.

[@ssgtjoker8603]

Maintenance, DSMLINK, intercooler/bov, Full turbo back exhaust, brakes

[@jaimegarcia7994]

3 de 3 de