First Cut with the NEJE Master 2S Laser

[@JohnColgan.]

Neat piece of kit. Bonus having the wireless connectivity, sets it apart from any others.

[@PawPawsWorkShop]

Yes, it is nice. The android phones actually have more capability. The Ipad is somewhat limited but it does what I need.

[@JohnColgan.]

@@PawPawsWorkShopSimilar subject, I found an Android GRBL controller recently, that works with Bluetooth or USB "OTG" cable adaptor. Not as good as PC control, much better than Fox/Genmitsu little remote controller boxes. The CNC world is getting there !!

[@housspin1]

Hi. Paw Paw very cool video I like the NEJE, I own one, the NEJE Master 2s Plus. I think the one you referring on this video is the Master 2S. If I'm not wrong the 2s is 170mmx170mm and the Master 2s Plus is 255mmx420mm. They do exactly the same the only thing is the size. Thank you for sharing your wonderful video and experience.

[@neaglestyles9305]

this one is plus

[@neaglestyles9305]

i I think you are right, because I ran to their store just now to see that this is 2s, not plus. Sorry about that

[@housspin1]

@@neaglestyles9305 all good, no Problem i own the 2s Plus and i know for fact this one is smaller then mine

[@PawPawsWorkShop]

Thank you

[@rockman49er]

Yes I have the 2s plus and mine is bigger than this one

[@redherring5532]

Just tuned in, leaving a comment before I forget 😎

[@PawPawsWorkShop]

Thank you

[@terrymurphy4177]

Looks like a promising product, I like it😎

[@PawPawsWorkShop]

Thanks

[@brigette3004]

Hey paw paw. That is so cool. Man I have toy envy.

[@PawPawsWorkShop]

Thank you 🤗

[@jabbarhajiyev3052]

what would you recommend to buy for a small business? laser milling machine(yohuie) or laser engraving machine ortur ?

[@theyorkshirelad.]

I have this laser but not setup yet can you cut through thin wood with them if so can you do a small vid please a how to thanks

[@dave3301]

interesting, thanks for sharing

[@PawPawsWorkShop]

Thanks for watching!

[@butcher196623]

I have a question that's very important to me. In this video when doing the engraving did you have the camera sped up or was that real time? The reason I ask is I have just got the Neje 2s Plus and I am confused because mine is much slower.

[@PawPawsWorkShop]

This was real time. I rarely speed up my videos

[@raymondedelen7022]

Very good

[@PawPawsWorkShop]

Thanks

[@blakewillemsen9925]

Thanks for sharing Paw Paw. Quick question- Have you tried any cutting with this machine. Curious how it might have performed.

[@PawPawsWorkShop]

No I have not yet. It should cut 3mm plywood with air assist fairly easily. I’ll be trying this shortly

[@astrid6148]

Hello, can it engrave stainless steel pendant?? Hoping for your reply:))

[@PawPawsWorkShop]

A diode laser may be able to mark the metal but not etch it

[@jabbarhajiyev3052]

Neje is has diod or co2?

[@PawPawsWorkShop]

This is a 40 watt diode laser. That means the output is about 5.5 watts

[@jabbarhajiyev3052]

@@PawPawsWorkShop Feungsake has 30 watt and outsput is 8 watt

[@jabbarhajiyev3052]

@@PawPawsWorkShop I think it's better to choose feungsake. it is also more powerful (8 w vs. 5.5) and in addition there are milling cutters

[@PawPawsWorkShop]

I’ll look into it. Thanks

[@vadikarden]

Спасибо за обзор. Скажите, он работать с программа CorelDraw ?

[@AdolfKriz]

Net

[@ohske]

😯👍👍👍👌

[@PawPawsWorkShop]

Thank you

[@Cantstandbs]

Hey Paw Paw, I like your videos. Even the wifes sits down for your vids, that says a lot. Anyway, I want to let the community know that, a lot of the videos show the NEJE diode lasers and modules. Since I know you are watched a lot, I wanted to make people aware of NEJE and their products. Unless you are a content provider or influencer on KZbin you will not get their attention. I asked how to warranty a module that lost all usable power and was told , you didn't buy it from our store. But I did. Then a video was required, I am not a tuber. I watch you. well anyway if you are asked about NEJE (don't lose your reputation) You may want to decline on answering the inquiry. Neje is flooding KZbin with Videos, Great marketing but not so great a product. Looking forward to more of your content.

[@PawPawsWorkShop]

So far, their product has preformed as expected. All diode laser have a lifespan. When they burnout they need to be replaced. At full power you will get about 1000 hours. That seems like a lot but it goes quicker than you think. If you can reduce the power it will extend the life. I appreciate your comments and I hope everyone will read your message.

[@Cantstandbs]

I guess, I should have stated that the module in question only has five hours on it. I am a retired Engineer, I get the whole hours used issue. The Company did not want to deal with me and keep delaying, by sending emails with more requirements each time. A respectable company would outline exactly what you are required to produce for evidence. The fact I made a video showing it at work/not working should have been all that was necessary. Well I am glad that you are having a good experience but you also promote on your page. Nothing wrong with that. I just wanted you and others to know that the treatment you get is not what I got. I do thank you for replying. at least someone out there is listening. Even if I didn't change your mind. Thanks and have a great day.

[@PawPawsWorkShop]

Thank you very much for your comments. I will contact the company with regard to their customer service issues. If enough people read your comments and if people will contact the company hopefully we can make an impact. Again, thank you

[@PawPawsWorkShop]

I contacted them and stated the problem. Here is their response Thanks for your feedback, we are value the suggestion from customers. We are proud of our customer service and provide the whole engraving machine is guaranteed free for 2 years (engraving module-2 years and 20,000 hours warranty), 24 hours shipment of vulnerable parts worldwide, give customers without worries to purchase. If any questions or complains about instruction or more, please feel free to contact our professional NEJE customer service team: [e-mail]. I told them to be expected you to contact them to get the problem resolved

[@Cantstandbs]

@@PawPawsWorkShop Thanks for stepping up. I really did not expect that. I will try once again to reach out to NEJE. I will let you know how it goes. I got that feeling from your videos' that you are a stand up guy. Thanks for taking the time.

[@jamesbevan9989]

Looked through videos didn't see picture, guess it didn't work?

[@joemartinez5673]

How did the pic of your grandson turn out?

[@PawPawsWorkShop]

Awesome