FIRST DRIVE after build. SHAKE DOWN begins! ((TRUCK RESCUE))

[@TheChris147]

This guy could post a 3 hour video of him counting the rocks outside his house and I’d watch it twice! Love the content keep it up man

[@Mazda.Fit.]

I’ve already got the popcorn

[@DjSubstain]

Well, If that's your project. I guess you could finish that, sittin on your ass.

[@kalbcorp]

☝️ #Truth .. Here to watch a legacy being built

[@dibcrew6879]

Jesus I can already see the counting rocks dance and song

[@gunhole7059]

There not rocks there Datsun's

[@nitcat1]

Your upholsterer nailed the interior, perfect!

[@edh7676]

Been sitting here refreshing youtube waiting to see some Puddin

[@johnparker6642]

Wow, that's all I'm going to say to that!

[@dentech4710]

Don’t stop working on the box trucks until you have everything dialed up to your liking. Love your videos.

[@davidschafer544]

Warmed the gears knowing he's gonna build the sum-day in this shop. That's a right on move.

[@mlynch001]

That “brush” in the vent hose was a “flame trap”. Prevents a backfire from getting into the crankcase.

[@marshmower]

Never knew. I threw mine away.

[@kneedeepinit]

I love watching people finish projects. Keep going until they are done

[@Vault57]

Thank you 22:35 for pointing out the reality of project work. It is really frustrating to watch some tool on a reality show do everything perfectly the first time. Most those guys probably pull the parts from the box, yack about it, then hand it over to the intern. Then they come back from their trailer and talk about how simple it was to install!

[@osifielDoperAtive]

HIlarous content… Thank You for helping me laugh and reset. My days are filled with stuff no one likes to deal with. Your hour long episodes take my mind away from frustration and depression. Never good! Until I get to have supper and enjoy Puddin’s adventures. Appreciate what you do. Thank You… 👍

[@dontblameme6328]

Ditto!

[@ScubaShafer]

Facts

[@TheGeekiestGuy]

Looks like another good one. Thanks Puddin. 🤙🏾 I hope everybody's having a good one. This is a damn good community.

[@jeremybuchan8060]

Hi Puddin', I wanted to say Thank you to yourself and Mortske for making the content you guys do. I've learned so much from watching the both of you and all your endeavors I was able to troubleshoot and fix my nieces 1965 Ford Falcon Fuel sending issue this weekend. Turns out it was the fuel sending unit ground connection, but without all the troubleshooting steps I've learned from the both of you I would have never touched the car to begin with. Again from the bottom of my heart, thank you! You guys ROCK!! (PS. I thanked Mortske also)

[@kennyjohnson8371]

Not sure you will see his since the video has been as long as it has but I pretty much binge watched the old Datsun series. Great content

[@averagemyke2843]

Sucks about the wheels but sounds like thar problem is gonna get worked out. Good video dude, don't worry bout it. Most the people here enjoy just gettin hang out in the shop with you. Do what you gotta do, don't sweat it if you don't think it was enough

[@bucketosudz]

That ol Ford is a camper special edition, they had additional springs and such added from the factory. Another fine video Puddin' thank ya!

[@wolfparty4234]

Pud!! You don’t have to have a 100% type of content for a video to keep all us happy watching your videos. I appreciate all your efforts and input’s with all of your Pott county wisdom and entertainment!!! ❤️ya, Mr.Puddin!💪🏼👍🏻🙏🏻❤️🤣

[@yakuba01]

🎉🎉Thanks for watching you have been selected among the winner's for today contact me right now to claim *your* prize ☝☝*

[@tombrenes2411]

Attention Done Headed Down Yonder. Another sticker or patch idea Love the Evil scissors Great build awesome content

[@garysacry5969]

I enjoy everything you do! Get after it, bro!!

[@todd_halfacre]

holy crap that interior came our amazin'

[@clintbrooks5749]

Not even a mini truck guy or a box truck guy but you do you, I love it very good content. Keep up the good work. From a 2T3 AF mech.

[@darrenswails]

Puddin makes me want to find an old mini truck U-Haul

[@DocSprocket]

Samurai is a solid donor choice. You get a divorced two speed transfer case, and two leaf-sprung live axles. Do it to it!

[@jeffakacrowntownbrewing]

Hey there buddy! You should document the home build process on the second channel. I’m sure most of us subscribers would love to watch the progress and process. And home builds are big for bringing in new subs.

[@That70sChannel]

Smashed that like as soon as I got the notification and there were already 59 people who had already done that. Channel's agrowin' Much success, Puddin. You're earnin' it.

[@larryalexander4833]

Puddin congratulations on getting started on your new home.! I will suggest go look at some different floor plans and think about it ( don't get in a hurry!!!). No one gets it exactly right building thier first home ( the way they think they want it that is) . And biggest thing I can recommend is make sure they get the foundation and drainage correct !!!!

[@matthewcraven3197]

If the the breather is just a breather and not a pcv valve. Just run to the bottom of your air filter base. Great content buddy!!

[@stumpy2816]

That little truck looks great. Love the interior 👍👍

[@LarryJohnson7]

Yup puddin and Monday’s are a fixture here. My wife is not into cars like I am but she watches for the entertainment value. Thanks for the content sir. Here in Ontario Canada we love it.

[@christianmcpheeters8638]

All steel wheels have some wobble, just in the nature of how they're assembled. I came to that conclusion when I was a tire guy for 3 years, figured out pretty quick it was just how they get made (center gets welded to the hoop, room for error and warping happens too) because every damn steelie that came through had a wobble on the balancer. Love the videos, keep them coming!!! Excited for that someday model A, but I'll never bitch about a box truck or a will it run either, you're just as entertaining regardless of the task at hand.

[@HFG]

I wish I had amnesia so I could watch these over and over and over!! Yee Yee!!!

[@majorwoody1az1]

Alll the pain puddin puts up with never fails to provide entertainment 🤘🏻❤️

[@garrysgarage1958]

The little brush thing as you call it … it for anti backfire .. keeps it from traveling thru the hose .. FYI 😂

[@6cloak9]

Working on older rigs, trying to get them working 100% ain't easy but a dedication, no capp you've given us the motivation to keep going! My 83' 720 4X4 gave it life to keep on going! Such an inspiration to keep going at her!

[@tomlangley6236]

Box Trucks....Model A....Full Size....square Bodies.....Hell its all good! Keep em coming!

[@toddhansen5072]

Need a pcv valve if you want to hook the crankcase hose to manifold vacuum…love the channel!

[@rootnpearl]

Puddin you are correct about progress. Because sometimes you have to go in reverse so you can put it in drive.

[@AverageJoeBuilds]

The model a is unreal. That's a piece of artwork and I cannot wait to see what you do, huge motivation from your channel to try and do something with my own 💪

[@houdiniairsoft157]

Love seeing the process of all the little details getting dialed in. Good stuff, enjoying your channel a lot!

[@chrisv6008]

Hope all goes well with your new house build One thing I do know is new house construction never goes as smooth as you want it to

[@tjakr3869]

Appreciate the videos and time you all put into your videos and business. Take care.

[@stanleysteemr1316]

Always a Joy watching you work, Puddin'. Unique projects different from ordinary builds are Fun to see. I learned to drive on dirt roads at age 12 (1970) in a Datsun pickup.

[@robertwilliams8010]

Love the little Dat-Sun King👍. Another goodin from the Puddin 👍👍👍👍👍👍👍👍👍👍

[@Troutelectric4492]

Man I love this little truck. This one is my favorite. The half haw will be my second favorite, especially after it's 4x4. I'm a 4x4 guy for sure. But that said I really can appreciate all your projects. Very nice Puddin.

[@hankhessig6586]

Went down that rabbit hole with crown vic wheels in the past .... brand new wheels checked on a balancing machine .... they all had some wobble ... yet worked fine on a daily driver.

[@edryan2926]

Another great video Puddin. It shows that things don't always go perfect and there's always some troubleshooting to be done. Top Stitch Taylor sure did a great job on that interior! Keep up the great content, and it's good to see you feeling better this week.

[@oldpolak5203]

Puddin that interior looks very nice , way nice !

[@Ryanfantana]

46:15 it should be routed into the outside of the air cleaner housing, which you don’t have. By venting directly into the intake it’s dirty crank air not mixed with fuel. But you figured it out, keep up the great videos, truck looks awesome.

[@poaolopalmitessa2152]

I don't gives a damn I like what you do. Thanks for the knowledge and the laughs.

[@christophersutton2315]

Looks good and runs great. You will get the little stuff fixed. You make awesome videos.

[@Toxocara995]

People are complaining about too many box truck videos, but personally, I really love watching you fabricate things. If you're slicin' and dicin' and stacking dimes I'm happy to watch.

[@yakuba01]

👆Thanks for watching and Commenting send a direct message right away we l've got something Special for you🎁

[@mnichols31]

Sometimes life is just like that, what can ya say. Always enjoying the content, Puddin ! 👍🏻

[@tim1299]

My uncle taught me that the lot you build your house on should drop off to the back - never to the front. You can have a walk-out basement - easy to store lawn mowers , patio with a small second kitchen for entertaining. etc.

[@stubbysgarage]

Pretty sure that F100 probably had a slide in camper for part of it's life. Secure it to the hooks on the side of the bed, the extra springs to support the load and sway bar to help with it being top heavy. And that would explain why the bed floors solid since it would've kept leaves and stuff out

[@jefffindley5870]

So you think those 5/16 inch diameter mild steel hooks screwed to the SHEETMETAL bed sides kept a 1000 + pound camper in the bed ? My parents 1979 had a bracket that bolted into the stake pockets ar the corners and used heavy turnbuckles . Made it to Alaska and back . If you are correct, I wouldn't want to be anywhere near that disaster looking for an occurrence location.

[@stubbysgarage]

@@jefffindley5870 you never know what somebody decided to make in there backyard

[@Brianshrader6357]

I Love that truck.The part of it being a part of your past is awesome.Now it's part of your future.Who else on UTUBE can say that.No one else I know of.

[@kurtludwig6962]

I like your channel content and your humorous banter, but I love old cars done traditionally or street Rodded Can’t wait!

[@CihaPet]

DAMN! The interior on the Dat-Sun King Delivery is top notch!

[@hallvarguttormsen3655]

Love the box trucks, keep the box truck content comming!

[@Tealmoney8571]

Im not tired of the box trucks. They are so cool and something you just don't see! Keep it up!!

[@666tokarev]

Sami axles will be fine bud!Super excited to see your spin on 4x4 suspension!!!!

[@TheKustomBeardoh]

Love me some Datsun King Delivery! Can’t wait to see what you do with that someday model a.

[@karlcollier8017]

You're datsun bring back great memories thanks for saving them Karl

[@shixson957]

That new interior is sharp

[@maryshasteen9897]

My family loves your channel. You don't try to hide anything you show mistakes and all

[@victorrobinson9116]

Check with the rim shop in town to see if they can be straightened within 1/8 of an inch and that will be acceptable you never know unless you ask.

[@russell5790]

One of THE best channels on you tube, I just can't work out why you are not already on a million + subs mate.

[@cliffordkinnear9705]

Funny as always and true about going three steps forward and two back! Puddin's keeping it real! Interior and bench seat look great!!

[@beardedscrapper538]

This is my favorite box truck out of the fleet. I especially love the interior.

[@jdllewellyn5802]

For the pcv line, run it to a fitting in the exhaust. 45 degree angle works great, makes a venturi. I also like to add a slit with a cut off wheel about 1/2" from the end too. Creates a vacuum to draw crankcase vapors, and prevent any pressure, keeps it out of the intake, and burns it off nicely. :)

[@joe5404]

Makes perfect sense. I love watching you do you. Keep it up.

[@victorrobinson9116]

Check the spark plugs make sure the Gap is spot on if not close them just a hair

[@richardharvey8939]

Love puddins work .

[@ktmcc4360]

Interior is beautiful. Looks extremely factory, love the plaid accent doors. That hot beige carpet is dead on for the way they came! Get a 521? Please!!!! I e got pics from the 80s in mine.

[@faktefoe1547]

Go for the suzuki vitara, amazing little offroader

[@ericwilkinson9447]

Pilates.. never did any Pilates before although I have done a lot of pull-outies🤣

[@shartne]

I think the half haul was runninng perfect until it sucked up some dirt or water from the new tank you put on it. Happened right after the new tank install. Just clean the float bowl and squit it out with some spary cleaner and some air and put it back together with a couple of new filters right after the gas tank. I really think the gas tank you put on it had some shiitake mushrooms in it. If there is one thing I know for sure is always use a new gas tank if you dont want trouble. You could wash out the tank then use some RED KOTE tank seal on that tank. It will be good as new after that. First put a can of Heet in the tank to make sure it was not just water the can of Heet will get rid of the water.

[@keyhook4039]

that blue and tan is pretty fire looks good

[@raywilson800]

GROOVY❤🐘🇺🇸Your doin cuz. I'm still blown away by that ride. Good luck with your home building project.❤🐘🇺🇸

[@stomper2582]

Good to see I’m not the only one that has a bad day now and then. Also that my hands have a mind of their own sometimes. 😁

[@albertdehn8381]

Thanks for sharing 👍😀

[@kalbcorp]

I always try to make a point to comment and interact on these videos .. I imagine my engagement helping to get that house built on the dream property 💗 You deserve it Poody Tang 💪

[@johnlenoir1023]

That truck is looking very nice that interior turned out beautiful thank you for showing the real truth about a project I don't think I've ever seen anybody finish one and it just be boom done right off the bat there's always some tweaking and redoing to be done thank you

[@yakuba01]

👆Thanks for watching and Commenting send a direct message right away we l've got something Special for you🎁

[@SchysCraftCo.]

Puddin she’s looking really good in that Puddin shop blue. Top stitch kicked out that inside. Looks awesome . Can’t wait to see more videos soon Puddin. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.

[@PuddinsFabShop]

Thanks Jared and I appreciate ya watching all the videos recently! 👊🏻

[@kennyphillips8603]

Glad to see your home is finally in "near" future. One step at a time my friend.

[@waynemitchell9186]

I live in England so stay up and wait for new videos. Much love to puddin and family. ❤❤

[@rebeccacole4608]

Great video!!! Darn wheels though…that’s cray cray 😂 Love seeing you & the wife together ❤ ❤❤

[@cjplol6589]

Head stuck in wheel well, brilliant, Goober. Lol

[@hYd420]

Yesss pudddin. finishes on the Datsun king. Soon to be someday model a build , new shop and heck yesssss a NEW HOUSE BUILD oh puddin I love how well your doing man. You deserve it so much buddy I love you guys. Good luck man ! Can’t wait to see it all. ❤

[@bc65925]

There was a car dealer in Rockville In. that had a wheel straightener. It was like a hydraulic jack press (only with a jack on top and bottom) with a turn table to mount the wheel on and a small feeler to detect the high or low spots.

[@F14Goose37]

I just have my PCV hoses open under my hood. I have a filter on them, but I don't have a place to put them. The truck runs great. I also know all the Ratsun guys say to run your truck at 12 degrees btdc with the Weber, but that is just a base tune. Mine runs better at 14. Tune it with a good vacuum gauge and figure out where you get the best vacuum.

[@Saul8]

Wish there was a slow replay of throwing the tool at the truck made me laugh hahah

[@sheldonbenson4510]

Another great puddin fab shop video,and its monday night I always look forward to your great videos and watching the master builder build a master piece

[@gravedigger8]

perfect truck for the channel

[@DanG4n6guy]

Wow wow wow what a great playlist. I have watched every minute of this build and learnt something in every video. I don’t know if I will ever have the courage to do a build like this but I have enjoyed watching this build. Thanks for posting. I think it turned out great!

[@Anthony-vm1jc]

Those door panels would do my head in every time I opened the door 😂 one the opposite pattern to the other 👍🛠✌️

[@MrGunPilot]

So rescue that Jeepster sitting next to Slick's F100!!!! There's your 4WD setup, ready made. And that 225 Dauntless engine would be killer in a project.

[@johnnymack8442]

Thee ol' Datsun king is looking like a real king!! 2 sweet.

[@mrstudiodaddy]

11:13 Puddin' I need this on a shirt!

[@yakuba01]

*Thanks for watching you have been selected among the winner's for today contact me right now to claim *your* prize ☝☝☝☝*

[@augiezehner6059]

Sounds like she’s about to have a whole lot more followers on TikTok! I’m one of them.

[@funjunkiegarage]

Awesome episode. Thanks for showing Slicks Ford in detail. I love checking out old vehicles.

[@yakuba01]

🎉🎉Thanks for watching you have been selected among the winner's for today contact me right now to claim *your* prize ☝☝*

[@pugliesesspeedshop]

Interior is beautiful!! Absolutely love the C10 steering wheel, nice touch!!

[@kevin.prickett.9563]

Hay the sticker on the Timing light is just slapped on the degree wheel willy nelly at the factory had a friend figured it out on one someone tossed out 🤣 Take the sticker off and zero it out then reaply the sticker in the proper alignment.👍

[@nopartsgarage6691]

That's how it goes around here to. 2 steps forward and 3steps hack. Ur gettin it done tho.