First Look: Kuat Pivot v2 Swingaway Hitch Mount

[@TheChungKids]

I have the Kuat Pivot V2. It's great quality. However, on their website it does mention to never use with a vertical or hanging bike rack for safety reasons. 😮

[@oldshovel]

Awesome setup. I like the combo.

[@glock19gen3]

Nice. Throw some bikes on there. Curious how well it works when its loaded.

[@MrSnoop1987]

I have the Kuat bike rack and I got say this swing out is a upgrade trying to get in the back off my 4runner with bikes loaded is a pain nice swing out I will be upgrading to this soon.

[@jackbteaching]

Nice video! Just bought one to install on our RoadTrek camper van.

[@drmoynihan]

I have a 3/4 ton 4x4 Dodge Ram (diesel). I pull a camp trailer and put a hitch receiver on the front, and then I put bikes up there on a rack. However, the rack is fine for the older bikes, but it knocks them together. I wonder what it would look like if I put your bike rack up front. Lately I have been putting the bikes inside our camp trailer and this does not make my wife happy!!! I can also put one bike inside the canopy for short trips, but this is a hassle. Anyway, this is a great review. It has given me a number of things to think about. Particularly for short trips when I have a number of bikes (Grandchildren) to take. Thank you for posting this.

[@hardtailparty]

They make up to a 7 bike carrier. It's great for family trips. I think it'd be tough to see past if it was on your front bumper

[@dennismiller1602]

Hey this add-on retains full access to my truck bed ....my interest in purchasing a velocirax just went up considerably!

[@NerdsonDirtMTB]

Super glad I found this, waiting for my 3 bike version and the Piviot

[@hardtailparty]

The pivot didn't hold up, i don't recommend it in this config.

[@NerdsonDirtMTB]

@@hardtailparty Oh really! what ended up happening with it?

[@valoriant]

could you cut the difference off of the rack and then drill two new holes for the pin?

[@HaltonOutdoors]

Love it! Want to get one for my Kuat NV 2.0 3-bike rack. Also love your Miata!

[@forestkan459]

Question! How stable is it when driving? That is my one main concern. Just bought a velocirax and it does shake a bit when driving down a bumpy paved road even with the rubber bands on the brake lever mod. Funny, I have an 07 Tundra with a 3/1” lift similar to yours it looks like and we are running into the same issue with this rack. Hard to camp with it but otherwise we love being able to lug so many bikes.

[@nwlady1844]

Is it difficult to open or close the pivot lock? I've heard it can be hard for ladies if even a couple of bikes loaded on. thank you

[@michelleb6332]

Thank you for the video. I have a 2020 Sprinter and just bought a Kuat Base bike rack + 2 add-on. I'm deciding between purchasing the Kuat Pivot v2 swing arm or the RakAttach swing arm. On the whole, the Kuat Pivot v2 has solid reviews from people who just got it. However, there are also several complaint/reviews indicating that the Pivot v2 broke after being used a few times. Some comments out there indicate that the RakAttach is just a more solidly built product. The RakAttach weighs 43lbs and can carry a max load capacity of 275lbs, vs the Kuat which weighs 39lbs with a max load capacity of 250lbs. Any experience with the RakAttach or thoughts?

[@hardtailparty]

See my comments section of this video. My pivot broke.

[@redrover9988]

Nice swing out. Good video.

[@annpereira1597]

I have the Pivot 2 with the Kuat 4 bike rack and found there is a ton of flex to the setup once the rack is loaded to the point that I worry the bikes are going to scrape the pavement when going over bumps. Even contacted Kuat about this issue. Wondering what your experience has been with this setup loaded with 6 bikes on the Velocirax. Thinking of switching racks.

[@hardtailparty]

My kuat pivot has bit the dust. It fell apart.

[@MrAndresih]

@@hardtailparty bummer 👎 just picked one up and did a 1000 miles with one bike shaking all over the place. Back to the drawing board I suppose.

[@rd8029]

@@hardtailparty What happened with yours? I have a 2 bike 1up rack on a Kuat Pivot v2 and I've noticed some flex after putting 2500 miles on it.

[@cwitt483]

What happened to your Kuat v2? I might buy one and would like to know what "fell apart"?​@@hardtailparty

[@ADVENTUREAROUNDTHEBEND]

I am looking for a swing out but not sure the Kuat will work. I have the 6 bike Velocirax and EMTB’s. Do you know which swingout could handle that load? Will you stay with Kuat or do you have another in mind now?

[@hardtailparty]

It won't handle the weight of your setup

[@EpicRev1]

Steve- Just received my Velocirax 4 bike rack. I just sent an email to Bryce indicating I has having an issue with the anti wobble feature. The V wedge only wants to move to the side, not upward when I side the unit into the hitch. Off the hitch I can get the wedge to move equally side and up if I manipulate the wedge as I tighten. Did you guys have any issues with this feature?

[@hardtailparty]

No, we don't have this issue. Are you using yours with a pivot v2, or straight into your hitch? Their design expands the wedge both vertically and horizontally. They'll walk you through the troubleshooting if something is weird.

[@EpicRev1]

@@hardtailparty The wedge is on the corner and should move in both directions, up and out as you tighten. I talked with Bryce and I think I figured out the issue. Off the hitch the wedge would only move out, but if put pressure on the side of the wedge, just enough to get the wedge to move upward it then would supply equal pressure top and side. Installed the rack back into the hitch and applied press from the side, it seem to work.... Your experience scared me to put the Velocirax on the Kuat. It's the V rack is now on the Ford Expedition. My 4 rack weights close to 85lbs. How many bikes did you have on the rack when the Kuat failed? According to Kuat the Pivot V2 should handle 4 bikes.

[@jgerard7136]

Does your rack bounce forward and back (rocking) when on uneven roads? I use this with a North Shore four bike rack and the rack bounces quite a lot when the truck hits a dip in the road and the bike rack gets unweighted for a moment. Any suggestions to correct this?

[@hardtailparty]

Yes, the kuat makes it bounce a bit. It's not as stiff as I'd like.

[@WiseOneSun]

I like that drawer system in your truck! I've got a suburban- any input you give is greatly appreciated on where I can get such a drawer system. Oh the bike rack is nice too! LOL

[@hardtailparty]

Decked. It's amazing and worth every penny.

[@WiseOneSun]

@@hardtailparty Kool thanks! Reading more comments on this video I noticed you said you're swinging kuat swing broke. So do you still recommend this one or a different brand?

[@rachel7550]

I read in the comments that this broke. Did you buy another swing away hitch after and if so which one? It’s so hard to pick one online 😅

[@hardtailparty]

Yes I did, but that one broke too. Vertical racks destroy swing outs apparently.

[@rachel7550]

@@hardtailparty dang… I just want something for a vertiyak kayak holder and 60 lbs worth of kayaks. Not sure if that’s too heavy. What is your current setup?

[@hardtailparty]

@@rachel7550 I made a video of my current setup with rigd

[@rachel7550]

@@hardtailparty ok yea I watched that video, wasn’t sure if you meant that was the one that broke or not. I kind of want the rigd but not sure how much of a pain in the butt it would be to have to open it to access the back doors of my sprinter van every time. Do you think it’d be a hassle/would you get it if you had a sprinter?

[@recreationventuring]

This could be the perfect solution so that I don't have to climb over or take off my bike rack when traveling in the Truck Camper.

[@Monkey_slapping_keys]

You could cut down the rack assuming you don't plan to sell it on, it looks like box section? Possibly enquire with the manufacturer or speak to a fabricator.

[@hardtailparty]

Unfortunately there's no easy way to do that wittuloit destroying the expanding wedge inside that keeps it snug.

[@nunyobizkneez]

couldnt you just lower the velocirax into the "bike rack" mode and then open the tailgate all the way?

[@hardtailparty]

If you've got 5 bikes on there, it means your bikes are upside down with the seats and bars on the ground. Not ideal when I just need to get into the tailgate area. If the rack is unloaded, it's a lot easier, but it's still a hassle.

[@manleynelson9419]

Could you all give us an update on how that's been working for you because I'm worried about the warning from kuat not to do what you're doing. Maybe it's working for you I'd like to know

[@hardtailparty]

See the comments below This broke on me.

[@slofax1251]

How does it swing with bikes on it?

[@hardtailparty]

I'll do a full review of it soon with bikes on it.

[@EpicRev1]

Steve - I have the same Kuat Pivot V2 rack on my Ford Transit HD350. I'm looking at the Velocirax 4 bike rack. A couple of questions. One is fit, current I use a Thule XT Pro with no issues for the Swing out doors. Looking at the measurements with the door open (90%) the tire fenders holding the front tire would hit. My thought was the but the rack in the "Lean" position I say you do in the "unboxing" video. I was told by Lolo Racks that the Kuat V2 was way to "flimsy" for the Lolo. I rather order the Velcoirax just worried about Kuat handing the load. My tongue weight is 700 lbs on the Ford and the Kuat can handle 250 lbs. Any thoughts, how has the setup worked for you guys?

[@hardtailparty]

I need to do a follow up review. The just hasn't been as sturdy as I had hoped. The velocirax is super sturdy. My kuat actually broke from a load of 220 lbs. I would rate the limit closer to 180-200. That said, the convenience was really nice before it broke.

[@EpicRev1]

@@hardtailparty Can I assume the Kuat failed with extended? I'm looking at 3 or 4 rack, I would say 99% of the 3 bikes is it. Bryce at Velocirax sent me an email message indicating the Kuat swing arm will add more bounce to the overall setup. FYI Lolo Racks is almost ready to launch their swing rack and according Lolo it can handle the load and will be much more stable than the KV2 swing arm.

[@EpicRev1]

@@hardtailparty The receiver part of the Kuat is open, allowing the hitch bar to slide further in. Moving the V Rack closer to the truck (6-8") would reduce load fatigue. A design upgrade to the V Rack would be to add 1-2 extra holes along the hitch bar to give the unit added flexibility

[@hardtailparty]

@@EpicRev1 that is correct, provided the extra holes didn't interfere with the hitch tightening mechanism

[@jasonkennethshonwise3850]

Hey love the videos man...I love my hardtails too!!! Lol ttyl take care 😁👍🤙

[@phoenixeasyrider6026]

Is this a demo or did you buy it? Never saw anything like when I purchased my Kuat bike rack.

[@hardtailparty]

Kuat sent it to us to review on the channel. It's available to purchase.

[@ThePedro8-25-78]

Those bed drawers are nice lookin!what brand are they,and do you like em??

[@hardtailparty]

Decked. I LOVE them.

[@Mellyfz]

if you look back a bit, he's got a great vid of the install. Awesome bit of kit!

[@Victr87]

Nice Miata!!

[@xanderzumwalt917]

that's a sweet rack dude! i could use one of those

[@swooshjj]

and in europe we are stuck to that 50 mm ball

[@christophweber5688]

Is there a snake in front of the wall?

[@hardtailparty]

Nope, it's a bike lock. Looks like a snake though, and we do get a lot of them here.

[@lifeofdan1265]

Make a video on the Miata!

[@hardtailparty]

the miata was featured in the triple H video.

[@thecount1001]

you didn't test it with bikes on? that would have been valuable.

[@hardtailparty]

As i said in the cideo, stay tuned for a review. I need some time using it before I can review it

[@manuelcobian2355]

👍😀💯