First Test Drive! 500cc Off-Road Go Kart

[@GrindHardPlumbingCo]

Get the Kove Audio Solitude Noise Canceling Headphones for OVER 65% off this month: koveaudio.com/gh68 Code: GH68 (discount subject to change)

[@eriknulty6392]

IT'S A BIT OF WORK BUT I KNOW HOW TO FIX ALL OF THE I-BEAM'S, CONTROL ARMS, ETC. FROM GETTING BENT. it is really simple you need to build BOXED A-arms, i-beams, control arms. thats how i roll on my prerunner. when i had tube arms they would get bent in one hard landing. i promise once you do it, you will not need to re-do again. heavy but strong. let me know if you have any questions or want photos for reference material.

[@ryanwilliams8338]

Get a subaru wrx body

[@aidenhopkins4421]

A turbo u say 😂😂😂

[@aidenhopkins4421]

Nahhhh😂 a know u says it 😂😂

[@aksummit9072]

How much does one of those gocarts cost completed?

[@Taylordrifts]

It's always interesting seeing other people fab up something creative. I also examine the problem and try to think of how I would do it, then seeing what you come up with I'm always like dang, that's a way better way to do it. lol But I guess I'm not looking at it in person so who knows I would probably think the same about some of my fab stuff if I watched it one a video. Great work as always, see you guys at SEMA!

[@royhillson4993]

So humble, love it

[@davoupnya3202]

I heard it, "A Turbo Camaro" ! Hell Yeah !!!

[@isaakwelch3451]

They tried a turbo on the mustang. The camaro needs a smog pump supercharger!

[@comethiburs2326]

this thing's way too fast already. wouldn't run a turbo 500 in an open body offroader... especially not with less than 4ft between the axles. that's asking for death.

[@nutwiss]

For the shifters, have you heard of, or thought of a system similar to BMX gyro brakes? They would allow the wheel to turn 360+ degrees, if required. They're designed to allow bowden cables to operate around a pivot without binding.

[@StuTubed]

Even without the gyro, cables on each side would be better, and negate the need for cutting the dash since they can be routed.

[@jessepitt]

Yeah I vote for simple cables or hydraulic. The rod seems like it will be changing lengths and riding the gears at locks.

[@mattharrell4]

Came here to post this. I was thinking this was exactly what they were going to do and was shocked when he overlooked this because these guys are awesome and know their stuff!

[@ThomasGillot]

I was thinking the same thing. BMX brake gyro design seems like it would work.

[@samueldiaz5964]

I was thinking they could surround the thing that connects the steering wheel to the car and just put column shifters

[@DanteYewToob]

I just wanted to let you guys know you officially inspired me! I got a 2 stroke bike engine for my nephew, a 4 stroke for myself, and a 4 stroke for my moms old busted trike! Our plan is to build a few motorized bikes and customize them all and make use of the nice cold weather here in FL! We always wanted to make something cool and I decided to just go for it! You guys gave me the inspiration to just say screw it and try something cool! Worst case scenario I spend time with my mom and nephew and we build a pile of junk and have some funny memories, best case we have an awesome bike scooter gang! Keep up the awesome work and keep inspiring people like me to go for it, and grind hard for what we want.

[@MrArcticPOWER]

I've been on youtube for 10 years and I usually don't comment just to give a compliment. I'll do an exception for you guys because I've never been so excited to watch a video. I swear every new upload it's like Christmas. The builds, the fab work, the music, the edit, every single thing is on point.

[@kong3]

You guys are great. My Dad used to make us Go-carts mostly out of rebar in the early 60's. Used 6vlt starter motor with a 12v batt. Later he was one of the first people to make "dune buggys" by cutting up a car shortening it etc. 1st one was a 50 Ford with a flathead v8. He would have applauded your style.

[@mrpotatomanbob8790]

For your next power wheels project, get a Dodge Ram and put a Diesel engine in it.

[@adamfase7430]

Yes ^^^^^

[@michaelrurak7056]

Hell yes that would be epic

[@ryanconran824]

Heck yeah!!!

[@99milesaway41]

Dude. Hell yes.

[@isaakwelch3451]

Power Wagon!

[@CodBadonde]

The slow-mo welds 😍 2:29

[@nickeycole8953]

Love the slow motion of the weld sparks from 2:30-2:43🤩

[@sethriggle1462]

8:15 I was already thinking about that since you started to try the rods. I was like ehhh how's he gonna do that and steer 🤣🤣

[@antares-the-one]

It is possible, that it would be some accidental gear shift offs when he turns

[@KalLanPIDT]

I would have made a stationary pipe around the steering axel to mount the shift stuff on and made wider paddles

[@sequichie92]

I was just yelling “weld a bearing to the steering column so you don’t snap your rod!” 😂

[@jonathansmith5511]

Sickest beats, time lapse, b-roll, angles...just setting the standard for content on KZbin. Grind hard for life!!!

[@dannybenoit]

I like how the exhaust is pointing straight at you.

[@memokalashnikov7836]

XXXD

[@hydroluck5086]

You can see the excitement on your guys face. The detail, time, and effort is amazing. Definitely tell you guys enjoy it and love what you do.

[@VeryWellCouldBeHigh]

I'm just concerned about that rapidly spinning chain between my legs

[@fallingdownahole9706]

Ya hit the brake will also losing a toe. Cool build though

[@VeryWellCouldBeHigh]

@@fallingdownahole9706 definitely a cool build

[@AlbertWesker_GOAT]

He needs to weld a protection, like a motorcycle, if he doesn't want to lose half his leg.

[@user-lo4me9oe9z]

yeah if one of the links lets go its gonna take his leg right off

[@brianphelps2408]

GET A GUARD!!!!!!!!

[@TheWillberry]

Dude, these videos are awesome. No pretension, no drama, just guys working stuff out and being genuinely stoked when they get it right. Quality entertainment.

[@Benzy670]

That thing looks fast as hell, I can’t wait to see it get a full send! Good stuff as always, fellas!

[@thommoss899]

I want this to be 100% clear- This channel is the best thing I watch on KZbin, HANDS DOWN. It's pretty easy to see that a ton of people religiously watch this shit (I seriously look forward to fridays even more for pw builds, just like your other subscribers). Only hope is that you keep it classy and rework that paddle shifter with some kind of gyro. It's been clean for the most part this whole time, finish strong bub!! Love you guys!

[@nwmaxbuilds8740]

16:47 is that another project 🤔. You guys are insane

[@quentin8094]

NW Max Builds I’m betting it is

[@nwmaxbuilds8740]

@@quentin8094 they were talking about getting another body so it could also be that

[@enallane5538]

@@nwmaxbuilds8740 a street and an off road body! camaro body for the street. jeep for the trails.

[@jakebraun6376]

Imagine if they made an awd crawler

[@TrailKing04]

@@jakebraun6376 I was honestly wondering when they were gunna do an AWD build.lol

[@tgsubie]

The fact that its snowing just gave me the craziest nostalgia. Through your videos i feel like ive followed all your adventures all year long and the snow just further proved that this years coming to an end and its just kinda summing up how far youve come in such a short amount of time. Its amazing. Proud of you guys, maybe one day ill run into you and show you some weird builds.

[@jordanlatta]

16:44 "Looks like well have to get another body and modify it for the dirt tires" That green jeep in the background says you already have another body or two around 😳

[@jamesb8560]

You guys are awesome! Your videos bring much enjoyment! For years here I was putting powerwheels body's on cut, chopped and tweaked garden tractors. And you guys took it to a level that is beyond greatness!! I wish to the good Lord above I could meet you guys and see your creativity in person at sema! Awesome guys, keep it up! And stay safe. Thank you

[@Ty-qb1qo]

saw the notification and immediately knew what i had to do

[@leshulsey5674]

No you need a complete ground loop circuit mounted in multiple locations engine ,frame , big gauge wire , solder , no crimping. When your stator doesn't have to work as hard but yet when the DC current flows easily your power across the board goes up . Enjoy your Adrenaline cart. Love it . Sir

[@juniormillsskn6649]

Hey guys I been watching you guys video from day one and am proud to see you guys reached far . Keep up the good work And also u guys need to do a drag race event with those cars u build I think it gonna be awesome. Anyways I from the Caribbean and I love drag race and rc drag race to .. 💪💪💪💪💪😊

[@rongravel4585]

Dude. You guys are beast. I’ve been here since like 300subs and you got to god level in such a short period. Awesome. That is the best ripper yet

[@enallane5538]

you guys should do a "mini mayhem" style event for your fans! the eastern off roaders have carsandcameras and RBG but we don't have any events in the west!

[@KalLanPIDT]

carsandcameras aint even half as good as grind hard though, they drive like whimps and build shitty looking things with weak engines.

[@enallane5538]

@@KalLanPIDTC&C do predator things. GH does cool motors. I don't think one is better than another per se. they do different things.

[@4486xxdawson]

Are you guys on crack c&c have a Ducati go cart also cb cart not all cars and camera's stuff is singles , also they do more builds like the rest of us backyard builders , these guys are good but compairing any of these the offroad cart guys is dumb i like them all and trying to say one is better then the other is just typical guys who talk shit and build nothing . Im building a gs 750 offroad buggyand got idea's from grind hard , cars and cameras , RB , rather be welding . So they are all great and inspiring .

[@robsorgdrager8477]

Comparison of these two is like choosing between eggs and bacon....both are great on their own, but having both in one's life is what it's all about😉😘

[@enallane5538]

@Ret1173 they're both so cool in their own ways and offer different sides of the go kart/off road vehicle KZbin communuty

[@jlucasound]

Snow Bike! Yes! Love that thing (as well as everything else). I am kinda bummed I have to wait until spring (I am assuming) for the completion of the Triumph. Good things come to those who wait. It will also make spring that much more enjoyable!!

[@sambebb5131]

Dam it’s got some kick to it nice job 👍🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@alexherrenbruck9619]

I love it a couple of buddies in an old barn building cool stuff. This is what our generation need more of CREATIVITY and MOTIVATION. You can’t build your DREAMS by sitting on the COUCH!

[@pogonick55]

Last time I was this early they were still playing in the tree house! 😎

[@ZoopZoop]

This build really is amazing, the things you guys come up with is... just awesome! If I was to make that shifter, I would make it so it wasn't connected to the steering shaft, maybe held up in place with a couple support bars. Would eliminate the problem of the shifting bar moving around.

[@user-tf7hf8jp7p]

Here finland we have already about 20cm snow :)

[@mesho4558]

We are in middle east the weather is very hot !

[@user-tf7hf8jp7p]

@@mesho4558 here finland its about - 15 celsius 😵

[@GrindHardPlumbingCo]

Awesome it was -6c here yesterday we can't wait for snow!

[@shynsly01]

I'm so happy for you guys, both for the way your channel has blown up, as well as all the (EXTREMELY well deserved) recognition you're getting in the "Pro" community. Not too shabby for a couple of knuckleheads who seem to have grown up the same way I did... dinkin' around, figuring stuff out for yourselves in a shack out in BFE. My sincerest congratulations, ya'll.

[@D3moknight]

Mad Max called, he wants his Mario Kart back.

[@99milesaway41]

Every time time guys, every single time y'all make something it's totally wild. I love this thing. And that shifting system is freaking genius.

[@NurgalinRuslan]

Прикольно! Экип нужен полноценный и хороший, об дерево вероятность приложиться высокая. Но тачка мудная вышла! Круто! Яб погонял с удовольствием)))

[@Sloppyjalopy123]

U guys are killing it... Love to see how much the channel has grown. Keep being awesome guys.

[@silence___]

16:47 they got a new jeep

[@brandonseiber6499]

I like the ant casually strolling by on the table at 11:15. Great vid

[@yVng_mello]

I’ve been wanting for this

[@hector9684]

Lil Bub I’ve been wanting for this too

[@astonike8383]

Wow you guys should make out

[@offroadman250]

I have one of those Polaris Predator 500 Motors. They won't rev unless there's enough vacuum in the air box to lift the secondary vacuum diaphragm on the carburetor. Basically the engine needs to be choked out a little bit in order for that carburetor to work.

[@joey0727]

Does anyone know the song that starts at 2:30 please been searching for a long time

[@milesprower1871]

kzbin.info/www/bejne/Y6uufnSYmJuih68 finally found it

[@tebeardenkahboom1]

I would like to make a suggestion. I had mentioned this suggestion to cars and cameras and they did try it but it did not work. I think the perfect shifter would be an electric solenoid. They used one off of a Cadillac power door lock solenoid and it just didn't have enough power to shift. They tried to make it shift with the motor off as we all know that it's much easier to shift with the motor running. I know they make solenoids that are directional both push and pull that are high torque as that's what it would take. Then, you can just use a little button one on each thumb area location. Just a thought and please consider it. Do some research and see if you can find a high-torque directional electric solenoid. They also make them that are high torque that are activated by air but it's anybody's guess how many shifts you would get out of a bottle of air. Not many I feel safe to assume. Let me know your thoughts guys. I love the show as I mentioned every time I leave a message. Never got a response back of any kind but that's typical I guess. Moto mule will flat say hello if nothing else.

[@calleadolfsson1226]

This thing needs to have chain guards or your balls will get ripped off😂

[@pensive69]

I'd agree and maybe something called a roll cage? Heck off road trucks have them.

[@randyhare6527]

Your channel and Matts towing and recovery are the 2 best on KZbin! Love your projects.

[@pitbullgamer8116]

Would love to race you with my go cart with a banshee engine

[@onnikallioniemi]

Bruh make a video about it!!!

[@4486xxdawson]

Ya what he said . I would love to see a banshee go cart , sounds awesome

[@AYVABTU001]

2:30 Great shots!

[@nemesisstalker1020]

Don’t look back, there are just a blue shell following you

[@GemCityRCOutlaws]

Some of the sickest drone footage yet,welding shots yet and montages yet. I'm glad you guys are in it to win it! Cant wait to get on youtube and watch some fresh grind hard content

[@liamhebden8857]

I was just thinking... "WHAT IF i HAD THE EXHAUST RIGHT IN MY FACE, THAT WOULD BE LUSH"

[@levidbateman5174]

You guys are the best, so glad you’ve been discovered by Leno and SEMA folks, and all your sponsors as well... just bought the headphones...

[@wyatte5.9l63]

Do the snow bike!!!!

[@gabrielefugazza5604]

Hey guys happy 600'000 inscription!!! I hope all good things for the future!!!

[@xseaofgreen420x]

Was anyone else thinking how the hell is he going to steer when he mentioned the shifting rod?

[@ggpropertysolutionsgraham388]

Exactly!

[@owenstrimdesignllcinc.7325]

You guys make some pretty badass toys, the torch is yours. Keep it up, let the next project be even more insane. Till next time keep on keeping on.

[@lorisbuonemani5812]

Top 100 likes

[@mathewflick2959]

You make the best big boy toys ....keep up the unreal vlogs...all the best...you must get a lot fellas asking you make them one....

[@leslieg3281]

Put a foam filter on bumblebee the Camaro because it will allow more air to your engine therefore you will go faster

[@leslieg3281]

Dude you are awesome

[@MRfoxracing32]

Doing great work guys, I do have a suggestion to your shift and clutch paddles (left side paddle all clutch amd right side paddle split between up and down shifting. This will be much easier to operate.

[@mikimomo97]

Amazing how it snowed there and snowed here too. We haven't had snow in Oct since I was knee high to an ant. Greetings from Iowa, dope as always

[@JJRossi]

Where abouts is their shop? What state? Must be a northern state to have snow that early

[@mikimomo97]

@@JJRossi Idaho I think? So definitely north and around the mountains so its not surprising

[@FloridaMan0561]

These guys build such bad ass projects. I'm glad to see the awesome stuff these guys make and then we get to see these creations get pushed to the max until he lets off the gas or the thing breaks! 🤘🏻Hell yeah,that's entertainment at its finest!

[@anneoosterman1215]

I love to see that the further you go the compicater and better the builds get

[@alexdeshetler8802]

Hands down new favorite KZbin channel! So cool to watch

[@stokeburner6730]

It just keeps gettin better and better. I love this stuff.

[@Steve_Just_Steve]

Man I don't know if I could have admitted the shifter mishap especially after it ended up working, you're a good dude. Crazy how you can do all that one-off engineering then brain fart on something like that isn't it. A mind is a funny thing. Nice work.

[@kmannc]

Love the paddles! Maybe adding a sleeve around the steering column that doesn't move and mounting the paddles to that? Or mounting it via bracket by the steering column bearing? Non-moving or "column mounted" paddles are motorsport preference anyways.

[@readysetnogo]

Mounting the gopro from the mouth guard of the helmet might give a really cool driving angle. It's a really common mounting position for mountain biking because it gives a nice forward view while also showing the bars. It gives a really nice first person view.

[@dunkedoreo]

15:00 It’s a simple spell but quite effective

[@jasonshort153]

Hey on the paddle shifter you should look in to using something like a gyro that's on a 20" BMX bike which allows you to fully rotate the handle bars while still maintaining function of the brakes.

[@TrojanHorse1959]

Umm Edwin, YES! We pretty much want to see anything and everything you guys produce, please!

[@n1tr089]

These videos are edited to perfection! Slow mo’s, sound on point, natural effects… love it! Watched this build about 6 times over now! How much would this particular build set you back in GoPowerSports parts??? I need to know if building ones of these properly is going to skint me!! 🤣

[@hankburton2043]

Good to see the brakes are on the axle with the wheels on it so if the chain snaps you can still stop

[@TronDawg]

love the ride! Inspiring stuff! A chain guard/plate, and front mud flaps and pivoting fenders would help. Also when u make a plate to bolt up to, try over engineer it. Leaving extra material on all suspension components. It will help keep everyone safe, as well as keep parts from needing to be constantly rebuilt. just lookin out. much love!

[@WireWeHere]

As no doubt already mentioned, two cable shifting works very well. Allows mechanical advantage to be set perfectly and steering isn't a concern. A lot more engineering but a hydraulic system for shifting could be interesting to develop. It could be one of those, if you make it available they will use it, type of things.

[@timgolin3883]

Try using a Morse cable for the shifter so it doesn't bind or pull on the shift forks when turning. Looks great so far. Can't wait to see it finished

[@friedtoperfection1138]

2:36 Yo this is so relaxing to watch

[@All_is_self_co]

Looks like so much fun. Your hard work pays off!!!

[@dustinreeher2538]

Awesome videos and builds. Looking forward to seeing the snow bike!!!

[@browngar]

hell ya north Idaho! so stoked to have found this channel, love what your doing!

[@Les__Mack]

Hey guys, I appreciate your hard work and I really love your videos. You make me smile. Thank you!

[@298CRE8]

Budgets for builds would be nice aswell as rough hours etc you guys build some top notch customs and just shows the appreciation so people realise what you do when they aren't fabricators welders mechanics or engineers just how much time and effort goes into a custom toy 👍🤪 keep up the good work and keep us all smiling....

[@jbooh88]

Love that you will be with cars and cameras! Enjoy both channels for different reasons. Keep up with the great content!

[@calebm.5698]

So stoked on this build! You should build a diesel truck with 4wd to be the ultimate rock crawler and to tow the Jeep or mustang in a trailer that would be so cool

[@kylekdk456]

Just a heads up if you're planning a turbo build, turbos do not work hardly at all on single cylinder motors. The single exhaust pulse is not able to spool the turbo effectively, hate to be a buzz kill but it won't work out well.

[@VictorPoulin]

So it is good to have more than one ground when connected with other grounds. If one fails it can rely on the other grounds for a ground. Just sayin :)

[@eyeballengineering7007]

I accidentally sent one of those quads out from under me while WOT. It stood up on one rear tire and did the Tasmanian Devil spin 5 or 6 rotations! Lol, Gobs of torque. Still surprised it pulled that arm up. I bet it was a combination of the shock mount location, G forces, and engine torque. They all pull in the same direction against the shock at that point.

[@CJLeTeff]

You guys build really cool and wicked carts! I like how you don’t hide the failures! 👍👍👍👍

[@reliant_turbo]

CarsAndCameras and Grind Hard Plumbing Co...... Two of my favorite channels.... wish I was going to SEMA :-)

[@NearlyNativeNursery]

Fantastic build and superior welding and bending job. Cart looks tight. With a custom build i am sure there are always things to modify.

[@anthonyottinger2594]

You guys created a whole new genre of power toys, you guys have made three now your friend (whisch I shamefully can't remember the name made the porche, and Rather B welding is making one with a Grave Digger body. These are insane I wish I could make one

[@andrewfriesen692]

1:18 I’m so jealous it started!!! I’m having a real rough time over here

[@cortniesmith3138]

Seeing that snow coming down really hits home that you guys really need some storage space!

[@martyg9110]

How is this channel not at a million subs? Love the fabrication skills👍

[@idcanymore5287]

Pretty cool I like the non conventional stuff never know till you try. Im working on a couple maybe ill show them off if I ever get time. Thanks.

[@andybowyer3602]

You just cant wait to jump in it and let rip! I love it I bet the welds were still smoking hot when you sat in it🤣🤣🤣👍👉💨

[@stephenmcbride6359]

Dude you had me with the "Old school" shop your working in. Fracking love it. All my buddies have the same shop as well. Just with wood stoves, because we live in the Yukon ,Canada. Love the cart. Cheers.

[@D-DAY]

Thanks for keeping me inspired these front engine karts really look fun.

[@scotthaggard4791]

I'm just get n into filming in my shop an I give y'all much props ur camera shots are awesome

[@firemoose76]

Great one guys, look forward to the next one.