First Test Drive of Our Big Block Nissan Did Not Go As Expected!

[@TheQuestionableGarage]

Find out the easiest way to get to sleep, and stay asleep when you click shopbeam.com/TheQuestionableGarage and use code QUESTIONABLE to get up to 35% at checkout.

[@davidrasthammar1057]

I want to se more on the Honda limo.

[@greatbull67]

I like that you show the frustrations too

[@TheQuestionableGarage]

Wouldn’t be real if we didn’t show what it really takes.

[@nicholasdaly7355]

Honda rousey is waiting

[@TheQuestionableGarage]

Soon for Rousey.. going to get the engine ready very soon!

[@andrewkiefer2628]

It’s been so long people don’t get the name reference anymore

[@username_mcusernameface]

When he mentioned the wheel, I started chanting "Honda Rousey" and my partner gave me the "do I even dare ask?" look

[@ryanstandre3648]

Fixing the oil leak at the back of the intake, the one step you're missing is the Shop-Vac attached to the valve cover... Plug up any other oil breathers, dipstick tube turn the shop back on and pack the silicone and it will actually suck it into the leak.

[@rafaelnf]

some cars fight you I shall call it "Earleanor" 😂

[@RoB_666_]

Hey Jared, just my 2c....I understand the need for an air filter while driving on the street, from my own experience (big cube/rpm, tunnel rammed, NA deal) that particular set up tends to throttle the engine in a big way for anything over low/mid rpm use. I'm sure there's others out there that haven't had any issues but it is something to look out for. Alky Digger has a better solution that attaches a large singular filter directly to/over the front of the bug catcher, allows more air flow while also being easy to remove/refit for maintenance etc. Cheers

[@jamesmiddleton8128]

The only permanent solution is the temporary fix that works😮

[@kerrylewis2581]

20:30 That's how it should start. What a beast

[@Barton_Motors_Ltd]

We need the supra! ❤

[@100Percent_Stock]

Looking forward to seeing Earl do some nasty burnouts! Just being parked next to you in the pits at the last Burnout Rivals in April was interesting, I learned a lot just by listening to you troubleshoot! We're also going through the same struggle. We're trying to build another burnout car, and it's been just an absolute struggle the whole way. Looking forward to seeing you in November!

[@TheQuestionableGarage]

They just love to fight! Fun fact of the day, I took an absolute oil bath at the shop and I’m rocking the squonkwerks shirt now!

[@100Percent_Stock]

@@TheQuestionableGarage HELL YEAH BROTHER

[@jonkeau5155]

Don’t feel bad about the Cleetus burnout pit, that event eats any car that isn’t absolutely dialed in, and some that are. Things always get way hotter in there than people expect, you almost have to treat it like a pikes peak hill climb run prep drivetrain wise

[@TheQuestionableGarage]

The cooling system so far is rock solid, we just were fighting that really and fuel distribution so I’m hoping that is fixed!

[@joshrepik]

Isn’t it funny that cars find their limit when you run them to it for an extended period of time? 😂😂

[@tkskagen]

Jared just makes my life seem "easier", as I have my 2015 Mazda3 Hatchback, 2020 Toyota Yaris LE Sedan, and 1978 Ford F250 (¾ton) longbed as usable vehiclies...

[@aquual1462]

When you got so many projects you have wheel to select a project to work one. Some would conside this a sickness

[@TheQuestionableGarage]

Opportunity not a sickness!

[@aquual1462]

I think addiction would have been a better fitting word. Keep it up with the great content.

[@Stephens_offroad_and]

​@@aquual1462A carcaine addiction, to be specific.

[@GeekGinger]

Don’t let perfect be the enemy of good. In other words, don’t be so afraid that it won’t be perfect that you don’t start.

[@geoffdanielson3265]

Biggest example of doing the wrong thing the right way: replaced the clutch on my wife's variable displacement air conditioning compressor with 6 welds to the pulley. Nissan at the time didn't sell a replacement clutch, just a couple grand on a compressor, and the displacement minimum was 0 cc, which, to my mind, is the same thing as having the clutch disengaged (with the possible caveat of what happens if the compressor seizes, but it was on its own belt, so whatever). It kept the AC running in New Mexico for a decade, until the VQ motor managed to drop a cylinder at 175k miles.

[@krapleoj]

I can’t wait for wedding supra, you will be so happy with the results do it for all of us and your self

[@BigBisalreadytaken]

Good to see you're still plugging along.

[@arrgorndenethor]

So glad to Earl leeker running so well!!

[@ste_zace]

Proud channel member here, i support because i love the videos not because i expect extra's

[@herbiehusker1889]

Whats the point of spinning the wheel if you just keep on respinning?

[@TheQuestionableGarage]

Slight comedic value, along with the fact the other cars genuinely can’t be worked on yet. In actual order of spins, it landed in Earl 5 times before anything else, so it really was destiny

[@herbiehusker1889]

@@TheQuestionableGarage lol. That's questionable, Jared

[@jasonelliott6346]

I once hooked a spring compressor to another spring compressor to get said spring out of a truck. Only had to work once.

[@mikekozi-lester3887]

Hi Jared nice video 📹 and workmanship that was a nice Escort

[@reggeckmann3993]

Love the Dude, met David at ice cream cruise few years ago. Neat guy!!!❤

[@taurota1554]

Awesome and outstanding as always.Thanks for sharing and taking us along

[@DeatGaming]

Not really a build thing, but me and my uncle were getting his car ready for inspection and being an old Land Rover it leaked oil, we cleaned the snot out of the back of the engine and used black mastic, it didn't look pretty but it never leaked in the three or four years until it went to the scrapper.

[@donatoj.caputo4112]

Sceckiest thing ive done was pulling a coil spring out of a '74 Javelin/Amx with 6 muffler clamps to change bushing !!!

[@chrislove4594]

The show for Apalachee was very inspiring and insane a great turnout. I would have loved seeing you and the Axe Man driving down hwy 324 that would have been a sight to see . Very enjoyable video.

[@novicracker1980]

@TheQuestionableGarage I really enjoyed this Video Format this time guys nice work.

[@novicracker1980]

THAT IS A MONSTER OF A CAR!!!!

[@TheQuestionableGarage]

Glad you enjoyed it!

[@Rom3_29]

I bet neighbors love Earl.

[@TheQuestionableGarage]

They actually do, thankfully lots of gear head neighbors !

[@b08m4rt1n]

My first intercooler pipes were 2 inch soldered copper plumbing pipes.

[@runsi174]

The Supra is the car i'm waiting for. Mine project car got out of my shop for the 4 time but again it leakes oil, this time from different part so maybe some time soon it will be back on the road.

[@Sydthesloth45]

Want some advice from an Aussie burnout veteran the exhaust needs to be dumped in front of the rear tyres to push the smoke out plus it clears the smoke away enables you to see a little better and it creates a better smoke plume don't believe me watch any Australian burnout comp we Know skids.

[@TheQuestionableGarage]

I wanted to try this to see if it’ll blow the smoke clear ahead for visibility, I know the trick of aiming them at the tires to really launch it out.

[@chrislongbeard]

Luckily I only have room for 3 projects. Keeps me in check.

[@wmejia4122]

Earl Leeker is back! Still a small leak but lives up to the name! 😅 Great stuff guys!

[@ctbryant09]

OH it sounds SO GOOD!! 😫😫😫

[@EnderMalcolm]

So far biggest do the wrong thing the right way with my car has been changing headlight bulbs. By factory design you are supposed to pull the front bomber and remove the entire headlight assemblies. However what I found out is that if you loosen everything a little, you can cram your hands down into a tiny space to swap the bulbs without removing the bumper or the headlights. It takes the same amount of time, but with far less work.

[@Slarty_42]

That car is so utterly obnoxious, I love it lol

[@oyzermans]

The wedding supra should be done with a collab, like Sarah n tuned.

[@Nihil1st1347]

I like Earl's livery.

[@g62412]

83 Corolla 98 civic 08 mustang 14 tremor 08 f150

[@matt3241]

When you where spinning the wheel it made me think of you Santa suit selling that caddie

[@LeonardMagnusson]

before i watch. i like it when you take a dumpster fire and make it run again even better then before.

[@forkmonster1153]

KEEP UP THE GOOD WORK!

[@heavenlychatter288]

I think that the exhaust pipes look better as in the shape of bull horns in front of the hood of the car.

[@prancerthecatto]

You should store the pro drift car indoors just so it doesn't become useless due to rust

[@kickasspowdercoating]

Love the into 😄

[@michaelparker4598]

My best temp fix was on my tdi getta gasket went bad in injecton pump and needed special scanner to set fuel timing so i covered the outside of pump with rtv never leaked again

[@justinpakarno4346]

That thing must be ridiculously loud in the closed shop, it looked like Jared woke up the first time it fired. The header is indeed hot.

[@shockershooter]

I wasn’t paying attention at the end and when Jarrod said “down at Cletus and cars” I swear I heard “Damocles and cars” and thought, that’s a funny name for a car show.

[@jasonjones3]

Love the content!!!!

[@cabbagekitten]

I love your channel so much I'm just gonna set to rewatch on repeat for a few hours. That's got to be worth at least $10

[@dannyshoop1677]

That intro is the best damn intro I’ve ever heard I’m glad I could catch your videos I’m out here in Georgia waiting 90 hours so far for power and water so at least I can charge my Phone in the car and get questionable

[@DeatGaming]

Excited to see Honda Rousey

[@josephvantreeck2989]

thx Jared

[@The_Dork_Lard]

15:41 The last 10% takes 90% of the time of a project!

[@joealex65]

I would love to see David driving Try-Hard and Roadblock at some point!

[@TheQuestionableGarage]

That is the plan to get together and let him run through many of the channel cars!

[@DucNguyen-bd5ir]

That intro was Ken Burns level!

[@timdorrough1233]

I wish I knew! That's 5 min from my house! No clue how I missed this

[@Bearded-Logic]

Whoo, I thought you were about to make a good decision. Great visibility, too. You only have a blower and headers blocking your view.🤣 edit: Oops, my bad. I meant high-rise, tunnel ram intake, dual quads, and an intake hat. Somehow, I forgot it was na.

[@xozindustries7451]

I hope you guys are ok after the hurricane

[@TheAngryDasher]

I'm not ashamed to say I have a collection of spark plugs from several different junk engines that I plan to clean and reuse in the future

[@04glsjetta18]

My wrong thing the right way was actually the wrong thing the lazy way. Had a leaky axle seal and it someone fudged it up and you couldn’t get a new seal in without tearing it. Sooooo I just dumped used motor oil in the trans weekly 😂

[@ronbelanger4113]

Another "Sounds good while drunk" idea rolls down the road.

[@smithjohn3080]

Nothing ever goes your way "bad luck" i guess 😂

[@gorbiebarrow4080]

It sounds like a NASCAR! Thats gonna be an amazing burnout at Cletus n cars

[@surferdude4487]

Earl sounds like he's running a bit rough. LOL!

[@TheQuestionableGarage]

Actually the best its run in a long time! Just doesnt like lots of idling. Handled traffic like a champion, but traffic didn't handle earl that well.

[@surferdude4487]

@@TheQuestionableGarage Sorry, it's a joke. That lumpy idle sounds like a dragster, lining up at the staging lights. You must have a really lumpy cam in that engine. I love it!

[@davidparrish1133]

Hope you didn't have much trouble from the hurricane. It's a mess over near Augusta. I've been on a generator since Friday.

[@TheQuestionableGarage]

We got missed by the worse of it, only out for 9 hours. The gap in the eastern side is what passed over us.

[@trapjohnson]

Most confusing police escort EVER for most of the bystanders.

[@underwaterdroneservices7292]

What ever happened to the concept of electromagnetic valve control? No cams sucking a bunch of power and 100% valve control all done through ECU programming. Sounded good to me.

[@VolkerHett]

Koenigseg does it. So it seems to be a monetary and not an egineering problem :)

[@-DEATHSTROKE]

We seen you Honda Rousey 😍😍😍😍😍😍

[@worldrage619]

I feel like you are the car world’s bearded mechanic.

[@MurlocRacing]

omg Clarence..lol nice segway :)

[@ezacher4634]

You should plumb in something into the headers for burnout competitions so you get red and blue smoke shooting out! And put that radiator back in the engine compartment. It looks like ASS!

[@TheQuestionableGarage]

The rear mount radiator gives me substantial more volume and keeps it safe from any nose hits

[@ezacher4634]

@@TheQuestionableGarage I see your point on volume for sure.

[@EvilEndz]

I do hope you have some rodent deterrents in those cars with the expensive wiring looms ;)

[@M.Boatwright]

Turns out Earl will behave if it's for a good cause.

[@stephsq123195]

Omg love Clarence 😂😂

[@boredom.victim]

Jared, I ❤the channel and I was wondering if you would have any advice, since I'm thinking of starting a channel of my own... GREAT JOB EARL 👏 ❤

[@TheQuestionableGarage]

Be genuine to yourself, make sure you remember to add a little extra energy to the camera because you loose a little bit of it on film, and audio is super important. I’d get 4-5 episodes done and ready before launching so it takes some stress off the posting cadence

[@boredom.victim]

​@@TheQuestionableGarage cool, thank you so much - if all goes well, I'd like to visit and drive the tail ❤

[@dalebryant5754]

Wish I had the confidence to just have projects, my Towncar is just sitting there without 2nd gear, I want to to just do a lower mileage swap but I'm nowhere near confident enough in myself to do it.

[@mikescherrer4923]

eh just do it it's just bolts n hoses and shit. I was in your position at one point, I just did the thing and figured it out. Sometimes you do stuff twice, sometimes you screw stuff up. But it's worth it in the long run. Just research diligently and take lots of videos of disassembly lol.

[@ericg7044]

You just gotta get in there and start. You'll learn as you go and by the end you'll be ready for the next one!

[@Mcgiever100]

Would tdc of the valve without a dial indicator be close nuff for .018 lash. 1 deg would chance the .018 lash.

[@QALibrary]

One project down another 42 cars to go

[@IggyInBurnaby]

Killer intro

[@EdDale44135]

Great event for a good cause….

[@flyingpeter]

what you gonna do with the ls lexus drag car?

[@Drfudd]

Jared, Are you going to be at Tavarish's Wrenchwerx, or are you otherwise busy that day?

[@TheQuestionableGarage]

I will not, I do not work or associate with him in any way.

[@duvalcounty1248]

so was it even worth spinning the wheel if you knew you were trying to get that car ready for a car show

[@GRUMPYOLDSURVEYOR]

Just cool 🎉🎉🎉

[@GeorgeMcNally]

Just exactly how many cars do you have?

[@TheQuestionableGarage]

I just got rid of one, but it was trading for another, so the same number as last week. Including the wife’s, 14.

[@TheGabekemp]

Jared, you get through Helene ok?

[@TheQuestionableGarage]

We were blessed and only had a short power outage and some erosion on the hill sides at home but nothing major.

[@danatkinson6698]

Why work on the projects you have when you can bring another home? 😅

[@BetterCallGatto]

When are we going to see the honda rousy?

[@TheQuestionableGarage]

Going to work on her drivetrain soon. Working a little on each of the projects moving them all forward

[@Tushka154]

Why put cars on the wheel that either don’t need any work or can’t be worked on? 🤔

[@josephknowlton7246]

Liked, shared and commented 🍻🤴🏻🗽 34:17

[@marydrew124]

Where is the burnout 😢

[@luckcab]

Does this mean that it worked or??

[@TheQuestionableGarage]

It at least is able to drive through traffic.

[@tijn1979]

I was done when you went for the third spin. Bye

[@smithjohn3080]

3:22 this bit was dumb and unnecessary 🤮

[@samfuller6273]

Why were they on the wheel then? It defeats the whole porpoise of the chance wheel. Dumb.

[@markomurka]

Why the heck americans buys wrench sets and sockets and so one? To show off for other people? But uses only one adjustble wrench which runes the nuts and bolts. Why???

[@ni_wink84]

Shhhh adults are talking….

[@Sean-John]

😊

[@dakotahneal8110]

When can we expect new Freddy content?

[@TheQuestionableGarage]

Never, I do not work with people of his moral character

[@ste_zace]

@@TheQuestionableGarage its a shame it came to an end for whatever reason, but i understand

[@dakotahneal8110]

@@TheQuestionableGarage I still don't know what happened