Fisherman's Secret : STRONGER Than the FG Fishing Knot - Braid to Fluorocarbon

#fishingknot #fgknot
Fisherman's Secret : STRONGER Than the FG Fishing Knot - Braid to Fluorocarbon
"Discover the Fisherman's Secret: Unveiling the Power of the STRONGER Than the FG Fishing Knot - Mastering the Art of Braid to Fluorocarbon Connections!"

[@pat632]

Wow, great turtorial mate!! Thanks for sharing!! 🤜🏼🤛🏼🎣💪🏼🎣

[@pescadorestamora]

You're welcome. Thanks for watching ☺

[@davids1314]

C du solide c sur mais, honnêtement je suis pas fan bcp trop long quand t au bord de l'eau !!!

[@pescadorestamora]

@@davids1314 alors vous pouvez utiliser un nœud de pêche plus rapide. Comme le nœud Alberto ou Yucatan

[@1789ep]

I am going to start listening to this music when i am rigging. Very soothing

[@pescadorestamora]

Wow, this music is very calming, isn't it?

[@Rbowers1965]

Great tutorials on fg knots and variations. Thanks

[@pescadorestamora]

You're welcome

[@mendadakchannel]

Thanks bro.... I can try this knot 🙏🙏🙏

[@pescadorestamora]

You're welcome, and good luck

[@NawutFisfing]

Thank you for the good technique.+1

[@pescadorestamora]

You're welcome, good luck

[@johnnyearliwine6698]

Great knot. Have to try it.

[@pescadorestamora]

You must try it 😁👋

[@GeneFishingTV]

I like this knot buddy

[@pescadorestamora]

Me too 😁

[@bertlindsay]

Great knot, will give this a go. Question, When you go back 20 wraps, is it essential you stay right inbetween the previous made wraps or is it ok if some overlap the braid from the first 20 wraps? Ta

[@pescadorestamora]

It should be possible, because in the last 20 wraps after you finish with the first lock, you will pull it into a smooth braid like I did in the video. but if you repeatedly overlap the nodes, it will make it difficult for you to pull out the first lock. hope it can be understood 🙏

[@captainjoesanglingadventur4894]

Looks somewhat easier then the FG with all the wrapping around your fingers, standing on the line etc. Same result a good knot just seems a little easier Thanks

[@pescadorestamora]

if you use a bobbin to weave into the leader line, this knot will be much easier 😁

[@reefnreefer]

Cheers buddy!

[@pescadorestamora]

😁🎣🎣

Great tutorial, thank you. Sometimes my FGs slip off the Fluoro when I tightened so I am going to try this one.

[@pescadorestamora]

You're welcome, then you should try this knot

[@gavinlangford2984]

Can this be used to tie two different thicknesses of braid like thicker braided leader to thinner main line braid??

[@pescadorestamora]

I hesitate to say, because I've never tried it. But I recommend that you use the Alberto knot to make braid-to-braid braids and I have used the Alberto knot and the results are good. Next video I will make a tutorial

[@gavinlangford2984]

@@pescadorestamora So the Alberto knot is the strongerst braid to braid connection?? What about the slim beauty??

[@pescadorestamora]

@@gavinlangford2984 I only recommend alberto, because I use it. As for fineness, I think it can be used for UL 6-15lbs fishing rods

[@frederikmare9002]

Yes the PR knot is very effective for joining braid of different thicknesses. This knot is known as the PR knot and is indeed stronger than the FG knot. It is usually tied with a special bobbin.

[@pescadorestamora]

Agreed, but if you don't have a bobbin, a PR knot can also be made without a bobbin

[@casallr7271]

Top demais amigo

[@pescadorestamora]

você deveria tentar amigo

[@expansioniskeyrn]

Can yah make a video for light leader line like 2-6lb? All theses type of knots like these will snap needing to pull soo hard to synch..

[@pescadorestamora]

If you tie it properly with a knot like this, it won't slip. I myself use it for a 3-6lb fishing rod.

[@expansioniskeyrn]

It doesn’t slip. The line itself snaps when pulling to make it tight.

[@pescadorestamora]

sorry, I just understood what you said. what you mean is, let me try making a video with a 2-6lb leader line, is that correct?

[@expansioniskeyrn]

Yes please 😊

[@pescadorestamora]

Next video 👍

[@maxmanivanh6240]

How do you guys lock your rizzuto? My rizzuto always starts to unravel after a few casts.

[@pescadorestamora]

You can see directly how I tie the rizzuto lock in the video. I always end the rizzuto lock at the end of the Fg, PR and Sc knots. And it never unravels

[@newbreedian]

I know this knot is amazing! And I love the art of it. But I can confidently say, I will never take the time it takes to make this lol. I’d do all that and then just get snapped off by a barracuda or get snagged and be pissed. 😂😂

[@pescadorestamora]

Because it takes longer to make than alberto knot

[@peterheinrichs7634]

Some humble thoughts... 1) I'd say the strengh should be the same a the fg knot. Based on the physics, both knots use to take a bite into the leader. 2) Because the fg is bound with both ends of the main line from the same side instead of coming from one side, turning and wrapping back, the bite into the leader might be even better than your version? But... with 20 wraps it shouldn't matter any more. ;-) 3) The last knot (a grinner?), I'd make it a little bit different. Here's how: instead of wrapping the knot around main line plus leader, I'd rather make it over main line only. Here's why: the connection between main and leader should be rock solid by the 20 wraps. These last overhand knots and the grinner should only be nessesary for securing the end of the main line. The grinner with main line only is slimmer than your version. It ads a step in diameter between main line and knot. So, the end of the leader is kinda hidden behind the grinner. I'd argue, it makes it easier to go through the top ring while reeling in the line. These kind of knots tend to be pretty stiff, so, it makes a difference. Just some thoughts. I really loved your video!

[@pescadorestamora]

Thank you my friend, your explanation is very helpful for me

[@ExploreFishing]

I like this hibrid knot half Tony Pena and half FG… the only critical part in my opinion is the coconut oil that stays slippery while i would use saliva

[@pescadorestamora]

And when sailing, I also use saliva to moisten the knot 😅

[@milusikmancing]

It really look sp strong

[@pescadorestamora]

It's really strong, sir, I've tried it

[@tannermiller3031]

Alberto or Albright, but without doubling over the leader. Interesting.

[@pescadorestamora]

This is a PR knot and not an albright or alberto 😊

[@xino1one]

PR knot done without a bobbin. PR>FG nice video

[@pescadorestamora]

Thank you. you can also see the PR knot using a sinker

[@hakankus5767]

buy a bobinknot asist von shimano make it more faster stronger and easier...

[@pescadorestamora]

I do not have the funds to purchase it 😅.. So I am using whatever I have

[@demzunoplayer]

It is a PR knot. Done without the tool. With some dodgy wrapping, more half hitches than you need and a good resutto finish. Takes too long. The school has moved off. But thanks for the show.

[@pescadorestamora]

Thank you again. this is indeed a PR knot and I made it without a bobbin because I don't have one. So I made it in a simple way and just used my hands 😁

[@racrx7]

Knot stronger than the FG knot!

[@pescadorestamora]

Yes, this is a PR knot

[@fishhunter348]

Effectively tied an FG knot with 20 loose wraps

[@pescadorestamora]

👍👍

[@gabrielduarte3904]

that is a pr bobbin knot W/O the bobbin and less wraps.. so i doubt it will hold more than a well done fg

[@pescadorestamora]

@@gabrielduarte3904 👍👍

[@glennunderwood4690]

No coconut oil ty...

[@pescadorestamora]

That's right, just using saliva will do the trick

[@anglerperakterkumpautersakiti]

any knot is strong if u do it correctly

[@pescadorestamora]

Thank you for your advice, sir.

[@DavidHodkinson-ps1cb]

Get yourself some sharp scissors

[@pescadorestamora]

OK sir, I have sharpened these scissors to be sharper

[@mmc2377ify]

So an FG with coconut oil?

[@pescadorestamora]

I don't use oil for the FG nodes. But for the PR knot I use it to be smoother when pulling the braid

[@KingPogsit]

SC knot process

[@pescadorestamora]

Many say this is a PR knot

[@KingPogsit]

@@pescadorestamora exactly.. a pr knot master..

[@pescadorestamora]

True, you should try this one knot

[@DavidHodkinson-ps1cb]

But we'll done

[@pescadorestamora]

👍

[@MartinGoblet-be]

It can't be stronger than the FG knot, because it's a FG knot ! Just the technique is different. Thanks for sharing it.

[@pescadorestamora]

You're welcome, actually this is a PR knot, but made without using a bobbin

[@pescadorestamora]

thank you, please tell me what kind of concept I should review

[@snappyvalleyfishing]

@@pescadorestamoraI was going to say this is a PR knot. I use an FG on most of my rigs except my heavy jigging set where I use 80lb braid and 100lb leader - this is when I use the PR knot.

[@pescadorestamora]

@@snappyvalleyfishing Tell me bro, so what type of knot do you think this is? 😁🙏

[@snappyvalleyfishing]

@@pescadorestamora I would say it is a PR knot. Typically though, a PR would have 30 winds. (IMHO). Like I say, I only use this on my heavy jjgging set up.

[@lisaAIdol]

i ain’t got time for an 8 minute knot

[@pescadorestamora]

It only takes 1 minute to tie this knot, if indeed really tie it

[@skippt2]

It's actually a knot you tie prior typically, if you break off you've learnt to tie it in a way that doesn't teach others. Otherwise, you're right a basic knot might take you 8 minutes, who am I to judge your abilities.

[@ouks5]

It looks like PR knot without use of the tool.

[@pescadorestamora]

Yes, this is a PR knot

[@ouks5]

Well done

[@pescadorestamora]

You can also see the video on making PR knots using sinkers on my channel

[@ouks5]

Awesome, I'll check it out. Thanks

[@pescadorestamora]

Thank you and nice to meet you. May you always be filled with happiness

[@redfish-vg9dj]

Wow, spend all day tying, not fishing, then you forget the coconut oil, and the whole day is shot.

[@pescadorestamora]

🤣✌

[@thysgreef7510]

Ten minutes to do this

[@pescadorestamora]

It should be faster, but if I make it faster. Can it be called a video tutorial? 🤔

[@robertcox9226]

Not an FG , that looks like a bobb8n knot without the bobbin

[@pescadorestamora]

This is not an Fg knot, sir, many say this is a PR knot without bobbins

[@KantoBassTV]

HAHAHAHA!!!! Thats is still a FG KNOT... just being twisted from front to brack.... i got THUMB NAIL BAITED LOL

[@pescadorestamora]

But many say this is a PR knot

[@KantoBassTV]

@@pescadorestamora i can seee you agree it's still an FG knot, only a different way of tying it. lol

[@pescadorestamora]

@@KantoBassTV 🤣

[@SciD1]

It's a bit ridiculous. I don't have ten minutes to make a knot. I'm sticking with the Carrot knot.

[@pescadorestamora]

😅

[@minhadventure]

Still FG knot but done by each side. It takes more time than normal FG knot. Imagine when you have to do it at the fishing site .... do it then you will see the difference.

[@pescadorestamora]

Most people say this is a PR knot without a bobbin

[@befmx31]

Shoot, I can't imagine tying a FG out on the boat. I can tie the FG. Not a pro but I can tie one.

[@pescadorestamora]

There's an easier way to tie the Fg, you can tie a braided line to knob reel. You can find it on my channel 🙏

[@johnnyjj2712]

uni knot would be easier.

[@pescadorestamora]

If you use a 60lb leader line, it will be difficult to use the uni knot.

[@johnnyjj2712]

@@pescadorestamora ok

[@MRFIXIT3895]

It takes too long to tie The FG knot is easer

[@pescadorestamora]

Thank u 👍

[@FishNFoolLures]

This is the same basic knot as the FG tied in a different way is all. It uses the same Chinese finger trap method and half hitches so the strength would be exactly the same! And its spelled "KNOT", not node dipstick. lol

[@pescadorestamora]

Thank you for taking the trouble to scroll and provide criticism 😁

[@dharmakusuma2560]

PR knot without bobbin❤❤❤

[@Mrhawklanz]

no thanks. too long, too much effort.

[@pescadorestamora]

😁

[@nikolayd.3399]

Coconut oil 😂😂😂😂😂😂😂😂😂😂😂 Just spit on it man

[@pescadorestamora]

🤣Just use saliva, bro

[@stosicmilan]

Complicated than FG but not stronger.

[@pescadorestamora]

😁

[@s2perman]

Too long to do. I can almost ask the knot out on a date, coconut oil and all.

[@pescadorestamora]

Actually, I use water from my mouth 😅

[@georgeweiss2137]

Way to long, gotta be done in 60 seconds max. Imo

[@pescadorestamora]

Actually this is quite fast, but if I make a video quickly. Can other friends follow it?

[@georgeweiss2137]

@@pescadorestamora why wouldnt they.???

[@pescadorestamora]

If you watch a fast video, you will definitely get very confused

[@theodgracia1281]

@@pescadorestamorathere's 3 option video speed

[@jaebeebalanagjr.9821]

Its still fg so... 🤷

[@pescadorestamora]

This is a PR knot without a bobbin

[@at_tro_sizematters]

Zzzzzzz

[@pescadorestamora]

☺☺😅

[@at_tro_sizematters]

@@pescadorestamora it was a great video. I just wanted to be funny. Keep up the great work.

[@pescadorestamora]

Thank you, sir 🙏

[@jezzadelirious4921]

8min to tie this knot. No thanks

[@pescadorestamora]

😂

[@f1hook]

If he tied it any faster, you would be crying that you couldn't keep up 😂

[@pescadorestamora]

sometimes I'm confused. If I tie it faster, can the video I make be called a video tutorial?

[@babefishing4921]

FG knot more better

[@pescadorestamora]

Ok 👍

[@robertcox9226]

Wrong, that is the pr bobbin knot tied by hand stronger . Also there are many variants of the FG knot as low as 70%to as high as low 90% The GT knot for offshore size line is also very strong (doubled line ) not the copycat knot. Sc knot is faster than Fg and nearly as strong

[@babefishing4921]

Still FG knot😎😎

[@pescadorestamora]

You can see how I tie a PR knot using sinkers in my other video 😁