Hot Stamp Jigs with Toaster

[@crashibo]

Every peace of detail that you giving is worth of gold ,thank you very much sir.

[@kapetgian]

Clever the idea with toaster! We really enjoy all your video, greetings from Greece!

[@FishingVarna]

Thank you!

[@pantnats]

Η σιλικόνη που το παταει είναι η ίδια που έχει κάνει το καλουπι?

[@jennijaouen3686]

Where do you find your soft silicone for hot stamping? Thank you

[@TemporadadePesca]

What kind of paint do you use to prepare the baits before applying the holographic foil?

[@FishingVarna]

www.ebay.com/itm/185294048829

[@1FishinAddict]

Looks like wood glue

[@gilmarmendes8325]

Very very good this video. Congratulations

[@jeremiashernandez2854]

A cabo de ver tu vídeo y me gusto mucho, en el jigs verde , como le das ese color y que pintura usas?

[@pascualduarteperca]

Well explained video. Thank you very much for posting it.

[@nickargue8696]

What lure mold do you use

[@RR-jw6yz]

Thank you! I liked the video very much. How do you prime your baits?

[@FishingVarna]

I show it in the video. Use a primer for lead.

[@fishing_in_blood]

some says silicone rubber sheet and some says silicone spongue...what should you use...bit confuse between those

[@dndLure]

Beautiful Stamping Foil,,, 'n nice way to do it .

[@vekash100]

I have SS trollibg spoons can I stamp foil on it with the same method and can you please make a video on how to paint on spoons thanks

[@fishing_in_blood]

which kind of sheet you use for hot stamping....and what is the thickness of that sheet???

[@fishing_in_blood]

is it any difference between silicone rubber sheet and silicone sponge... what should I use for hot stamping on metal jig and what thickness of sheet should i buy

[@FishingVarna]

We have the right Silicone pad you need. Follow the link below. This one has the right softness and thickness: www.ebay.com/itm/184788315648

[@AmateurFishingThailand]

I like this foil

[@FishingVarna]

It is available here: www.ebay.com/itm/184788411672

[@cristofgr41]

Buenas amigo! Ese metodo serviría para señuelos de plastico?? (Rapala)

[@henrygonzalezloaiza1825]

Buenas noches quería preguntarle qué material es esa cómo caucho dónde lo consigo en Ecuador gracias

[@gasanesa3851]

What is the coating before the installation of the stomach

[@FishingVarna]

www.ebay.com/itm/185294048829

[@stevemarks3538]

Could you let me know what make of paint your using as I’m using expensive spray epoxy, love the lures

[@FishingVarna]

Do you mean the primer before foiling or the final transparent coating?

[@stevemarks3538]

@@FishingVarna yes my friend

[@FishingVarna]

@@stevemarks3538 www.ebay.com/itm/185294048829 www.ebay.com/itm/183210862757

[@pedrorodrigues-e8r]

Hey afther stamping what varnish do you use wen the lure is finished ? Ive tryed acrílic and it gets darker and looks realy bad

[@FishingVarna]

Hi. We can answer all your questions in FB. You can send us a message here: facebook.com/profile.php?id=100063552371317

[@timclarke1791]

Could you please recommend a good primer that will key to lead lures plus stick my hot foil tried hammer rite non ferrous but my hot foil won't key to it at all many thanks if you get back to me

[@FishingVarna]

Please contact us on Facebook or via email

[@Erdogan3535]

Great video.. what is the material you use in the jig heart?

[@JOKATFISHING]

Como se llama o como puedo conseguir esa goma roja y la blanca.cn verde?

[@ahmedreda1900]

Want the name of The paper you stick on the gigabyte

[@myotherme]

Hi, this video answers a lot of questions in my mind... May i know what kind of silicone do you use in making jig molds? Thank u in advance more power to you!

[@РадмилНиколов]

Браво, добра работа и отличен резултат !

[@beardedfishingmd5232]

Hello, what’s the name of that jig mold? Beautiful job!

[@FishingVarna]

Hello. This is our model of jig, 50 gram. We actually have a listing for this mold, it is part of a kit including hot stamp foil + silicone pad: www.ebay.com/itm/185522598336

[@dikaputra1806]

Bang saya tempelin stiker foil ke metal jig dasaran cat Pilok , pas di pres bagus tp kok warna hologramnya hilang JD putih silver biasa

[@ULfishingPh]

nice master , what the name of the primer?

[@FishingVarna]

You can use many different brands, it just has to be for non-ferrous metals (copper, lead, aluminium etc.)

[@giorgosvfr]

Excellent job as always my friend What’s the name off primer?

[@FishingVarna]

You can use any brand of primer, just make sure it is a primer for non-ferrous metals, this means copper, aluminium, lead etc. Look them up online, there are many available brands.

[@6894Fernando]

@@FishingVarna can you recomend me a brand of primer?

[@balikkampi]

What product do you use for lining?

[@FishingVarna]

This is it: www.ebay.com/itm/185294048829

[@juanlorenzomartin8842]

Por favor donde se consigue el material rojo gracias un saludo

[@FishingVarna]

www.ebay.com/itm/184788315648

[@aliguzel7269]

Kullandığınız silikon özel yapım mi ismi nedir acaba spesial soft silicino

[@FishingVarna]

www.ebay.com/itm/184788315648

[@Erdogan3535]

Could you please list the brand of primer you used?

[@FishingVarna]

www.ebay.com/itm/185294048829?_ul=BG

[@leandrobianchi8258]

hello how are you, could you tell me what paint you use. If you have a special brand to look at its components, and see if I get it in my country Argentina. Thank you

[@FishingVarna]

The paint brand is Createx.

[@leandrobianchi8258]

@@FishingVarna Thanks you

[@dominictorotoro6490]

Hw much silicone pad?

[@FishingVarna]

www.ebay.com/itm/184788315648

[@theodoredr6169]

do you have to put primer again in order to paint ? Or you paint directly on holograph foil?

[@FishingVarna]

A coat of water based varnish on the foil first, then paint over it.

[@ahmadterro4254]

Hi Good job 👍 Are you using lacquer coat before stamping? What kind?

[@FishingVarna]

Use a primer

[@ahmadterro4254]

@@FishingVarna what kind of primer?

[@FishingVarna]

@@ahmadterro4254 Look up primers for non-ferrous metals (lead, aluminium, copper etc.)

[@fishingtrollspinninglabara7241]

What about stamping plastic hard lures (jerbait/minnow) ? :)

[@FishingVarna]

Yes, this foil and silicone work on plastic hard lures too.

[@timclarke1791]

Great video.. I am learning to make my own lead jigs .. struggling to get hit foil to stick you make it so easy I’ve got quality foil because I’ve bought it of you on eBay .. does it only work if you primmer the lures properly like you show in the video ?

[@FishingVarna]

Yes, you need to apply primer first, especially on lead lures. The key is to reach the right temperature and to apply enough pressure. The pressure from your toaster might not be enough. You can just heat up the silicone pad there, take it out and press it against the lure outside the toaster applying a lot more pressure.

[@shaneswnyfishingadventures3726]

What kind of primer do you use on lead?

[@kevindeckers5316]

After you add hot foil. Do you use something to secure it more to the lure. Are is this strong enough?

[@stephenregan2214]

Link to the silicon pad? That looks much softer then the one I have

[@FishingVarna]

It is available here: www.ebay.com/itm/184788315648

[@dierpecas6437]

Hello good afternoon that silicone as I get it I am from Tuxpan Veracruz Mexico hope you could help me by giving me a linck from where to buy it thank you very much and excellent videos I hope you give me next answer

[@FishingVarna]

You can order it here: www.ebay.com/itm/184788315648

[@magnumopus00b]

Excellent video! Where you buy the transfer foil?

[@thewarpsyrhead]

The video description has links to the products

[@FishingVarna]

You can find the foil here: www.ebay.com/itm/184788411672 and the silicone pad here: www.ebay.com/itm/184788315648

[@magnumopus00b]

Thanks

[@bg47beats66]

What toaster are you using?

[@mosicaitapoa]

Show 👏 Parabéns por compartilhar.

[@benzeeno8150]

Just what I was looking for. Thank you.

[@johnyglock32]

Any toaster reach this temperature ?

[@FishingVarna]

Yes, easily.

[@karlovukman7586]

Great work! Do you have link for hot stamping foil?

[@FishingVarna]

Yes. It is available here: www.ebay.com/itm/184788411672

[@48gunk]

Hi, which brand paint do you use ?

[@FishingVarna]

www.ebay.com/itm/185294048829

[@djvbg2781]

How many grams are these jig

[@FishingVarna]

40 g

[@seanbrooks1476]

What do you use for a clear coat? Thanks

[@FishingVarna]

www.ebay.com/itm/183210862757

[@6894Fernando]

Excelente, me hacia falta agregar el primer. gracias

[@FishingVarna]

www.ebay.com/itm/185294048829

[@sddiymakeitworthit7512]

Good work is super

[@militarist7777]

Круто получилось.

[@AntonMoquin-vg1sy]

Play video @ 2X speed to view at normal speed. You're welcome.

[@AeroGraphica]

This video plays just perfectly a X2 speed.

[@TeamCauCaTroiay]

hello

[@barbenoire9448]

désoler quand je vois les manips qu il faut faire je préfère largement l adhésif , en plus bonjour la facture de courant !!

[@FishingVarna]

kzbin.info/www/bejne/ZnfRiph3ZqipftE&ab_channel=VarnaFishing

[@kalamfishing5601]

Good

[@speedyshow7119]

55usd???? On aliexpress 10usd

[@oignon-chokapik]

oh ..... you have a link ? thanks :)

[@FishingVarna]

@@oignon-chokapik Here is a link to the Silicone Pad listing: www.ebay.com/itm/184788315648 Here are the foils: www.ebay.com/itm/184788411672

[@FishingVarna]

Thank you for asking. These are very different things you are comparing. Our Silicone Pad is designed and made specifically for this purpose and does the job it is made for.

[@recifedepeixes]

Clever

[@Decrypt_Symbol]

❤🇹🇷👏👏👏

[@thomyjigspescadeorilla9567]

Hola muy buen video, me gustaría saber como se llama el material que le aplicas al jig antes del holográfico el se color amarillo, o como buscarlo saludos desde México

[@FishingVarna]

Hi. It is called primer. We offer it together with the silicone pad here: www.ebay.com/itm/185287363259

[@denizyldzbalkavmalz.gazipa5658]

thankyou for your nıce vıdeo congratulatıons like 151

[@TheJollymice]

Thank you so much!!!

[@callove6352]

teman saya berlangganan saluran Anda, saya menonton video yang banyak, saya ingin membuat proyek seperti mesin ini untuk saya, bisakah Anda memberi tahu saya apa ketebalan dalam milimeter selimut perpindahan panas silikon, saya menghargai video Anda di sini Brazil

[@FishingVarna]

www.ebay.com/itm/184788315648

[@harrywilson2225]

A lot of expense time and effort, for what must be cheaper to buy ready made .

[@ivansicenica2134]

That's not the point. And no it's not cheaper to buy jigs in store. One good jig cost from 10€ to 15€ and making one yourself cost 2€

[@RealHanbeats]

Omg so slow video 😅😅😅

[@paolosalaguinto262]

I dol bigyan moko ng CELLPONE para omonlad namn KZbin channel

[@laservlx]

That was the slowest, most painful video to watch . At that speed you will be over taken and crushed by a glacier. You could easily have cut 10 minutes Shit I left when you were urging it in , I came back from the kitchen with snacks just in time to watch the power light come on .

[@aldenbaraquiel7142]

Very slow,