1 Month in 10Min! Tiny Boat Restoration! (Timelapse)

[@steveboyer4689]

Great video Timmy. Well done on another boat build mate

[@debbiemyers8589]

Love the crab pot holders, bro u need to get a patent for that, it will take off 💥💥💥

[@Rubbernecker]

Nice build! Glad to see that I'm not the only one that welds barefoot!

[@Linny14]

Respect the amount of welding you do. You do it right too so major props!💪💪

[@Gavin_McGregor]

That’s sick, well done mate!

[@coreymitcho]

It’s refreshing to watch a tinny build video that isn’t a hack job 😅I love the crab pot storage and Im definitely stealing that fuel line through a gland idea. Awesome work!

[@nivagnitsua5401]

Love your work Timmy ✌️

[@daveraymond2265]

Outstanding work. Bravo!👍

[@mathewmay5361]

Timmy, this tinny came out amazing, job well done. Enjoy it

[@zanelorimer4030]

Thankyou for the inspiration, well done and congratulations on a great build 😊

[@fortressfrazze3777]

Awesome built guys.

[@thibaultdefranceschi1483]

What do you spray first ? With the garden hand pump ?

[@youngfisho]

Sik build Timmy. Perhaps u need to become a boat builder full time. Definitely some good ideas in such a small package.

[@martyke17]

love the passion and hard work you put into everything you do mate, love your vids thank you.

[@slam5263]

Hey Timmy, What was the stuff in the blue spray pack to clean up the aluminium hull??

[@bengearing1241]

I'm guessing it's something with phosphoric acid in it. That's usually what's used to make aluminium shiny white looking like that. It removes all the oxidation (rust) and leaves pure aluminium behind. If you spray it with a sealer or chemical conversion coating soon after, then the pure white colour will remain. If you don't treat it quickly enough it will build a layer of oxidation (aluminium oxide) from contact with the oxygen in the air.

[@zanelorimer4030]

It had me tossed and thanks for the information 👍

[@NRK1988]

It's most likely alloy bright

[@nickwest2699]

Great video and great little project you did there. What was the wash you were using that brought the aluminium back looking like new?

[@LostFishingAus]

That was SO SICK!! And really all you need! Something so obtainable for the average punter like myself! Cracken job brother! 🤙🏼

[@jdmec81]

That is a PREMIUM boat restoration! Great companion boat to your big boy too. You can do it all now.

[@BRICK_RUST]

i hope to also see some barra n jack fishing out of it

[@mikaerekiriona8167]

Awesome videos man, been meaning to watching your content over the years… 🤙🏽

[@ParkedKar]

This just popped up on my KZbin feed, I recognise the name, are you the fella that used to fish of a pallet with an electric motor ?

[@jackjames1543]

That’s the boy

[@ParkedKar]

@@jackjames1543 and now he’s just quit KZbin :(

[@lukelofgren4108]

Turned out awesome! I wouldn't hesitate bringing that boat out in the bays in Alaska to set some pots and slay some rock bass and halibut. I've got a little 12ft rated for 10hp i want to beef up and run my 30hp 3cyl 2 stroke yamaha. Best motor ever!

[@christianmorriswilliams7072]

I see that George teaching about welding paid off.

[@gsh341]

Simple and clean. No wasted effort, but 100% able to catch fish.

[@descent815]

GREAT JOB1!! Boat looks amazing

[@abcxyz-lj3pk]

awesome video, thank you for sharing it! i enjoyed it very much

[@Jazzy78910]

Which aluminium leaner do you use?

[@robt9767]

My feet burn just looking at that boat.

[@TOM20000]

Well done Timmy! Looks mint mate

[@paulholubecki6386]

Well done.. Does the trailer have brakes. Couldn't quite tell in the footage

[@alanjohnston243]

Absolutely friggin mint mate, great job 🍺🍺

[@lukegodbee1520]

That turned out mint mate 👌

[@chrisrobinson9332]

I love how the whole front deck is one big ass lid..

[@Aussie21717]

Excellent work. I hope it's your own boat cause otherwise it's the most over capitalised 4m sea hunter in Australia though. 15k worth of work and materials for a 7k boat.

[@dt9094]

Great work 👍🇨🇦

[@barenekid9695]

Question What was in the White plastic Sprayer that cleaned/turned the ali back to shiny new ??

[@wills5482]

That's a lot of work for a small boat. Was it financially viable?

[@kaiopitz8211]

nice work. what was the weight of dingy b4 and after? ty

[@hennies9509]

Looks great!!! 👍🏻

[@poepflater]

You are a great welder... I'd build a cap that goes over the boat when it is being stored.... will keep it fresh and new and out of UV rays breaking stuff down

[@Evan-bc6nb]

Using those kegs like that brings a new meaning to the term keg stand.

[@neiljones9229]

So good👍🏽

[@BradleyBellwether-oy2qi]

Freakin sweet!!! I'd have liked to see how it sits in the water and drives with the extra weight on top. Any plans for a shakedown and/or fishing video?

[@BR0SE1DON]

That was awesome!! 👏🏼👏🏼👏🏼👏🏼

[@Eastie_]

Epic! You've become quite the boat builder mate! Is that what you do now? Do you work for George?

[@coopadupa]

was just about to say that. goes pretty good! dunno about the lack of shoes though, ally die grinding burs and swarf isnt the kindest on ur feet hah

[@2Littlecampers]

Would love to know what chemical you were spraying on it to clean it???

[@HaroldInabinet-h1u]

Just a few words ya show are good great job

[@Ozfishtube]

Awesome solution for crab pots. Impressed!!

[@derrickcordick1315]

Out standing job

[@axeman_hf9147]

Wowwwww that was awesome!!

[@keith1542]

Nice job fellas

[@Krakenflyfishing]

What chemical are you using to clean with?

[@russellhodkinson9855]

It would be alibright

[@navvet4518]

Just curious how much weight was added to this boat?

[@billmacartney201]

The Turtle strikes again👍👍👍

[@Itsyourboytommy56]

Nice stand for the trailer 1:11

[@seatroutking7555]

Great work What did you spray on the hull to clean the aluminium? 👍🏻🇮🇪

[@FishingWithTimmyTurtle]

ali king then coated with nyalic

[@southo69]

What was the before and after weights if you know them ???

[@calebberglund53]

Did you play this whole build out or just wing it as you went? Want to make my 14 footer this cool

[@FishingWithTimmyTurtle]

just winged it as i went. had some idea but just added things along the way

[@SollysOnTheRoad]

Great stuff 👍🍻

[@Wall3ye406]

Nice video. Get a dust mask my friend I've painted cars a long time and it catches up

[@darrencookfishing7961]

Looking good, is it rated to 40hp?

[@FishingWithTimmyTurtle]

rated to 35 but after everything i did would take a 40-60 comfortably i think depending on motor and weight

[@cadwithcorey]

Nice little project. What is that blue spray you cleaned it with . Cheers

[@davbar3834]

Was going to ask the same! Some kind of aluminum stripper?

[@PinkBitzMedia]

It’s a acid, they used it on his big boat aswell in the build of that

[@stevenprice6394]

Just about to finish off my boat.trailer to go☹️

[@deanlavender18780]

turned at soo nice man

[@albzist]

Now, time to go fishing !

[@boydaholic]

Friggin sick. Top job Timmy.

[@roberthonan708]

Legend 👊🏾👍🏽

[@NoelMoore-y8h]

Job. Well done.

[@jackjfjfjf]

How's the lungs feeling brother 🤣 nothing better than a fresh coat keeps the covid away 👌🤙

[@mikeg.2240]

Pretty cool.

[@clintonjohnson8876]

Did the boat have a name?

[@ngahuia86]

Now comes the naming and first maden voyage and fishing expedition.......you gonna smash a bottle of wine on her for the first set sail? 😊😊

[@cetuspa]

The dude has talent

[@michaelbratton3319]

Just a quick note?you really need to get some dust masks/particle masks as galvanised metal is terrible for your lungs?Well done with the renovation 👍?

[@jasonmccoy258]

Nice keg stand

[@Stanspliff69]

Looking to get my 3.75 tinny fitted out like that. Whats the price approx?

[@FishingWithTimmyTurtle]

tinnie was 2500 rims and tires 1500 trailer components 500 ( think i got about 4-500 dollar discount) motor parts 650 george donated about 1500 in ali all up i paid around 7k plus georges donation takes it to around 8.5k think i paid way too much for the tinnie to begin with and dont need expensive rims and tires but wanted them to be the same as the car for offroad adventures

[@Stanspliff69]

@@FishingWithTimmyTurtle legend thanks mate! I just paid 7k for my tinny, tohatsu 20hp. Both 2015 models. Might just do some marine ply lol. Cheers man

[@dylanwilliams3807]

@@Stanspliff69you would be looking at $100+ per hour for labour too if you wanted a shop to do it. Dont know how many hours he put in it over the month but id say it was a lot. That boat would probably cost a lot more than its worth if he was paying for labour.

[@Stanspliff69]

Yeah man it was shmick build. Very nice. I was gonna sell it but pop rivets it is haha​@@dylanwilliams3807

[@GoonLyfeChannel]

Wait a minute was Timmy wearing shoes for some of this vid ... never thought id see that happen

[@JamesJones-cx5pk]

I love the whole rig but she needs a new 4 stroke.👍

[@WhatTheTarnation.]

Well done! Now I know what happens to all those boats that have been sitting derelict, next to the guys barn for the past 20 years. Pick them up for a song-n-dance, and turn those ugly Betty's into a prom queen. ( no disrespect to anyone named Betty or to those dating or married to a Betty. There was no harm intended. ;)

[@marcdwanyne233]

Tiny 🫣😭 dude that’s a big boat compared to my nutshell but I have the same engine 😅

[@haydenwright748]

Need the new donk with the extra weight

[@МихаилЛевеляйнен]

Класс. Это когда руки золотые.

[@user-alexkzn]

Молодцы 👍👍👍

[@bubbadodge07]

What does a rebuild like this cost? Gotta have several hundred hours into it dont you?

[@Ckktopa]

awesome

[@alessandrodelmonte3738]

SUPERRRRRRRRRR 💪💪💪💪

[@russellcameron9035]

We wanna see more bro! Do a go fund me so we can support you direct and then you can do more vids for us

[@pixelpatrick]

Looks great! How long is it? 5m?

[@douger1517]

Um …..it says 4.0 on the side of the boat

[@finlayburton-u7l]

cool 2nd to comment love yah timmy

[@alexandreespindulaferreira3298]

👏🏻👏🏻🙌🏻🙌🏻

[@cameronwaugh7136]

siiiic

[@raeanker3078]

Watching this knowing that you have quit KZbin and your selling the big boat that George built for you is kind of strange , did you build this before you told George, just wondering. Good luck with your next chapter in life mate.

[@Veemack21]

Amazing job!!

[@harambeexpress]

Make sure you put your tag on those pots.

[@Michael-Rusin]

Please name the boat, TinnyTurtle

[@LeandroRepetto-d2f]

Me río cuando hacen todo ese show y no lo tiran al agua porque no sirve jajajaj

[@buckmorgan3775]

Shweeet

[@jackherbert2952]

How blind is ya dog? 😂

[@Deadfeat]

Hate to be that guy, but all the welding , UV and unprotected skin = bad. Also dontpu have a Patrion so we can buy you shoes? Hreat build. Surprised you didn't go for a console.

[@MrBillchair]

God how I hate KZbin ads! Sponsors, fine, no problem, but useless stupid ads? Please, if an ad had ever been of any use to you, please 🙏 let me know!

[@FishingWithTimmyTurtle]

ads are the reason youtubers can make free content for everyone to watch

[@scowy_sg2125]

Just get premium

[@MrBillchair]

@@FishingWithTimmyTurtle yeah I know Timmy, but don't you get kickbacks from ppl on free or premium? Oh, ads for premium may say "no advertisements", but that is only during a video, and then bam! ...about 5 ads! Have you noticed the increase in the number of ads just in the past couple of months on regular KZbin? If I watch the same video wirelessly on my mobile, there are only half the ads! Is KZbin Big Brother looking 👀 at my watching habits? Hmmm 🤔

[@jamesrobertson8941]

the amount of man hours alone in this boat and trailer is not worth it. Unless you sell this boat for 40k it's pointless.