FITTING A NEW 100CC PETROL ENGINE TO MY MTB - MAKING THE CHEAPEST MOTOCROSS BIKE!

[@Fabiobocca]

Id love to see sam put together an old school style edit with street/dirt/park lines using all his different bikes/mods/motorbikes. Would show off lewbs editing skills too. Thumbs up if you wanna see that

[@jakesmith9442]

I’d like to see a break up video, explaining the reasoning why Hope LEFT Sam..was it the epicness, did she leave him for Lewbs?! I need answers

[@RedRadu]

kzbin.info/www/bejne/jIG7lpiljZeId68 '

[@najaneda]

Sam does the editing.

[@joeshaft]

you could do such a collab with colin furze! he could make you some mental bike with a pit bike engine to ride! now THAT would be amazing. Thing is, he's nuts enough himself to ride it too! that would be such a good video if the two of you could come together for a project video!

[@marcoepifani2475]

this is the best idea I've seen in a while

[@alfarosiarsita]

Colin: jet engined mtb

[@deniscabala108]

Sam Pilgrim in 2031: Fitting a 5 liter v8 on my mtb

[@SamPilgrim]

hahaha IMAGINE!!

[@robotbroken]

@@SamPilgrim - I'd love to see you get the motor's power sorted out with some assistance. It seems like a well running motor would be a lot of fun mated to the MTB Drift Trike Thank you Sam and Lewi for putting so much time into making all these videos! You two are definitely spreading happiness to the world with your efforts.

[@mpk33]

@@SamPilgrim Make it happen NOW Pilgs! Blast that Cake outta the water...lol

[@timduncan9745]

Check out Allen millyards 8 litre v10 dodge viper engined motorbike he built..that will take some beating

[@tedtroth3759]

That’s worse than the top gear blender idea!!😅

[@Cody_Hanson]

The enjoyment you get from simple/cheap things is an art form in itself. I really appreciate it. At the same time, I’d love to witness your stoke levels on a KTM 300 out in the proper woods.

[@noexp7710]

No joke I can go pickup junk put in the trash with an engine and have a blast. Kids learn and best cheap entertainment kids could have.

[@jackburston2665]

“Today is going to be epic....because i have a box” 😂

[@5ar673]

yes 🤣🤣

[@cinnamonrole2952]

Ikr ahaha

[@AlejandroTorres-jw4vc]

Since it's Pilgrim... it will be epic even with a box lol

[@DontTalkShitAboutTotal]

'and in this box... is another box'

[@lukas.freeride3738]

Every cat every time

[@hshannon1397]

Thanks for the “To the sky” stickers🤟

[@250ICON]

When did you order? Been waiting almost 2 months for a few sticker packs I ordered.

[@hshannon1397]

@@250ICON I think it was the 24th of this mont and they were dispatched 2 days later and arrived today

[@thecockramchannel]

Normal people: just buy a car Sam pilgrim: meh let’s just fit an engine to a bike

[@250ICON]

@@hshannon1397 wow...I ordered on the 8th of December.

[@RedRadu]

kzbin.info/www/bejne/jIG7lpiljZeId68 ..

[@su1raM]

If there is something good about 2020, it is that I found this channel. Thank you Sam for all of your content that you are making for our eyes ✌️

[@jonathanhough9199]

Welcome to the Yolo lol

[@SamPilgrim]

Thanks, glad you like it!!

[@yourworstnightmare7130]

Just a quick tip for running these peddle bikes. Keep peddling when the engine is engadged it helps the motor to run more efficiently and wont bog nowhere near as much. Also it has a manual choke which you can adjust on the carb/air filter to help with the bogging out aswell. These are great fun and had hours of enjoyment out of them

[@Nye-tc9wz]

he also never let it break in

[@DaleMace-m5i]

❤

[@peterjordan5947]

The screw on the outside is just the idle fuel pin. If you move it out you'll notice the bike stalls even with the clutch disengaged. What you need to do is open the carburetor and replace the main fuel pin. That carburetor comes with a #60 pin as standard, you want a #66 it get more power at the top end. To access the main fuel pin on your carburetor. Unscrew the bottom two screws holding the fuel reservoir and pointing down will be a brass nut. 6mm, unscrew it, that's the main fuel pin. Replace with a #66. Plus those air intakes are known for being rubbish, just drill some more holes in them to get more air flow.

[@ultimateearrapechannel31]

you cun run them without air filter no problem. just take it off

[@PiperDurand]

heres a tip bro when you first build a engine together thats new you have to brake in the engine so it can go faster and smoother but nice vids and i love them keep up the good work bro :)

[@jonbraid2520]

I have a serious Monny addiction again now thanks to Sam .

[@oskarlehmann-waldau4503]

Jon Braid back in the day i was like "Monster Energy is just for Bad ppl and like bodybuilder kyles " now im like cracking a monny every week or so

[@calvindz8805]

Ultra Violet 🤟🏻💜

[@whiphore]

Screw monnies get into the red bulls I hit 2 a day lol

[@chrzanik666]

Its so annoying I cant wheele any bike and Sam can wheele a god damn bed side table😴🙄

[@jonbraid2520]

@@chrzanik666 you need more Monny! And just keep practicing, you'll find the sweet spot, try lowering your seat too.

[@jackhume4532]

Well that looks like a lot of fun Sam, so get it sorted and please have some more fun riding this engined MTB .

[@edrobbins6514]

Sam is just such a great person

[@sixtysecondsofstephens2386]

Wall of death style around the bowl, awesome !! Love to see it running correctly.

[@jacob6077]

eBay, the site of wonders

[@legaltechinnovations1594]

eBay, the site where Dreams are made

[@stamatisenglezos4593]

Hahahah fax

[@matiasm.3124]

911; what's the problem? Karen: there is a punk in a motorbike breaking the stairs..

[@charliedoman6188]

lol

[@George-je1fs]

999 but yea the world revolves around America

[@charliedoman6188]

@@George-je1fs really annoys me when Americans start slagging us of when America wouldnt be a thing if we weren’t around

[@George-je1fs]

@@charliedoman6188 same mate but tbh alot of them are alright. Shit on the pavement wherever u go I suppose

[@kyle12367]

911 response: let him carry on it will be ambulance time soon

[@Alexbeauchesne1]

You should look into a larger sprocket for the back wheel. you would lose a bit of top speed, but would have much more torque in the lower ends, which seems to be needed in this case.

[@Alexbeauchesne1]

Oh and Also, check the air intake to make sure there is no restriction. (there could be a piece of cardboard in there from the factory)

[@johnnybirdman]

What you need to do is put you a new carb on there and a fmf exhaust header

[@dayyou]

Oh man every since that first two stroke video ive been saying you guys need to do it again, but actually tune the damn thing!

[@dayyou]

m8 do a little research on how to tune a two stroke

[@dayyou]

Dont worry though, I dont expect you to be a master at them, I only expect smiles and good times from your channel :)

[@RedRadu]

kzbin.info/www/bejne/jIG7lpiljZeId68 '

[@christianscottsuzuki]

He needs to work on the bike i agree

[@stuartblackman9643]

I see the notification on the top of my screen, then immediately go down stairs and watch the latest sam pilgrim video!

[@SproutyPottedPlant]

Hope it was a Stair Set of Doom

[@Skyler-f7c]

I'm not planning on popping wheelies but I'm glad to see someone do it

[@peterowen2592]

Get the engine done. Defo want to see more of this bike getting shredded.

[@paulwithers9194]

Need a joint video with you and a Colin Furze creation🤪

[@nigelbrownwellington6514]

Shaka hoodie and a safety tie!

[@pindolpindolek9926]

yea

[@ПламенГеоргиев-б9з]

It sounds really rich. Try drilling holes in the. air filter and it should open up

[@delahayenator]

Yep its rich. Just take off the airfilter before drilling holes in it;) if it runs better you could consider drilling holes. However to really solve it is fit a smaller jet in the carburetor. That will really make it run good. Get a couple of sizes. Best is to tune down, try steps smaller. As it is still new I would leave it a bit rich for 5 hours of using it. Or just go lean immediately and see how long it will last 😁

[@taylormursu9559]

Should find out what mixture he's at, im sure he mixed it 32 to one, should be running 40 or 50-1

[@delahayenator]

@@ubajava carb pin screw is only for idle adjustments. Can fiddle a bit with the needle(if it even has one) put the needle lower, but the problem is still a jet that’s a bit too big.

[@delfinsidiropoulos4786]

@@delahayenator yeah he just needs to adjust the needle to the top notch to lean the fuel out and modify the air filter to let it breathe more, I’ve got a 100cc motorised bike myself

[@delahayenator]

@@delfinsidiropoulos4786 for sure worth trying before changing the jet. Set the needle deep like you say. Top notch :)

[@calmanly]

him: "the bike is done" me: it doesn't have pedals

[@newplayer3861]

It also was missing the left grip

[@nikorankinen]

Try adjusting the needle clip on the carb if that doesn't work you need smaller main jet. Also air filter might strict the airflow a little bit too.

[@michaelparry6890]

You're correct the needle is set to rich .the clip on the needle needs moving up 2 leaning out the engine. A plug cheek will tell you what you need to know ...black / oily -to rich . A brown tint is good ..pale- to lean.

[@kevinlovevlog9320]

Samy always says "This is a Dream Mountain bike ride and Today is going to be epic!!!! and dropping....!!! " this pandemic lead me to this youtube channel and it's the most freaking Entertaining ever....?

[@colmbyrne1053]

I've been waiting for this 👍👍👍

[@d3usalpha]

Defo would like to see this bike again working properly 💪💪

[@richardbarratt5557]

I got this motor mate, after the break in period with the right tweaks, they’re ace

[@Logan-me6ym]

Hey mate, i bought this motor a few weeks ago and it runs ok, however the bike doesn't rev high enough to make and serious power. how long was your break in period? and what tweaks did you do to it? Thanks

[@thodoris6226]

@@Logan-me6ym my friend can you tell me how much it cost you because i would like to go and buy one

[@Logan-me6ym]

@@thodoris6226 it was 255 australian dollars (aud) or 135 pounds

[@thodoris6226]

@@Logan-me6ym thanks mate

[@nigelbrownwellington6514]

Agreed! Furze and Pilgrim would be a match made in KZbin heaven!

[@richardpickering2452]

Get a YZ80 2 stroke engine, Now that would be fun :))

[@Will-wv6vd]

Lethal is what it would be

[@Will-wv6vd]

Yes would be perfect i think just enough power for a bit of fun

[@v4skunk739]

@Miłosz Marcinów kek it would snap the frame in half.

[@v4skunk739]

@Joseph Mcgann But he welded up the frame for strength because it would bend or snap. He even added extra metal and strengthened the dropouts. Good bike though.

[@jesseeastwood]

just need a lil carb adjustment, not the air screw thats for setting idle, adjust your jets and take off the damn air filter they work better and doesnt cost enough to matter

[@petergriffin4629]

Hey there Sam, I don know a thing or two about engines. Befor you bother with jetting and the carburator in general you need to get a proper pipe! You need an expansion chamber pipe, like on your Suzuki. Then you should be able to make some power, if the engine is worth something!

[@sbssbs8818]

Yea know what you mean I Got a go kart put a ts250 engine on it, exhaust had no expansion. It run horrible and wouldn't clear, fitted a fmf expansion pipe on it and its running spot on.

[@ryanbrohan600]

Do you guys not release that the second exhaust that he fited on the bike was as expansion power pipe with the muffler cut off the end

[@josaandrepizarrocornejo1017]

Jaja eres grande sam espero sigas teniendo exito e ideas locas que me entretienen jaja un abrazo de chile valparaiso cerro abajo te espera despues de esta pandemia

[@jordanboushy9061]

You know a bike is well-built when Sam cant break it!

[@mercymizo8379]

Sam you are the best MTB rider I have ever seen you the best man damn.

[@EthanAdey]

Might be ‘limiting screws’ on the fuel adjustment screw

[@bikelife_frogz5264]

To the sky 🤟🤟 keep it up sam getting me throw lock down

[@ELECTRICBIKEDIYLIFE]

You probably need to install the drive gear it came with. That smaller gear that you have on the wheel is probably part of what is bogging the motor down. It's too small and it's causing the motor to pull harder than it's rated for. Just a thought. Besides it would be easier to wheelie that way.

[@rickspeight5108]

😂😂😂 so much entertainment on this channel! Love it! Looking forward to seeing the new hopper action!

[@corbzz2180]

Sam, would love to see you build another motorized, the reason its bogging down is because the factory incorrectly jets the carb (also these china engines are pretty shit) , get a jet kit and use a 60-68 see how you go :)

[@mickmuzzmkmz1628]

That was some funny shit!😂 Gotta see this beast at it's full potential though. Unleash the true power!!!

[@thorns8359]

We are waiting for: FITTING A NEW 100cc MOTOR ON TO MY MTBed

[@chucky3000.0]

Would love to see it once sorted!

[@william38.56]

Hi sam bud since it's a new engine there is a break in procedure especially with a two stroke engine most of them you mix 16:1 premix for 2 tanks never going above half throttle for those to tanks then back to 20:1 premix

[@b-ill2195]

That was possibly the most exciting Motor Bike video I've seen on KZbin 👋👋👋

[@maxwanders]

Only Sam would put a 100cc motor on a bike with V-brakes xD

[@samschannel8330]

Fkin love this guy come across him last week can not stop watching

[@Strangelow]

I've been watching videos from turkey beautiful and picturesque canal

[@vindeta360]

Definitely get it tuned up and see if it can make any power!

[@Inshyi]

You should reach step by step to the 1000 cc engine! XD

[@SamPilgrim]

haha yes!!

[@adele-louisegardner297]

@@SamPilgrim on Taylor mackenzies superstock.

[@WordThatKills]

Hello from Russia, Sam! I enjoy your videos so much, always excited to see the notification of a new video! To the skyyyy! 🌥

[@daniellolo6155]

It's alive! Petrol bike Epic 100cc

[@darknox4502]

Engine's suffocating man!! Give it some fresh air!! But still laughing keep it on!

[@stevenbattersby9776]

Sam on the carb there,s 2 screws one is a mixture screw one a idle speed screw it needs the mixture screw turning in to richen the revs will rise then slow it down on the other screw (IDLE)! Boom to the sky you go!! haha

[@Everatti]

It's bogging because it's new and not mixed properly. Don't mix the fuel to oil ratio at 16:1, mix it at 32:1. It'll lean it out and give it more power :)

[@frostenmcfrosty2453]

That engine is small enough to probably run it 40:1 or 50:1

[@Seantubegaming]

@@frostenmcfrosty2453 many of my friends have these engine bike kits, they all say use 32:1 during break in and 40:1 after break in

[@JoshFry-k8k]

You need to break the motor in with 7 fuel tank cycles with a rich fuel mix before changing it to a lean mix

[@petertanis7968]

Who must i watch first😂 sam or matt, its like they uploaded at the same time on purpose

[@higginscharlie5543]

So true

[@lucasb4441]

We want more hopper ramp vids!!🤘🤘

[@itwasagoodday7318]

5:32 in the wheelie is like 0 rpm

[@mtb_aidan4727]

Ready for a shreddie on the new petrol bike

[@REX_YOO]

Legend are watching in 2024😂😂

[@killermagmon5748]

Frrrrr

[@LoganHester-1489]

Me bc I need it

[@killermagmon5748]

@LoganHester-1489 FRRR

[@landonhyde4916]

Yes let's see more and can't wait for the next free bike challenge

[@kpopRC]

these motors are so shit! the cylinder wall coating crumbles and you lose compression. Should run for a few hours. Love these videos.

[@SamPilgrim]

Yeah not gonna use it again haha

[@1988leer]

@@SamPilgrim I'd love to try and stick it on the back of my mobility scooter 🤣🤣🤣

[@dayyou]

i got one that has over 3200 miles on it topping out at 50mph

[@otj.0000]

@@dayyou are they road legal?

[@1988leer]

@@dayyou 😱 that's crazy, dont think the dog would keep up with me then lol

[@JoseHernandez-pb7dy]

Sam new to the channel but content is "SICK" those lil things is all about the lil tweaks gas mix and a somewhat good carb swap carb get it in band!! Messing around with them is fun!!

[@deanharriss2029]

Get someone to tune it sam. Make it rip. 👊

[@ibnukamarudin6663]

Hallo very one,today is going be epic..,🤘🇲🇾🇲🇾🇲🇾

[@Jezdx667]

Uploaded 5 mins ago and 70 comments?! Wow 👏 epic effort Everyone!!

[@Voxify_AU]

with the old exuast take the baffle out, myn was bogging but not as bad so took it out and ran fine

[@SkidM3rks]

The lack of back pressure from the exhaust could be lowering the performance. Also the jets in the carb. The jets are easy to change, you can buy a jet kit and experiment. And the thin fuel tube might be collapsing under vacuum.

[@RoosterTail420]

Sick video Sam! Let's see more of that BEAST haha

[@exploringwithadz9705]

Sam u r a legend! How much did u pay bro! Id luv 1! Deffo get it tweeked and bring it bk 4 a skreddie! 😊

[@MrBrianhorridge]

Oh! You definitely have to tune that thing and shred hard!

[@kyleLin-j9z]

when he was sponspored by monster

[@JohnJohnson-xm2mu]

I think that engines got the Kung flu Sam 😂😂😂 ,it sounds like it’s choked up,so was I after watching you on it ,great fun Sam keep em coming mate👍

[@joelybettz7607]

Would love to see that with out it bogging the whole time

[@sanimunawar]

My day alaways epic after see sam vlog

[@VanekLarson]

Getting famous off of comments day 243, so I can live the dream, live every day like it’s your last🤙

[@jenko9606]

Didn’t you just this on the Matt Jones vid?

[@VanekLarson]

@@jenko9606 yeah I love watching both of them

[@kazpietras5077]

@@jenko9606 I think he’s a a bot

[@Dude-Smellmyhelmet]

@@kazpietras5077 lol. A bot? No

[@beanieboy3738]

@@VanekLarson you comment on ever KZbin channel I watch

[@nicktrbl]

3:19 Ffs why did Sam almost put 'the straw' in his nose ?? hahahah

[@ryanellis7717]

Noticed this to 😂🤦‍♂️

[@nicktrbl]

​@@ryanellis7717 he smiled and act like it didn't happen hahaha

[@kazpietras5077]

This needs fox 40s

[@2strokesforagoodtime157]

Def wanna see more motorized bike videos.great content.try porting and breaking in motor for more power

[@Nobody-Nowhere]

lol, 100cc on a bicycle :) 100cc should turn a bicycle like that into a black hole that would just suck the whole thing in it.

[@jakeford3359]

no its true lol

[@mrbanana7167]

Well, this motor's actually 80cc, but also people have put way larger motors on bicycles lol

[@jakeford3359]

true but i dont understand why they name like that for example my is told to be 80cc but then i measured the bore and stroke and the calculation was 66cc

[@mrbanana7167]

@@jakeford3359 the chinese add in the combustion chamber and smth else too, and other sellers just followed it cause ooga booga more = better

[@josephbariselle3119]

Do it again with a properly set carb, prior to sending. Meeting the mecanic and seeing his magic would be great also. Thank you, i really like your channel guys.

[@rabbitstew5641]

874 views in 2 minutes wow

[@BikerBearMTB]

That would be sick if we could see more of the motor bicycle

[@Alex-V.S]

That engine is 35cc at best. You know how Chinese products are.

[@Octaopscodmobile]

It’s 78.6 cc it’s still not the best😂 I recommend getting a phantom 85 cc motor

[@Yffud1999]

85cc

[@catssuck7239]

A proper 85 cc liquid cooled two-stroke can make 26 hp, the engine he used practically garbage.

[@ReMarkAbleMagic]

The YD100 is actually 80cc

[@bg-zw1kk]

​@@ReMarkAbleMagic that is the yd100

[@jayTmix89]

Get that beast running!! cool Video!!

[@paul-sm3wh]

Just call it the bowl bike bro it’s all it looks good for 💪🏻👍🏻✊🏻

[@TheMatrixcube]

Sam you need an mbk-51 motor or peugeot vogue engine You will love it and they are trouble free ! Perfect for fitying on a bicycle 👌👌👌

[@faultlinegravel]

yes get that beast running prime please!

[@jacobgamble3974]

Ants your man for sorting that out give me a shout

[@chrisgenovese8188]

these little motors are great, but they have a break in period of a couple tanks. ive been running a cheap one of these for nearly 10 years, ripping on trails and roads with zero issues. ya just gotta give them some love first.

[@krishnagamerz3438]

You are the most , likely youtuber for me , keep it up , love you.❤❤❤❤

[@ParallelGamingReality]

Not much for me to say other than thanks for the daily content. Sux when your friends are too busy. Those are your best videos.

[@markhughes7956]

The box of joy, how much fun??🤓🤓🤓🤓😛🤪

[@kulvindarpalsingh9637]

Hey Sam! It would be cool if you could get that engine sorted to perform as good as it can and do a review on which one to buy

[@jerremyvinson6310]

I hope one day you finally find a good engine for this free bike. Love the content just great stuff.

[@tsalesto]

Today is epic, I see Sam using real tools for a change.

[@gripitandripit7957]

Bro great vids I love the motorized bikes and to fix the bike just move the e clip in the carburetor on the needle just try them all and your problem will be fixed