Fitting a Universal Front Lip Chin on my "Bmw F32"

[@Gala_Aslanlari1905]

Have abe?

[@benderas8060]

I installed the same on my F36 and it broke apart on the highway in less than 24hrs. Though I used extra screws...

[@joshuasherwain]

Yes that's the same thing that happened to mines. As soon as I started on the dual carriageway and put my foot down. It was all over the floor. There's a few other options which looks more stable to use on eBay.

[@StreetFighter34]

@@joshuasherwain have you the link? Thank you

[@joshuasherwain]

@@StreetFighter34 , thanks for the comment. Here's a link to one. ￡22.36 29%OFF | Universal 4 Pieces Car Front Bumper Splitter Lip Spoiler Diffuser Protector Guard Cover Trim car styling auto accessories a.aliexpress.com/_BPyVj5

[@StreetFighter34]

@@joshuasherwain and this quality is better then the other one? Thx for the link bro

[@joshuasherwain]

@@StreetFighter34 , anytime. Hope it all goes well. Don't forget to subscriber for future videos if you haven't done so already. Thanks😊

[@bahram2418]

do I have to drill through the bumper too?

[@joshuasherwain]

Yes & No. But to make it extra secure you'll have to.

[@amshgamer9499]

Would this fit toyota estima 2012

[@amshgamer9499]

So is this a yes then

[@joshuasherwain]

It should fit as it's universal. Some of the ones you can order on ebay has Toyota cars with them on.

[@RaoWarriorGaming1194]

Thanks

[@francescocuria6615]

It's good for Alfa Romeo Stelvio?

[@joshuasherwain]

Yes it is. Make sure it's bolted on correctly though

[@RAZARO]

Thanks for the video. I ordered one, I have to install it, do you have a method to do it correctly?

[@joshuasherwain]

Try not to let it stick out as far as I had mines. You may also want to use some longer screws to secure it better.

[@RAZARO]

CUSTOM CAR MODZ Okay thanks you !

[@이라거시]

Did you have to drill holes in your car ?

[@joshuasherwain]

Yes I did. Don't think you can fit it anyother way. Sticking won't work

[@redpillproductionscanada5563]

New title : how to strip cheap Ebay screws...

[@seebxx]

Can you make the splitter stick out less. And does it hold on firm

[@joshuasherwain]

Yes you can make it stick out less. And use all four blocks for extra security plus some longer screws etc.

[@cleanncrispcutz6027]

Did you order this off wish?

[@joshuasherwain]

No, it was actually from eBay.

[@garydeandeery]

Nice one Iv just ordered this same one to try fit in my rx8. If don’t fit then I’ll put it on my 120d

[@joshuasherwain]

Don't let it stick out to much. The down force will kill it. Use extra screw as well for more security. 👍

[@daniel-su4hw]

I have an rx8 as well I wanted to order one, let me know how.it fits on yours

[@garydeandeery]

Mine fitted fine

[@daniel-su4hw]

@@garydeandeery got any pics anywhere?

[@garydeandeery]

kzbin.info/www/bejne/g5nJqpiGfJt2ipI

[@ThePixelsony]

This fragile piece just for show, if you stick it out too far it will generate a lot of downforce which beyond its designation, it will shatter to the ground when you go 0-60...

[@joshuasherwain]

Yes you sure right. Its not ideal for high speed driving. But if you keep it in and not out to far it should hold better with some longer screw as well.

[@raymondkhan2709]

Do you mean something hit it and down force also caused it to break apart? I bought one of these and plan on using 3m tape and the included screws to hold it on... Thoughts

[@ezequielmedinasantana6050]

Buenas tardes Tengo un Bmw E60 530i 2006 Y ando buscando ese bomper E60 M4

[@cameeiwebb935]

Great video ☺️☺️ the screw was put in the wrong way .. those 2 visible screws supposed to be volt into the car like how u did the end screws ☺️☺️ maybe use longer screw with bolt to hold it in place better ☺️🤞 i order mines for my chevy malibu &&- would install with better screw hardware for secure fitting 😊😊

[@joshuasherwain]

Thanks for the comments. Mines was mainly for demonstration purposes. But very true with what you are saying🙂👍. Hope your installations goes well.

[@stevengreenley1649]

That’s the ugliest splitter I’ve seen yet. I’m just about to fit mine - I’m hoping it goes better than this

[@joshuasherwain]

Lol 😂. Yes, I hope you fit yours better. That's all old now, though. The car is looking much better. If you're on Instagram check it out: @Y3SPN

[@paulhalliday673]

Sorry to say that the front splitter looks RUBBISH

[@joshuasherwain]

It was just a trial. Thanks for the comment 👍 😊

[@kennyhumphries100]

what a terrible design lol... big ugly bolts visable holding it together... why not just a one piece? also a splitter is fitted via the exsisting bolts on the under side of the bumper. you need to take the bumper off. dont drill holes in the car mate..

[@joshuasherwain]

It was just for demonstration purposes. But I don't have since fitted the standard m performance front splitter I had on before just didn't remember to record a video for that one with the correct fitting process.

[@jesusloveyou9523]

Naaa g take it off lol

[@joshuasherwain]

Lol. Don't worry it was just a trial. It's gone.😅

[@garydeandeery]

I can show you there tag me

[@djrio1987]

too far out no wonder why your first one came off leave it too guys who know what they doing

[@krislaupua4658]

Expensive luxury car with a cheap Chinese made bumper lip 😂😂

[@joshuasherwain]

Just an experiment😅. It has the normal msport front lip now.

[@darkfaderproductions8223]

Is all fucked up lol

[@Beksa_xd]

ja pierdole zero pojecia

[@mrpullafastone]

Tbh, doesn't look too great. Sorry

[@joshuasherwain]

It was a trial and error. But fitted the original one. 🙂

[@derekbrennan3712]

Bad idéal fitted by a pair of clowns

[@joshuasherwain]

Thanks for comment much appreciated👍

[@hediparifi8749]

🤔🤔👎👎