In this video I show how I set out and finish a gable wall in timber, feather edge boards, and how I get them behind the previously fitted barge boards.
Пікірлер: 92
@ooslum6 ай бұрын
Love people that make their life difficult due to pride in their workmanship, even though it often goes unnoticed, cheers.
@thetallcarpenter6 ай бұрын
Thanks for your comment 🤩 and quite a lot of what I do get covered up, but I still like to do the best job I can👍Cheers Del
@patrickstuart82116 ай бұрын
Try this tip. Make a story stick for 150 course gauge place bottom on the bottom row starting point and move the story stick until a gauge mark hits the preferred top position ie window head position as you have chosen Now unless the dimension is divisible by 150 the gauge will be angled off plumb so you mark off all gauges from the story stick and clad from them. Negates the need for any arithmetic and gives you the chance to see where the cladding will fall around other openings and obstacles.
@thetallcarpenter6 ай бұрын
Great comment Patrick👊Thanks for watching 😎 Cheers Del
@garyc49436 ай бұрын
Pertect timing, I'm about to start this on my new workshop. Can't beat the tips and advice Del, making my life easier 🎉
@thetallcarpenter6 ай бұрын
Hi Gary🖐Glad you find my videos helpful👊and good luck with your workshop😎Cheers
@michaelplays24496 ай бұрын
Lovely work Del !!! You make ir look so easy , but all the Top crafts people like yourself always do ,,,,,,,,,,,,Gifted !! Great video !!! thank you 🙂🙂🙂🙂🙂
@thetallcarpenter6 ай бұрын
I guess it should come fairly easy to me Michael, given how many times I've done it😆Thanks as always bud🤗
@johnwaby43216 ай бұрын
A good bit of forward thinking there del .👍 Made fitting those boards a lot easier. . Yes keep an eye on the gauge as you can soon run out a lot 👍👍👍
@thetallcarpenter5 ай бұрын
Hi John🤗So glad I did this, as it will be a breeze to finish now, all from the ground👊Thanks for watching 😎 Cheers
@ironpirate86 ай бұрын
Good tips, thank you!
@thetallcarpenter6 ай бұрын
My pleasure IP👍Cheers Del
@robevs100ok6 ай бұрын
use the gauge rod to mark the 2x1 and inbetween pitches cut two angles at 500mm place in position then measure inbetween then calc the diminishing measurement , save you loads of time.
@thetallcarpenter6 ай бұрын
Great tip👌I get exactly what you mean😎 Cheers Del
@davetaylor47416 ай бұрын
Pretty much how I was taught. You can be even more pedantic, and see if it works full board under, full board over. On the windows. Not always possible. But big enough windows. Can be done. I also make up batten T's for my gauge. Hooked under last board. Pinned on. Next board sits on top. Don't have to hold it up. Joys of working on your own. The other thing to mention is, nail just above the feather of the board below. This allows board movement. And makes repairs later, easier. Hate it when you come to take a board out, and someone has nailed through the feather. Neat and precise as ever. Good job.
@thetallcarpenter6 ай бұрын
Hi Dave🖐Another great comment with loads of handy tips👌Thanks for watching bud 😎 Cheers Del
@philwilson87976 ай бұрын
Morning Del It’s amazing what 25years+ experience has it’s a absolute pleasure watching you and taking tips away after watching you, one question what make is your gazebo please 👍🏻
@thetallcarpenter6 ай бұрын
Hi Phil🖐Thanks for your very kind words🤗and my gazebo is from here.surfturf.co.uk/shop/shelters/robusta/4-5m-x-3m-6/ Cheers Del
@arthuranderson77416 ай бұрын
Nice piece of work...good insight to setting out and measuring the boards...
@thetallcarpenter6 ай бұрын
Cheers Arthur🤗and thanks for watching 😎
@Nagantfan7626 ай бұрын
I like to lay out a story pole(gauge rod) for my beveled siding also, but we have always layed it out to the top of our siding and snapped lines all the way up the wall for every course.
@thetallcarpenter6 ай бұрын
Hi there🖐Snapping every course is definitely a great way to stay on gauge👊Thanks for watching 😎 Cheers Del
@David.R.H6 ай бұрын
Easy when you know how. Thanks for sharing 👍
@thetallcarpenter6 ай бұрын
You're right there David👊Cheers Del
@Joe-jv5mm4 ай бұрын
Thanks fot the Tips and Hints, some thought goes into planing the layout 👍
@thetallcarpenter4 ай бұрын
Cheers Joe😎It all looked sweet when it was finished ✅️ Thanks for watching 😎
@LTWCarpentry6 ай бұрын
Great job del, only thing I do differently is I make two gauging blocks out of batten then I can screw one on one end allowing me to hook one end on then use the other gauge block at the other end, just makes it a little easier when working on your own. Hope that makes sense 😂
@thetallcarpenter6 ай бұрын
Makes perfect sense Lewis👍I tend to just hold a pin up the side of my block and hammer it in for one end, and then like you, use the block the other😎Thanks for watching bud🫡
@SteveAndAlexBuild6 ай бұрын
Nice job with some great tis as always 🤜🏽🤛🏽🧱👍🏽
@thetallcarpenter6 ай бұрын
Cheers Steve🤗
@jonbarrie70026 ай бұрын
Great work Del! Thats what makes the difference between good and ok. Thinking steps ahead to produce great work. If you're doing stud work next, it would be good to see how you set out your corner details at junctions for meeting walls and door frames etc so the plasterboard has a good fixing point. Great video as always. Thanks for taking the time to make them.
@thetallcarpenter6 ай бұрын
Hi John🖐Appreciate your comment bud and I'll see if I get time to video some of the stud details🤞Cheers Del
@Pokemongold886 ай бұрын
Nice job TC 👍
@thetallcarpenter6 ай бұрын
Appreciate you watching and thanks for your comment 🤩Cheers Del
@cabottaxi6 ай бұрын
Looks great mate . Will use this video when cladding a new build workshop shed.
@thetallcarpenter6 ай бұрын
Glad you found it useful bud👊Thanks for watching 😎 Cheers
@paddy1206 ай бұрын
Quality work 👍
@thetallcarpenter6 ай бұрын
Thanks Paddy🤩
@johnmorrissey16756 ай бұрын
👍 very well layed out Del ☘️🇮🇪👋
@thetallcarpenter6 ай бұрын
It's all in the planning John👍Hope you are well🤞and thanks for watching🤩
@briangibbons89246 ай бұрын
First class Del..
@thetallcarpenter6 ай бұрын
Thanks for watching Brian 😎 Cheers
@jofasable6 ай бұрын
Thank you for your time.
@thetallcarpenter6 ай бұрын
My pleasure bud🫡and thanks for watching 😎 Cheers Del
@clinteastwood36846 ай бұрын
Nice job Del
@thetallcarpenter6 ай бұрын
Thanks for watching bud🤩Cheers Del
@peterwalton15026 ай бұрын
Excellent video. Useful instruction 👏👍
@thetallcarpenter6 ай бұрын
Cheers Peter🤩
@lobbylobbster6 ай бұрын
Top work Del…as always!
@thetallcarpenter6 ай бұрын
Cheers LL🤩
@fardastevie28276 ай бұрын
great job as always dell top man
@thetallcarpenter6 ай бұрын
Thank you Steve🤩
@philipwilliams81146 ай бұрын
Proper pro. Top man Del 👍
@thetallcarpenter6 ай бұрын
Thanks for your kind comment Philip 😎 Cheers Del
@miserablesod16 ай бұрын
Great stuff Del 👊🏻
@thetallcarpenter6 ай бұрын
Cheers🫡Thanks for watching 😎
@GB-mu9ue29 күн бұрын
“I’ve run out of screws” lmfao
@thetallcarpenter29 күн бұрын
It happens to the best of us🤠Cheers Del
@garvielloken39295 ай бұрын
🤩
@thetallcarpenter4 ай бұрын
😎👍
@LeeTillbury6 ай бұрын
Great job Del, legend. I noticed you are back on the Paslode, did the Fischer gun not meet expectations?
@thetallcarpenter6 ай бұрын
Hi Lee🖐The Fisher is a great, reliable gun, but just not agile enough for me when nailing into tighter corners🤔Still part of the tool kit though for use on big flooring/ply decking job's👊Cheers Del
@adriandotsmall2 ай бұрын
👍
@thetallcarpenterАй бұрын
Thanks Adrian 😎
@alistaircameron32376 ай бұрын
👏🏻👏🏻👏🏻👏🏻
@thetallcarpenter6 ай бұрын
Thanks for watching Alistair 😎
@jamiehalpin99216 ай бұрын
Lovely work as always. Bit of deflection in that lintel! Cheers.
@thetallcarpenter6 ай бұрын
Hi Jamie🖐I didn't know they made lintels that big🤯It's 4.6m long and has the weight of the roof on it😬I would normally have expected to see a steel beam in there🤔Thanks for watching 😎 Cheers Del
@jamiehalpin99216 ай бұрын
Thanks for replying, yes same thoughts as I had, usually a beam. Can I ask what the cladding you are using is? Thanks.
@thetallcarpenter6 ай бұрын
@jamiehalpin9921 It's simple, re-sawn feather edge boarding. Most building suppliers stock it. It's about 180mm wide and 18mm at its 'bottom' edge, and about 6mm at its 'top' edge👍
@Pete.Ty16 ай бұрын
👍👍👍. Thanks Del
@thetallcarpenter6 ай бұрын
My pleasure bud🫡and thanks for watching 😎
@barryford71356 ай бұрын
Nice one Del, looks a bit chilly? 🚴👍
@thetallcarpenter6 ай бұрын
It was more blustery Barry 😬Thanks for watching bud 😎
@towns846 ай бұрын
Thanks for the video, I've got some cladding to do on my house, so good timing! What size nails are you using?
@thetallcarpenter6 ай бұрын
Hi there🖐I used 63mm nails because that what I had, but 50mm would he fine👍Cheers Del
@peefor1356 ай бұрын
Very good insight. You mentioned briefly the mesh at the bottom to keep beasties out, but allow air through. What do you normally use? There was no mention of anything at the top. As there is no traditional soffit as such, is nothing necessary there?
@thetallcarpenter6 ай бұрын
Hi Peefor🖐At the top we used to fit the boards tight to a 'soffit' peice up behind the barge, but the reality of it is, that the boards shrink and shorten to such a degree that holes open up enough for insects to get in anyway😬 The screen at the bottom is more to stop rodents and, obviously let in airflow👍(and keep the BCO happy) Thanks for watching 😎 Cheers Del
@amazing4516 ай бұрын
Hi Del, nice to see you again, the 1880mm figure you used was that the measurement you levelled around from the door opening upto the back of your barge board ?
@thetallcarpenter6 ай бұрын
Hi Kevin🖐The 1880mm was from where the full board would go across the door opening, down to FIRST course where the brickwork ends and the blockwork starts👍Thanks for watching 😎
@amazing4516 ай бұрын
@@thetallcarpenter Thanks for that Del, as it happened I had began to type that in first but I was thinking that would be to small for the ceiling height but it shows I was wrong.
@jimmysalford84154 ай бұрын
I’m in Australia and we use “Cladmate” is it not available in the UK yet? It makes any sort of cladding like that so much faster, especially if like me you are often working on your own.
@thetallcarpenter4 ай бұрын
Hi there🖐Yes, I have seen the Cladmate gauges and they look really handy😎I don't do enough to warrant getting a set though😶Thanks for watching 😎 Cheers Del
@JACKATTACKED6 ай бұрын
👍👌
@thetallcarpenter6 ай бұрын
Cheers fella🫡
@pauljackson54826 ай бұрын
Oooohhhhh i feel your knee pain. 😮
@thetallcarpenter6 ай бұрын
Yes Paul🤔not the best way to start a week off😬Thanks for watching bud 😎 Cheers Del
@darkviper626 ай бұрын
How you find that tracer pencil I got one lost it.? Life ended had to buy an other one.
@thetallcarpenter6 ай бұрын
Hi Dez🖐It's actually a Pica pencil, and it's MILES better than the Tracer one I had👊Cheers bud.