Using Cut & Butt to repair small holes

[@aarontrotter5188]

I inherited a 1948 Chevy fleetline with quite a bit of rust. So glad I found this channel. It’s like taking a college course in rust repair!

[@justme8340]

Due to this channel and Louis Sauzedde’s Tips From A Shipwright, I may have to have my name legally changed to “Supervisor” because I’ve grown too accustomed to watching others working while I sit on my butt.

[@Kryten428]

Work fascinates me, I can sit and watch it for hours. 😄

[@grantr5417]

Join our procrastinators club. Should be up and running soon 😅

[@darrellbedford4857]

​@@Kryten428 watch it for hours, I can sleep beside work for days.

[@alexb3670]

​@@Kryten428 ll a Pq😊

[@centralbears3010]

I have watched you a million times. I learn something every time and it never gets old. I'm about 20 minutes away from being the smartest man alive.

[@1961Bullet]

What’s true on Kelly’s Island is a pipe dream on Vancouver Island.

[@vicferrari9380]

Tony can get more done in twenty minutes while playing with spot than can any mortal .😅

[@goptools]

Hi Tony. Love seeing the cut and butt repairs. Such a nice way of making a tight fitting patch. I think using the thinest cut off wheels you can find really helps too. Thanks for the video!

[@number1trucker]

What a brilliant way to demonstrate how heat gathers in the corners. I didn't understand what you were talking about until you put that disk against the panel. "The tips were good" as always.

[@tonydevich7937]

It's a breath of fresh air to see someone who just gets things done without so much complications, im sure you had influence by some nice people in life, wish you much success!

[@Monaco-BuilditFixitDriveitEver]

I like you walking around and turning things on. It’s cool and different.

[@jakeowens1770]

Cool but also good safety tips

[@Monaco-BuilditFixitDriveitEver]

@@jakeowens1770 ….like don’t look into the light, and you should wear a helmet. :) Been watching him for a while now and did some work on my car based largely on Fitzee’s teachings. I really do like his stuff.

[@nlynch55]

You gave a very good explanation of working with corners on patches. Now i don’t have to try to make circles every time 👍

[@nigelbeaumont1109]

You are a Magician with Metal. Great job.

[@lestergreen7262]

Loved your vintage slide hammer. Knew plenty of old bodymen that had similar ones in their tool box.

[@168charger]

You are definitely an artist with sheet metal and welding. I'm new to welding. Great vids!

[@BrucePierson]

Some very useful tips there again, particularly with making the patch larger than the rusted area, so as to get back to good metal.

[@minnesotatomcat]

I’ve used the covers from gas bottles many times too for shaping and getting curves into something, they’re just perfect, nothing else has that shape 👍

[@charlesparr1611]

Get an old tree stump, a real old big bugger a couple feet in diameter and the same length as you would set the top of an anvil, and then, using convex faced hammers, pound depressions of varying shapes, differing radiii spherical sections. You can pound the metal against the wood and form very smooth curves, its a large part of how medieval armour was made. Making big heavy sledgehammers with lightly domed faces (and no square edge that would put a crease in the metal) will help a lot, and you can quickly learn to make very very pronounced shapes from single pieces of steel. Together with domed and curved stakes (like the gas bottle safety cap for example) to planish the metal from the other side and you can (if you take the time and refine the hammer surface to avoid marring the metal) mirror smooth metal domes and curves, mirror for real: polish them and you can shave in them... Or you can use the same techniques for a tenth the time and get something that with sanding and filling can be made perfect for paint. Source: I used to make armour out of 12-20 ga steel with not much more than hammers, a tree stump, an old axle with a carefully shaped head, and some snips. Back then I had no idea how to weld, sometimes I would rivet things, but mostly everything was formed from flat sheet. Later on I started reading about panel beaters, and found out about power hammers and bead rollers and English wheels, but still, most of it is doable with a well shaped stump, a stake or two, and some good hammers.

[@bartsarton2212]

@@charlesparr1611 Thanks for the info. You sound like a real craftsman.

[@charlesparr1611]

@@bartsarton2212 No more than passable, but I did learn what I can do from a remarkable craftsman. Years and years ago, back in my 20s. Look up a sculptor named Jeff De Boer, he has done a lot of work in different forms, but he has always had a thing for armour as a metaphor, and he started out building it. Still does among other work, its something he comes back to a lot., and it's very worthwhile to see his stuff... Some of it is abstract, but he's also famous for making incredibly intricate suits of armour for cats and mice... And it's 'real', like wearable, functional, made from steel and leather and such.... I have enormous respect for what fit zee does, in his own area, but the stuff this guy does is otherworldly. I really ought to go visit him, Covid has kept me at home for a while.

[@thomaswhite3831]

Awesome job Fitzee , as usual .Your videos are gold, for someone like me, thank you !

[@royestala6944]

I love rewatching your videos!!

[@patriotdiz4846]

your rust repair around windshields video helped me doing it really well on my coronet.

[@deanm4138]

Very cool watching the process Nice to see Wendy’s mustang back out of storage, and the vista cruiser hood 👍

[@ginfizz20]

Glad you got out a new video. I've been haveing to watch some 2 yr old videos of yours.

[@TheObSeRvErTheObSeRv]

Nice work Fitzee. All the very best from Melbourne Australia.

[@Mattisgarage]

Thanks for corner tip. I've done this many many years and never thought that.

[@wayneforbes7671]

It's got to be right, it's cat certified! Keep 'em comin' Tony. Always great content.

[@ttomthumb]

Another good one Tony. Thanks for taking the time to share.

[@geoffreymills9932]

Nice work again Tony, saving classic cars one patch at a time,, I love it

[@karlscribner7436]

Been away a bit, good to pick up on your tips. Great example of your technique

[@johngersna3263]

Tony, the tips are always great and I'll be incorporating a lot of what you've shown in this video in the front fenders on my "63" Ford Falcon. I will definitely be refering back to this video in the future. God bless. 👍

[@leonardgilbreath9004]

Nice fitment on these and always enjoy watching your videos on how to do it you give great advice thumbs up 👍👍👍👍👍

[@starrpuruto588]

thanks Fitzee im learning so much from your videos,thanks for keeping it simple,and for being so humble,im gaining knowledge,skills to fix the bodywork on my 1981 XD (Aust)Ford falcon.awesome channel.

[@LandsharkGarage]

Awesome I always pick up tips when I watch your content thank you!

[@jonjones1290]

Thanks Tony. Yet another excellent video with tips and hints 👌

[@scratch187]

New subscriber here! Appreciate the video so much that I am subscribed now. Self taught on welding - just started learning about a year ago via these wonderful KZbin videos! Cut & Butt is amazing to see in action - now I got to try this technique, as I definitely could have used this working on my 79 Cadillac (areas under trim - big holes). Now I gotta look at all the older videos - sure to find some more tips/tricks.

[@YootubeUK]

Good to see the work passes cat inspection! What I like about your channel compared to others is not only the down to earth approach but the camera work is good. Some channels the camera is way too far away to be of any use. I'll be using the "Fitzy-Cut-&-Butt" on my next Honda project.

[@monadking2761]

Hi Tony, You bring back memories of what I remembered it being called spot glaze (red liquor putty). Now thats why the body work cracked over time. You mentiond you use CO for gas and the .023 for wire. I started using the the .023 after listening to you and you were very right with control of the weld on the sheet metal but I found out the CO/argon mix works better on the welds. Have you ever tried it and wonder is it worth it cost wise? Nice job on the quarters, BTW. I know too many car guys that also put in S.S. brake lines on the car that never drive the cars in the rain only to and from shows in nice weather but worry they might rust up if the use steel lines. Good point about the paint on the inside.

[@charlescarter9333]

I find your videos very informative explaining the cut-N-butt. I will be trying it soon on my 1973 Dart Swinger lower quarter panels.

[@bryancooper2699]

Awesome work. The tips were good. I did my first cut and butt last week . It turned out great. Thanks for the lessons

[@lawncuttingplusdelta]

23 minutes , finally someone explains that a car is never rust free !!!… so many know it all trolls insist on ridiculous treatments inside panels when there are nooks and cranny’s inevitably surface rusty …. a car worth restoring is not gonna driven in rain and snow

[@herbslusher4409]

Great work Tony. My Dad was a fabricator. A lot you teach reminds me of him.

[@africadreamin]

Another great lesson on bodywork gives me the push to repair a bulkhead that if successful will save me a heap of money.

[@jorgefernandez-mv8hu]

Thanks for the tips. Those fenders came out great.

[@harrytaylor6854]

Great video sir Tony good tips great job done on the fenders. Again well done thank you sir Tony

[@EarlyIronAddict427]

Thx for the good tips ! I’ve used this cut and butt method and love that you have thought me that. I wear my cut and butt T shirt and ppl look at it and look at it again lol. I think they are seeing something that is not there. Hahhaa. Thx for the good tips and lessons 👍🏻✌🏻

[@stephanusjohanneshough2646]

As always very good tips and very helpful Tony.❤

[@rescuedandrestoredgarage]

Such incredible work, brother. So much information about all this kinda work ty so much. Love it all. I feel like a sponge, lol.

[@lucbrown8052]

Another great-one Tony! I'm actually using your cut-n-butt technique on my car right now. Getting there, not as neat as yours of course. Beginner.

[@gordonstarship]

Excellent tutorial on rust repair. I always learn from these videos.

[@allenhess6583]

Thank you for an excellent video. Great narration and video. You had a lot of information in a short space. Greetings from Maine.

[@guillermonieri4203]

As always, great lesson. Thank you.

[@thyubernoob]

Living in Metro Detroit my whole life and love old cars, them fenders are totally rust free! 😉

[@jagnuts1]

Excellent, this kind of post helps me so much when I am out doing my car work.

[@jraposo911]

Gotta use this method on some 70 GTO fenders! Thanks Tony ! JR in Ontario😊

[@frankgaletzka8477]

Hello Toni Thank you for the video. Your tips were very good. I wish you a good week and all the best. Yours Frank Galetzka

[@dinxsy8069]

Made a corner structure out of 3 pieces just recently, prior to watching you Fitzee my stubborn self would have tried to make it out of one piece taking hours and a lot of effing & blinding.

[@Anthony-nw5zv]

The tips are always good Tony 😊

[@ferbong]

Eeeeehhhh!!! Hi from Argentina!!! Thanks for your amazing video. I'm restoring a very Rusty 1977 Ford F100 AND your videos help me

[@johnkranz4004]

Very nice job Tony I remember that Red led Poody But never use it like you explain how people use it

[@JimmyMakingitwork]

Nice work, fender looks top notch!

[@OldJoe212]

This is a really good video for your new students and an excellent review for you older students.

[@ltform]

Cut and Butt, wow, I have been wasting so much time trying trim the perfect patch. Not anymore, thx for the great video.

[@davidwood1923]

You're the King! .. Thanks Again for the Great Work

[@dwaynelejeune3508]

Was just thinking about corners. Thanks for explaining the technique

[@NeonAstralOfficial]

Master class brother, people should be paying money just to see you work, amazing quality standard and craftrmanship

[@michaelvandenhoy1021]

Yes I remember back in the day using a piece of brass as backing when welding those small holes. This brings back early days of auto body shop classes. Back in the day our instructor was a mud slinger, he would lap weld metal in than hammer down and cover with mud ( auto body filler). Back ther didn't know anything about cut n but. Thanks for education.

[@markt9438]

Hey First time i have ever seen this cut and Buff ! Like it a lot ! Have many issues with door and body to use on ! TYVM

[@danielcampbell6146]

Your tips are always good fitz thanks mate.

[@budatkinson3396]

I wish I knew half of what you know Fittsee love to work with you keep up the video love them all

[@tonyshepherd39]

Love you brother ! You excite me amazed every time ! And I grew up with a junkyard . People like you make me happy !😊 So proud of you keep on doing what you're doing and educating !

[@kfchickenbucket3080]

awesome video as per usual mr fitz!

[@davepeeters6518]

Thanks again for taking the time to explain your process

[@CFBtechnologies]

Sir, you are a master artist!

[@bradley-cfudge1914]

Not as much fun as watching Crusty develop, but as always, interesting and very informative. Keep up the amazing work !

[@charlesparr1611]

Recently I was watching a crusty video and was struck by how beautifully designed the area around the grill and headlight was on that car. Quite stunning, especially watching it get remade during the video, and realizing that we were not going lose those perfect lines. Even nondescript old econoboxes back then had something special in their metal that just doesn't seem to come with plastic.

[@bradley-cfudge1914]

@@charlesparr1611 I am a fan of old Toyotas any way. I never thought much of them, then I was given a 1981 4x4, amazing engineering, not found on anything else. Now I have had 7 and am currently restoring 2 more. Nothing as nice as Crusty, but still good for 500,000 miles.

[@donaldhalls2189]

Dam good job thanks for sharing, all the best to you and your loved ones

[@robertthrem3382]

I watch a lot of welding . I learned a lot from you thanks❤

[@rgd2598]

What a beautiful cat!! Looks like you've been replacing panels on it from different cats....lol

[@kcrussell25]

A great video as ever thank you. Just an observation rather than a complaint but I've watched this in 2 parts. I must've had at least 6 adverts. Maybe that's because I broke in the middle but that feels like a lot. I don't mind as I've been here a long time and happy that it supports you/the channel. If this was my first time here that would be off putting. Just an observation and I'm already looking forward to the next one😁

[@larrybrown7216]

thanks Fitz ! GREAT TIPS

[@rogerphillips450]

Always worth watching may thanks.

[@stantilton2191]

Inspiring work as always, thank you.

[@61spindrift]

Sorry got to add yet another comment. After finishing video and listening to you I have to say my past comments were unnecessary. Because you admit and are open about doing the work quick and that even the best out there use filler. Ok, so ya, good video and everything.

[@Macbetula-yl8wq]

Another excellent video.👍

[@robbigemon1868]

Great video tony thanks

[@Teds455]

Thanks again! Trying to get up the nerve to cut and butt!

[@maddpeanut6313]

Nicely done. Another Fitzee viddy in my collection.

[@ericcrawford326]

Pink putty. I remember that stuff. Used it once and the paint job looked great for about a month. Then the DA marks showed up where it shrank.

[@Barry.ONeill]

Great Video Fitzee 👌🤙💯 first time in a while youtube sugested your new video to me usually i have to go to my subscription tab 🤙

[@nicksnarski5973]

Great tips as always.

[@Macbetula-yl8wq]

Your work is excellent 👍

[@mattthescrapwhisperer]

Ah, the Cut & Butt. Great technique!

[@Kryten428]

Fitzee in Newfoundland, Make It Kustom in Maple Ridge BC, and Half Ass Customs in the middle in Steinbach MB. I never realized we had fabrication talent to cover the breadth of the country.

[@billmiller7138]

Nitro-Stan, red lacquer based putty. That was the trick, thin it and spray it on. High build primer before there was high build primer. Way too thick on that fender though.

[@brittneykappes7952]

I have had to do these repairs on 3 sets of fenders so far all done because i watched fitzees videos

[@RandallSoong-pp7ih]

Thank you Fitzee!!

[@johnalexander4356]

Great tips! When I was a kid they taught us with the slide hammer and pink fillers. I think that's why I didn't enjoy it. It looked like you got some bad mig wire or worn out drive rollers. You sure seemed to be fighting the welder issues anyway.

[@fitzeesfabrications]

Cheap welding tips. Couldn't find any 023 Miller tips at my local welding store. These tips are from princess auto.

[@mikescudder4621]

Good one Fitzee. Cheers mate.

[@chrisprice4420]

Great tutorial!

[@oldgeezer3269]

Nice work Fitzee 👌👌

[@donprice9050]

I've been looking for an old car to drive when I retire next month. I will now take, "Rust free" with a big grain of salt!

[@irongoatrocky2343]

Tony your Slide hammer is a mere toy!....... You should see the one Vehcor uses on his channel to partly straighten a Rad Support to get an RDX hood opened! 🤣🤣

[@MuscleCarMadnessGarage]

I feel as though I'm in a classroom. Appreciate it!

[@Paulholio69]

Thanks for the lesson

[@roughboygarage1475]

I miss the old intro music. Great video!

[@Adscam]

I like the tree quarter cut & butt