Fix a Loose Hinge in 60 Secs!

Рет қаралды 60,003

MrFixItDIY

Күн бұрын

Пікірлер: 27

@darinhampel4149 Жыл бұрын

I like the dowel idea. Get yourself a self centering drill bit, it'll make your screws look a lot better.

@kasunovinfinity Жыл бұрын

Just went to buy what I needed to fix my door with this exact problem. Thank you, it's been annoying.

@wisdomsquare28 Ай бұрын

Much gratitude for SHARING info!

@1notgilty 4 ай бұрын

Great tip. Thanks!

@BryanRettinger 11 ай бұрын

Worked perfect. Thanks!!!

@ToolsWithAdrius Жыл бұрын

Loving all of the new content lately!

@Sharky142 2 ай бұрын

How well will this work on a hollow door?

@KEVINSURIEL 4 ай бұрын

Can you use wood filler

@bobbyruggs808 Ай бұрын

What about on a hollow bifold door that may not have a solid structure surrounding the dowel?

@droptop281 4 ай бұрын

Or use wooden toothpicks and wood glue

@dailydoseofvines1295 2 ай бұрын

What if the door is cracked from the middle

@budlightgirly057 Жыл бұрын

Or just put in a longer screw

@kasunovinfinity Жыл бұрын

Tried this, didn't work.

@weller1016 11 ай бұрын

It won't work because the door is hollow

@XxxXxx-br7eq 7 ай бұрын

It doesn't work because the very end is still loose and still ends up causing problems you need a solid base to screw back into

@nikobellic4145 3 ай бұрын

Won’t work because the screw goes past the wood into the drywall

@dannyotero8690 8 ай бұрын

60 seconds for all this?

@reactionred2633 11 ай бұрын

How long do you wait for the glue?

@rubend9391 5 ай бұрын

It's been 5 months, glue should be dry by now.

@matthewhall9692 18 күн бұрын

@@rubend9391 lol

@Papyrius 3 ай бұрын

It’s probably stronger after you fixed it 😂

@IsaacConejo 5 ай бұрын

Bro you left the paint that caused the issue in the first place there...*but I do like this a lot

@wonaplea08 5 ай бұрын

How did the paint cause the issue? I’m genuinely comfused

@IsaacConejo 5 ай бұрын

@@wonaplea08 when you brush on paint too thick. Then you remove your hinges because that's what you should do but then paint where the hinges go instead of cover them which is what you shouldn't do . Unless you remove the paint It will act as a spacer. Usually causing leverage stresses where they shouldn't be on a door.