Fix a turn signal switch no cancel issue for Nissan and probably other makes

Turn signal won't cancel after turning, it might be this simple issue and a fix for Nissan Pathfinder, Sentra, Frontier and any other vehicle with a similiar type of switch. Have a look and if your car or truck has a mechanism like this, give it a try.

[@ianmartin7312]

Thank you. This no-cost repair fixed a really dangerous problem with my 2010 Qashqai Tekna. I could not cancel my left indicator at all, which upset a lot of other motorists! 🙂 Total repair time was about 15 minutes, plus the waiting time for the epoxy to set hard. A second-hand indicator switch units are available for about £60, but you never know, you could buy one which causes the same problem!

[@rcunninghamsc]

Thank you so much Jeff! Did this today on my 2012 Frontier and it worked perfectly. This has been an annoyance for over 10 years.

[@jeffmcilveen2796]

Your welcome. Mines still working as well. That's like 3 years now. I guess I did a good job cleaning it up first. I figured it would last maybe a year.

[@jeffmcilveen2796]

And it's still working 2 years later!!!

[@jeffmcilveen2796]

I cleaned my nubby first and filled it before I put on the jb. I failed the first time so get that nubby cleaned and filed first

[@netmatt12-oq6xy]

Very helpful, I drilled a little hole with a small screw to extend it, and fixed my new Xterra stalk, thanks!

[@jeffmcilveen2796]

Excellent, whatever works is good!!

[@giovanniguerrero8951]

Wow this actually worked.. after days of trying to find the flasher relay (which doesnt exist on my 2004 nissan altima) to realizing this component is what controls the turn signals.. and now seeing that the issue was mechanical (this) with your video. Thank you so much!!

[@jeffmcilveen2796]

Good Stuff !!

[@joeygoncalves7085]

Thanks! I just a little bit of super glue and about 1mm tick plastic glued to the tip of the yelow switch. Been working doe a couple of weeks. Nice!

[@jeffmcilveen2796]

Awesome, mine is still working to after 2.5 years.

[@jokerfleckcast3196]

Just changed a clock spring and now have exact same issue. Only fails to self cancel on the left side.

[@eddt7764]

were you able to fix it using this method in the video.. Were the tabs part of the clockspring or part of steering wheel ?

[@jokerfleckcast3196]

@@eddt7764 yes it works.

[@jeffmcilveen2796]

yup@@eddt7764

[@hillmakeitbetter]

Oh My Gosh the BEEEP! Cant watch. But thanks, watching on mute now.

[@jeffmcilveen2796]

My heavy breathing drove you mad, don't forget to sand your nib before releasing the epoxy. I used jb weld

[@hillmakeitbetter]

@@jeffmcilveen2796 honestly didn't notice breathing. had earbuds on that super enhanced the ignition beep. Oh well. I have an 03 X that's different, but ya got me lookin in the right spot.

[@jeffmcilveen2796]

@@hillmakeitbetter Let me know if it fixes it

[@hillmakeitbetter]

@@jeffmcilveen2796 My dab of JB Weld came off while filling it down. Even after 2 cure days. 😓 I superglued it back on. Then it must of been too big as it broke off during testing. It seems like it might have worked if it had a good bond.

[@jeffmcilveen2796]

I cleaned my nubby first and filled it before I put on the jb. I failed the first time so get that nubby cleaned and filed first@@hillmakeitbetter

[@LenzShankz]

thanks

[@jeffmcilveen2796]

Good stuff.

[@marylamb6063]

Thank you. What epoxy do you recommend?

[@jeffmcilveen2796]

jb weld

[@eddt7764]

Hello .. is this nub that looks little short is part of the clockspring or part of the steering wheel .. ??

[@jeffmcilveen2796]

Its just the nub off the switch that comes off.

[@spacepotatogaming]

Why are you saying hello as if he didn't perfectly explain the issue like what did you even whatch the video????