FIX Ethernet doesn't have a valid IP Configuration

[@jonparker8832]

Did not work, the problem is not the router or the cable because the internet works in another computer. What can I do?

[@lokeshgowtham1819]

Did u get any solution?

[@jonhatansarria248]

1:54was not there

[@StrikeZP]

Same

[@pawematyka2817]

You're a lifesaver. Changing the DNS servers works for me. Thank you a lot!

[@EnriqueCal]

You are welcome! Thanks for the nice comment and I’m glad it helped you with your issue

[@elibabenko4125]

This issue happens to me on a regular basis, sometimes it just fixes itself on its own, and sometimes i use the command prompt solution since its the only one that works for me (even though it only works sometimes) i have no issues with internet on my other devices and ive switched multiple ethernet cables and it still happens, any advice?

[@EnriqueCal]

You could try setting an static ip adress. It can happens that if you have more devices on the same network can make some conflict between some of them

[@landwarrior6024]

Rique, I’ve tried every and all possible scenarios yet no luck . Any advice?

[@EnriqueCal]

Have you try with a different cable? Sometimes that can be the issue

[@seansayo1039]

THANKYOUU SIR YOU'RE A BIG HELP I'VE FIXING MY ETHERNET ADAPTER FOR ALMOST 2 DAYS AND FINALLY I FOUND A HELPFUL STEP BY STEP VIDEO!!! ❤️❤️❤️

[@EnriqueCal]

You are welcome! I'm glad it helped you

[@alpha01able]

Question how come you disabled IPv6 & enabled it back on I'm new to the computer language

[@EnriqueCal]

Hey sorry for the really late answer. Here is a link that you can see how to do it. And to enable it is the same process networking.grok.lsu.edu/Article.aspx?articleid=17573

[@alpha01able]

@@EnriqueCal I'll give it a try and get back to you with feedback

[@EnriqueCal]

@@alpha01able ok, and sorry again

[@sapphy4114]

Life’s bad I have tried everything u said like 3 times already and like a 4-5 other things Which are reboot/reset the router call the internet provider the entire router can’t be the problem, cable is brand new bough yesterday like what the hell am I suppose to do

[@EnriqueCal]

Try setting up an static ip instead of a dynamic one. Maybe is a conflict

[@sapphy4114]

@@EnriqueCal fixed it after the 5th call with the internet provider they finally admitted it’s their fault and dealt with it them selfs in 5 minutes.. sucks that they instructed me to go out of my way to a pc repair shop instead of doing the job they are “qualified” to do

[@EnriqueCal]

Sorry to hear that, well at least you have it now fix. Sometimes dealing with companies can be the biggest pain

[@vaoqy]

@@sapphy4114what happened like how was it there fault and what did they do?

[@nordingudal4996]

Hey sir do you think I should get a new Ethernet cable just jnxase ?

[@EnriqueCal]

That depends, maybe can be the problem, but I can’t say for sure without testing it myself, and I can’t recommend you to buy one if that doesn’t fix your problem. If there is a way that you can try it with a cable from a friend or to send it back after you have try it then ok

[@HyrosClips]

@@EnriqueCal i’ve tried buying a new ethernet cord, i’ve tried every possible solution in this video and still have no luck… could u please help me out

[@EnriqueCal]

@@HyrosClips something that you can try is to set your ip manually and to try different ones. First you have to see what available ip address your router have (is a range) and set the ip of the pc onto static instead of dynamic. Is a little more complex and I don’t have a guide for it. But you can see how to do all using Google search. Another possibility is that your router have a problem. I would contact my internet provider, tell them about your ip issue to see if they can change your unit

[@HyrosClips]

@@EnriqueCal i didn’t try first step because i couldn’t figure it out. i called xfinity and they didn’t help me much. I jus tried changing the router and it still doesn’t work. I noticed that when i type “ipconfig” in the command prompt im not getting a default gateway. I search it up and it said there no way i could connect to a network without a default gateway. Is it a problem with my PC? I’ve tried connecting my TV to the ethernet and it works so i’m confused at this point. If it is a PC problem what would be the solution because i just put in a new motherboard,new ram, and new cpu. So everything is pretty much new. Please help🙏

[@EnriqueCal]

@@HyrosClips look at this: www.techwalla.com/articles/what-happens-if-i-dont-have-a-default-gateway now when you installed the new mono did you as well did a new Windows install? Did you use the same cable and port on your router to connect your tv? If not try it

[@ramanharbi1060]

my problem was solved by CMD, and I was crated a block rule in firewall that was a main problem thankyou netsh winsock reset netsh int IP reset

[@EnriqueCal]

Thanks for sharing

[@SDZKProductions]

Thanks for help, didn't work for me but you explained the steps well and it could be a problem with the modem i use.

[@EnriqueCal]

Thanks for leaving a comment, I’m sorry that the video didn’t helped you

[@EnriqueCal]

@RussiaTerroristState maybe changed your ip somehow, thanks for answering so someone that have the same problem can try it!

[@oangiex]

The internet works on every single device except my PC. If I change my network module in the motherboard, I can get Ethernet to work for a couple weeks then I lose my connection. I have tried everything. If I reset my network I don't even get the side blue notification when the network is reset.

[@EnriqueCal]

Then is probably a problem with your system. Or drivers problem or the components itself from your pc. You will have to try to get a network card and install it to try if this is the problem

[@spaceorbison]

Mine had something to do with the firewall

[@உண்மையின்குரல்-வ8த]

Thank you for your helpful video

[@eltprany_1]

Thank you this really helped me

[@Oran_Lee]

I wish I saw your vid before I went and did a reset. But if that doesn’t work, I’m going to try and change the DNS setting like you did. I haven’t seen anyone mention that DNS setting at all and I’ve watched a ton of videos. I was wondering when someone was going to give that a try. Lol Thanks for posting this and trying to help us out!

[@EnriqueCal]

You are welcome and thank you for your encouragement!

[@Nameless_TF]

Thanks alot was doing alot to try fix it lucky I found this what told me to change the DNS

[@EnriqueCal]

You are welcome! I’m glad it helped

[@spencergiddings3681]

Took me 4 hours of trying a whole boatload of methods and I just now realized that one of the ports on the router doesnt work

[@EnriqueCal]

Oh, yeah that can happen. Most of the time the most easiest things are the ones that can give more problems

[@KAI.1]

I dont have a router so I just plugged in the ethernet to my pc but It says ip address not valid but I can connect to bandwith with my name and passsword.Could you help?

[@EnriqueCal]

With the cable you don’t need to enter any password it should work automatically

[@Thedarkknight74-25]

Thank you, sir You made my day 👏❤️

[@EnriqueCal]

You are welcome. I'm glad it worked

[@jijijijijjjiijijijjjjj]

Thanks man! My problem solved!

[@EnriqueCal]

You are welcome

[@Catshorts-Gaming]

0:16

[@sekomomo2935]

Thanks broo❤❤😍

[@EnriqueCal]

You are welcome! Thanks for the comment

[@joshuavillaluz2979]

None worked for me

[@EnriqueCal]

Have you tried different ports on your router? Have you tried to format your system and perform a fresh windows install?

[@AlexPurds]

Tried every option, nothing worked. Cant connect to my wired d link extender and ive no wifi option on my pc. Ive tried literally everything and nothing has worked

[@EnriqueCal]

Have you tried with a different extender?

[@PiecectrlMarkus]

nothing worked

[@EnriqueCal]

Have you tried with a different modem or router?

[@dikra-1937]

Thank uuuuuuu , you save me

[@EnriqueCal]

You are welcome!

[@YoelGuerra]

great help!

[@EnriqueCal]

I'm glad it helped you!

[@coolbeans6148]

Will wiping the computer and resfing it to factory settings work? Ive been working on this for days, i dont have time for this pos of shit winblows system.

[@EnriqueCal]

Sometimes it can help, try first the easy things, like changing the cable from the ports on your router, uninstall and reinstall drivers. Try a different Ethernet cable. Then you can try to format your drive and make a fresh windows install. But don’t forget to backup everything important from your pc. If nothing work can be 1 of 3. 1. A problem with your internet provider 2. Bad router (you will need to try with a different one, don’t purchase one try a friend or something first) 3. The network controller on your system have issues.

[@coolbeans6148]

@@EnriqueCal thanks for the response. I fixed it, it was a hardware issue. I bought a cheap wifi usb stick and works now 👍

[@EnriqueCal]

@@coolbeans6148 Great! Nice hear that you could fix your issue

[@Asurendra334]

lifesaver

[@EnriqueCal]

Thanks! Glad it helped

[@Kmr-lx9rz]

Don’t fix 😢

[@coolbeans6148]

Non of this fixed it. Great vid though but im totally shocked non of this worked.

[@EnriqueCal]

Have you changed any software from your pc without making a fresh windows install?

[@coolbeans6148]

@@EnriqueCal i fixed it, was a hardware issue. Bought a new wifi usb stick.

[@K2Kutt]

@@coolbeans6148how?

[@michelleoconnor516]

You’re going too fast.

[@AdamJoseph-c6b]

So fast and I cannot follow

[@neilfitzsimmons1800]

Why do these videos always do things so fast you can't even follow in real time...

[@EnriqueCal]

I’m sorry about that, I always try to do a middle point, because too slow the people complain as well and the retention is lower. So I make them like this and if someone need can always pause it