Fix EVERY Skipping Launcher| DON'T open IT|BEST FIX🐱‍👤

[@BeybladeDad]

The best and sure way to fix your launcher. Don't open it up, unless there is an internal problem. Broken gears can still happen. Remember you cannot use your launcher at WBO tournaments once you fix it this way (but I'm sure you weren't taking it anyways) Check out the Beyblade fundamentals here kzbin.info/www/bejne/fInCmWdjpdGsbas

[@reubentherblazer9756]

It actually works, You gained an instant subscriber, Thanks daddy. ☺️

[@reubentherblazer9756]

@AROOKIE I meant that as both a thank you, and a joke at the same time 😂

[@jajathenewking6131]

Seems to be the best way to fix Hasbro launchers but the one thing most people don't have a glue guns. Though like you said any glue except crazy glue works.

[@BeybladeDad]

Looking back through the comments, some have tried super glue with success. There's a couple of launchers I've yet to try this on. Like the proto launcher, Sparking (which is the most reliable imo), the Phoenix launcher which is different from the others 🤔

[@StarZoGoated]

@@BeybladeDad Would regular glue work??

[@BeybladeDad]

@@StarZoGoated which kind? I've seen in the comments some have tried different glues, but the risk is getting it permanently glued (in the wrong place)

[@planetkerbeus4528]

Thx so much Beyblade Dad for this video! I have the LR string launcher which comes with Master Diabolos. I am also a beyblade youtuber and when my launcher stopped working, I almost wasn't able to launch beyblades and continue my channel. It was hopeless...... Until you made an awesome video and saved my channel THX SO MUCH!

[@BeybladeDad]

That's what it's all about 🙌 I'm glad to help out. I actually found out my launcher (the same LR launcher you mentioned) is broken. The super cool part is that I can still use it! There's one small gear held on by a metal dowel, mine is broken but works perfectly fine 🤯🤯 it's a good launcher!

[@2kJetzu]

My hasbro sword launcher started to be weak since January of 2019 and today I’ve fixed it thanks to this video

[@BeybladeDad]

That's amazing, I'm glad I could help out🙌 thanks for watching and leaving a comment ✌

[@dredenmiller9522]

could you tell me if i need to line it up with the bump or the hole in the weird little plastic disk?

[@duragdee2760]

I've been having problems with a few of my MFB string launchers skipping. I wasn't aware that clicking was the problem. Thanks for the video, mate. This really helped me.

[@BeybladeDad]

It's a pleasure to help out. Thank you for watching and leaving a comment ✌✌It means the world, thank you 🙇‍♂️🙇‍♂️

[@shockdoggo6889]

Did this with superglue and it genuinely works!

[@BeybladeDad]

You must have been very careful! That's awesome to hear!!! I like the hot glue because you can eventually replace it. Thank you for leaving a comment ✌✌✌

[@1Tyson11]

Dude I was so worried about doing this and messing up with the laucher, but it was actually very easy to do, and now I have my ripcord launcher at full power again ❤

[@BeybladeDad]

Awesome! Glad to help out ✌️

[@metarufaitobeiburedo6331]

Bro you saved my life!!! Thank you dude. Im so happy I found your video, I had so many broken launchers and I had no idea what to do👍🏻👍🏻

[@BeybladeDad]

It's a pleasure to help out! I hope you get loads more rips from your launcher graveyard ✌️🙌 happy blading

[@ykitslux]

Just the video i was looking for bro thx 😭 I lowkey Couldnt find it

[@BeybladeDad]

🙇‍♂️🙇‍♂️ I'm luck you did too! Thank you for watching, let me know how it goes✌✌✌

[@itzmeluke9193]

@@BeybladeDad hey this is my other account i can't get it to work

[@BeybladeDad]

You have to make sure that the white part inside doesn't keep spinning. It is tricky, but the good thing is you can take the glue out and try again. It did take me a few tries to do it too😅

[@itzmeluke9193]

Ok but you know that part where the bey goes on well whenever I put my bey on it it falls out with the bey sometimes like the bey is too heavy

[@BeybladeDad]

Oh, in that case maybe that middle shaft is worn out. Glue it too? The new Beyblades maybe out of the question for that launcher, there's so much torque when we launch.. there's replacement parts even metal parts too www.shapeways.com/shops/gauntlet-combat-tops

[@agenttoast8560]

what does it mean when the holes align with the clicker???

[@mirage_phantom3591]

Dose this work with the hasbro sparking launcher?

[@goodnightcapsule2254]

I tried it and it actually works better than when I first got my red hasbro launcher

[@BeybladeDad]

That's awesome! Keep on blading!!! Thank you for leaving a comment ✌✌

[@goodnightcapsule2254]

@@BeybladeDad I sure will and I wonder if this works on MFA launchers

[@Erik2582]

Thank you sir, this is my son's favorite laucher and he stopped using it until we found you video.

[@BeybladeDad]

Awesome! That's what it's all about✌ I'm glad to help out🙏

[@NahImAquatic]

Hey dude do you know how to fix a shark launcher it’s really hard even tho I followed your hasbro step.

[@mahin_c]

At 4:16, what opening were you talking about?

[@BeybladeDad]

In this case I'm referring to the two small holes on the white part that spins the bey, this can be aligned with the little piece inside that makes the click noise that looks like this 01:36 inside

[@mahin_c]

@@BeybladeDad Ok, I understand the holes. I'm pretty sure you're talking about the 2 holes across from each other on the launcher? I still don't understand the little piece that makes the "clicking" noise, however. Is the part that makes the clicking noise that piece at 1:36 where you said "this is what get's warned out"?

[@BeybladeDad]

Yep, exactly

[@mahin_c]

@@BeybladeDad how can I identify the clicker in the rise launcher

[@mahin_c]

I'm a little confused on the position of where I align the two holes with the little clicking piece for my hypersphere launcher. Can you guide me to a timestamp of the exact position that I hot glue it? I was having trouble understanding that part of the video.

[@echo1033]

What he means is when you see a big hole put the glue into the gaps to prevent clicking

[@dilrubamokammal1089]

This totally works! He deserves 10k like

[@BeybladeDad]

I'm just glad to help out ✌

[@prestonarsenault9975]

Really not sure what's wrong with mine, I just got my hands on a Takara Zero G Dark Knight Dragoon and it came with a white launcher. Everytime I launch it sounds really....grindy or scratchy and doesn't spin very fast. It's like the cord is skipping.

[@marcdhanielmorada8703]

Can i use a normal Glue?

[@BeybladeDad]

It could work, but if it's too runny it may go inside the gears. I suggest the hot glue because if you don't get it right the first time, you can keep trying by taking the dried glue off. Let me know how it goes ✌✌

[@aidanguzman7092]

OMG!!!! thank you so much! your my hero im subbing and clicking the bell!!!

[@BeybladeDad]

👏you rock! Thank you, it really means the world 🙇‍♂️🙇‍♂️

[@vergefnbr]

700th like love your vids bro keep it up!

[@BeybladeDad]

You rock! Thank you 🙏 and I'll definitely try

[@vergefnbr]

@@BeybladeDad appreciate that so do you, also i was wondering does canada still sell evolution beyblades cause in the states they dont have them in store only online and there all alot more expensive, cause i saw you got the ultimate tournament set and ive been looking for it please let me know.

[@BeybladeDad]

@@vergefnbr I've seldom seen them, only on clearance though. I mostly see Surge and Pro series now. Yeah, don't over spend when purchasing online. I'm still looking for a reliable Beyblade distributor to partner with.

[@vergefnbr]

@@BeybladeDad yeah thanks i actually got ordered a ultimate tournament collection i found on ebay new but only for $80 usd so the original price, its just got some box damage other than that perfect, i also found a lost luinor and berserk roktaver for 5 dollar each and a original color fafnir for 30, thank you so much for your time, have an amazing day god bless you!.

[@Rainbow54679]

I have my brother launcher but anytime I lunch it it skips I was like wo no power and attack and also the fake string my launcher was sticking it to the lunch

[@lowkeydiegoduran4724]

Holy crap dude this worked like a charm with the hot glue thanks! :D

[@BeybladeDad]

Np, when it skips again, just remove he glue and do it over. I'm glad to have helped out ✌✌ thank you for watching and leaving a comment 🙇‍♂️

[@davyzeradaspalmera]

@@BeybladeDad how the hell do i do that

[@paologhabrielgarcia6621]

what if the gear was the problem because mine was ok and the bump but the gears was ni working help pls help

[@BeybladeDad]

There are replacement gears from WuboAF on Instagram. Check out his stuff

[@pixelpxxle35yearsago61]

Sir, Thanks but there is still small figures that needs to be in the fake launcher where do i put it

[@royal_glamrock337]

@Beyblade Dad u can Just open the Clicker Launcher thingy and put a gluegun on it

[@ernestonavarro6742]

I got one stadium pack and one bayblade wouldn't lock in. It wasn't the launcher it was the bayblade. I then got another stadium pack and it was the same problem. Do they do that on purpose to make you buy another bayblade?

[@yukidogzombie4708]

I will try this since my riptide launcher has been skiping a lot

[@BeybladeDad]

Awesome! Let me know hot it goes, I still don't have that one😅

[@yukidogzombie4708]

@@BeybladeDad it's a good buy for the bey, the launcher made it about a year then started to skip

[@Iced_Mints]

Does anybody know how to rebuild the exact same sword launcher? I opened it thinking something was wrong and now i want go close it again but i dont know how.

[@the_infiknight4420]

I'm back my dude, If u Can can you please find out how to fix a sparking lucifer or general sparking launcher

[@BeybladeDad]

What happened to Lucifer, or the launcher?

[@the_infiknight4420]

Welp to be honest. NEVER TRY RANDOM MODS FROM UR HEAD. I used variant lucifer 2a mobious but put a thick rubber lego tire around it, after launching it a few times now my sparking launcher gets stuck or launches with literally no speed PLZ HELP!

[@the_infiknight4420]

It was to speed up my rage since I dont have a left spin TT launcher

[@BeybladeDad]

Hmm, well if when you shake it there's no noise, then the gears are okay. If they're okay, then check your launcher by removing the part that holds the beys. For the sparking it's only a Phillips screw driver. The white part inside may need to be replaced, or glued as well.

[@the_infiknight4420]

When I shake it there's a quiet rattle of something shaking and half the time when launching it'll skip the whole string

[@nolan_aubert]

Ty beyblade dad

[@BeybladeDad]

Welcome 🙌 glad to help out ✌

[@adrox9074]

Will it work on the phoenix light launcher if the holes are too small?

[@BeybladeDad]

That's a good question, I'm looking at it now, and it has a different mechanism (from what I can tell). You're right the holes are smaller, and tbh I don't want to open it up because it works perfectly. I'll ask around on reddit.

[@adrox9074]

@@BeybladeDad thanks so much for replying but I still tried out the fix and it worked. The glue went through the holes and fixed the launcher. You are the best beytuber.

[@BeybladeDad]

@@adrox9074 That's awesome you got it to work! Thanks for letting me know about it, I'm just happy I could help, thank you for being there🙌

[@adrox9074]

@@BeybladeDad Your welcome. Btw I got these 2 new b-88 launchers and I wanted to ask you if you have any tips on how to keep them in good condition for a while.

[@BeybladeDad]

I think if you refrain from clicking them the wrong way, they last longer. The launchers wear out over time, so eventually we'll have to replace them. But replacing the string, and having spares (even ones that don't work properly) is good, so you have spare parts, thanks so much ✌✌

[@danonsos48]

What do i do if i accidentally clicked my launchers and the beys keep falling off? Is it fixable?

[@kirop7]

Do you think it'd work on the Digital Sword Launcher too?

[@ksaga8406]

Hi beyblade dad, does this also work for BU sword launcher from BU Xcalibur?

[@bn4389]

Can you use gorilla glue? Also how long do you have to shake it?

[@BeybladeDad]

It depends. There are some gorilla glues that expand.. don't use those. If it has a fast drying time, you should be okay; that's why I chose the hot glue gun. It dries within a minute.

[@rudrapratapnath3605]

Man I can't explain I am so happy my launcher is more powerful thanks

[@BeybladeDad]

Glad to help out 😁 thanks for watching and leaving a comment 🙏

[@mariosalaiza9109]

It didn't work for me in the Hasbro lancher it still lanches to weak

[@BeybladeDad]

It takes a couple of tries, but the good thing is the glue can be removed. The trick is to make the white piece and the prongs stick together. Good luck ✌

[@taykasha]

Can we do this with the Sparking Hasbro Launcher?

[@BeybladeDad]

Hi, yes you can 🙌 let me know how it goes ✌

[@Nivimiv9670]

Sooo what happened? 😁

[@royardenio1730]

Thank you so much it really helped me

[@BeybladeDad]

That is awesome!! I'm glad to be helpful, thank you for watching and leaving a comment ✌✌

[@njnj87gamer39]

hey , i've got a problem recently , my BU sword launcher takara tomy is skipping and cracking , can you do a video about it please? i've been trying to fix it but i never succeed

[@dreni_2yt609]

Im confused. What do you mean by “allign it” ?

[@BeybladeDad]

To make sure the two pieces are together, so you can glue them. Since they are on opposing sides, you can align the holes with the bumpers

[@dreni_2yt609]

@@BeybladeDad im sorry im still a little confused. a few weeks ago i bought the hasbro sparking launcher with brave valtryek. now it makes a wierd rock-y noise when i launch it and its really week. do you know how to fix this?

[@superiorblader6702]

What if I wanted to replace new sand paper on my hasbro spark launcher?

[@unkkyy._.]

Can you use super glue?

[@BeybladeDad]

Some people have, I think. IMO its better not to, in case it gets in the gears. Let us know how it goes✌✌

[@Sensaki_CariagaZt]

Could you also fix the Xiphoid Xcalibur one?

[@borutouzumaki3251]

thx for the quick and ez fix

[@BeybladeDad]

I'm just glad to help out ✌️😁 thank you for watching and leaving a comment

[@軍パイン]

How can remove the part where you put the beyblade in?

[@BeybladeDad]

That's why I made this video. In most Takara Tomy and Hasbro Beyblade Launchers that part doesn't come off.

[@zeniplayz160]

Does it work with super glue?

[@Salinthegoat]

People not knowing the meaning crevice. Me who paid attention in grade 4

[@BeybladeDad]

🤣🤣

[@vermillion7196]

The only bad thing is if you do this on a ripcord launcher the teeth on the ripcord will break

[@vermillion7196]

Btw it also makes it even more powerful

[@itzmeluke9193]

Do You have a discord so I can show you whats wrong with mine?(if not I posted a KZbin video on it

[@BeybladeDad]

No, I have Instagram and a Facebook page.

[@itzmeluke9193]

@@BeybladeDad dang if only I had my phone on me rn I left it somewhere but right now I'm using my grandma's phone

[@itzmeluke9193]

@@BeybladeDad and also here's the other video kzbin.info/www/bejne/jaqzdWNroKhln7M (also sorry for bring such a pain I had 3 issues and I've only said 2😅

[@Zombie-TV]

I turned the inside of a Hasbro launcher into a mini beyblade.

[@ÁcidoClorídrico]

i opened the launcher iand i'll try this, is there any problem?

[@ÁcidoClorídrico]

and by the way i can see the clicker moving

[@BeybladeDad]

@@ÁcidoClorídrico how dis it go? Did you fix it?

[@soothingslider7404]

Hey does superweld glue work because my LR launchers lose alot of power when I launch and I think its skipping but idk hope you can help me,also it kinda helps if I slowly launch but not alot

[@BeybladeDad]

I've had some comments saying they have tried and succeeded using super glue. Just be mindful of the mechanism inside.

[@soothingslider7404]

@@BeybladeDad and how do I do that because im still cunfused because idk what you mean by align the holes whith the clicker

[@mrfloaty7253]

Does this work on fake launchers?

[@BeybladeDad]

Sure does, at least the ones I tried (flame)

[@mrfloaty7253]

@@BeybladeDad does s3/sb work?

[@professorninja3722]

Broo i did this to my didgital sword launcher and now the clockwise is not workout anymore only the anticlockwise is working

[@Simon11679]

Heya! My LR Db launcher skips on the left spin mode but not on the right spin mode, how come, and could you maybe make a video about it?

[@gamerpig4077]

Is it fake because i had the same problem

[@Simon11679]

@@gamerpig4077 nah, i fixed it btw, i just had to glue the thing inside the part where you put the bey in, it was really loose and let the launcher freely spin

[@surajrajeev780]

Will it even work for Takaratomy proto launcher

[@BeybladeDad]

Good question 🤔

[@muhdshukriabdhamid7043]

The proto launcher does not skip

[@rickyramirez9228]

Yo man I haven’t tried it but seems dope

[@BeybladeDad]

Thanks! Im here to help ✌✌ Check out the longest string launcher in my new vids 😁😁 (If you have time)

[@Zippo3036]

Yeah I think I this trick

[@BeybladeDad]

Let me know if you tried it, and what you think of the quick fix✌

[@SageFighters]

Dannng so if I use an official pro series launcher, and glue the gear to repair it, I can't use it in tournaments.:( but the bright side is, THANKS FOR helping me fix mine! It really helps!

[@BeybladeDad]

Yep, it's a double edged sword, but if you think about it; it wouldn't be a good idea to bring a launcher that doesn't launch right 🤔😅 In glad you found it helpful. Thanks for watching and leaving a comment ✌️

[@GiyuTomioka_19]

Thanks it helped me out so much

[@BeybladeDad]

Glad to help out ✌️

[@thejabberwockyoftheeast4639]

The rip cord on my takara Tony l/r launcher is not feeding through my launcher anymore. Any help?

[@BeybladeDad]

Is it stuck? Or won't come out?

[@thejabberwockyoftheeast4639]

@@BeybladeDad it won't go through the hole at all unless I force it in

[@BeybladeDad]

I have a video about the retraction problem. I think that's what you're talking about. It may be the spring inside that's broken. It's the same mechanism for a lr launcher that makes it go back in.

[@thejabberwockyoftheeast4639]

@@BeybladeDad well its a rip cord launcher not a string launcher

[@BeybladeDad]

O0o0o0o sorry I misunderstood 😅 hmm that does happen sometimes to me, but it doesn't stay like that for long.

[@BFLAT604]

How do u remove hasbro nails

[@BeybladeDad]

They're no nails. I tried several ways on the video

[@nicolassanchez3099]

Do something similar with MFB ropchord launchers

[@BFLAT604]

Yea I miss those solid launcher rips

[@sanchitasoni8829]

How do i find this launcher screws

[@BeybladeDad]

That's a good question, I would go to the hardware store with ones you already have, to match up a new one. I'm not sure of the size and thread😅

[@thenormie]

Unfortunately my mfb snipe launcher actually has the ripcord skip. I put a long piece of tape on the back of it and it fixed it, but it’s a little harder to pull now

[@surajrajeev780]

Will u test it and make video

[@gabrieladarne343]

Did any one notice in the first scene the ripcord is cut and thats the reason it doesn’t have power in the start of the video

[@royal_glamrock337]

Guys if u dont have. Glue gun while fixing ur beyblade Solution: Glue Gun (Non Optional) , A very Small Tape (Optional, and a Super Glue (Optional) (Dont Put it on the Middle put Super glue in the Clicker

[@ravagetriz4629]

Bro in my takara tomy LR ripcord launcher from the holder and sticky tape thing like came out and now it is free spinning and no power in launch

[@BeybladeDad]

I'm not sure what you mean?

[@ravagetriz4629]

@@BeybladeDad from my takara launcher a sticky plastic type thing came out and now it is free spinning and no power in launch

[@ravagetriz4629]

It came from the holder part holes

[@ravagetriz4629]

@@BeybladeDad bro

[@AriPegasis]

Could u make such a video for MFB?

[@BeybladeDad]

I'll look into it. I only have a few of them, and tbh haven't used them much. Tbh I thought they had a screw?

[@AriPegasis]

@@BeybladeDad idk, but when I asked in a discord server why mine was messed up this is the answer I got: "LL2s break easily because they use small plastic gears that very easily bend and break, combined with a high gear ratio that puts a ton of stress on the gears It also doesn't help that it relies on its plastic shell to keep the ripcord held in place against the internal gearing, which can also wear out and makes the problems of small teeth even worse String launchers have none of these problems, and so as long as you use proper technique when launching and know how to take it apart to unjam it when the string slips off the spool, a string launcher will last for years with no loss of power"

[@Gungnir0]

Man I gotta buy some glue

[@Gungnir0]

And probably a hot glue gun if I don't have my old one

[@ytpie2953]

Actully ill subscribe

[@BeybladeDad]

Thank you, your support and viewership help me immensely. 🙏 Stay safe✌️

[@ytpie2953]

Your welcome

[@gallader1359]

I'm too poor to buy launchers so I'm still using my proto launchers

[@KarlllMusic]

i tried that but my launcher aint spining no more

[@BeybladeDad]

Oh no! you can still remove the glue with a small tool, and try again. Make sure to keep moving it, so it won't happen the next time ✌

[@y9eprim56]

Thanks man for this mod 👍

[@BeybladeDad]

Np glad to help✌

[@cool522shorts]

Can you fix the sword launcher from xiphoid xcalibur

[@dexzburst1668]

I just flip the paper and put it inside the launcher that it skips and after that it fix.. and its powerfull than hot glue..

[@dreni_2yt609]

how? please tell me how you did this

[@dexzburst1668]

@@dreni_2yt609 fold the paper and put in inside of the spinning part of the launcher, So it wont skip.👍

[@grumpydragon8934]

wait bro i click my beyblade onto it before launching

[@luishirosagi6212]

Can I use white glue..?

[@BeybladeDad]

I haven't tried, but it may work. It's a little runny so I'm not sure if it will stick the gears. I think some have done it with super glue (check in the comments) and it worked

[@luishirosagi6212]

What about gorilla glue?

[@BeybladeDad]

@@luishirosagi6212 I wouldn't red it, it would be more permanent.

[@luishirosagi6212]

Ok

[@rayyzvz]

How to check if its alligned with the clicker?

[@BeybladeDad]

To check you can see through the holes (usually at the inside of the piece that grabs the bey)

[@ushasukhwani8620]

thanks!😀

[@kristofferpanora688]

What do you mean by align with the clicker with the crevace if you can specify I will totally subscribe and like.

[@NutellaClarinet]

Works but then when used on sparking beyblades it did not work properly except for my mirage fafnir

[@NutellaClarinet]

Plus it works for only other beys such as the 1rst season, 2nd, 3rd and the 4rth season beys

[@NutellaClarinet]

Though it is a great solution

[@BeybladeDad]

It maybe the extra weight of the sparking beys. Thanks so much for watching and letting us know about the issues you faced. The good part about this mod, you can always take off the glue and try again 👍 happy blading ✌️

[@MJL-2003]

This does not work. I wasted a large amount of glue and also my launcher, now I can't use it anymore

[@BrawlyCreeper]

QnA: my lr launcher skips at right but normal at left. And I dont even crank my launcher

[@anitaruizol5378]

it works thank you

[@BeybladeDad]

Awesome!! I'm glad I could help✌️

[@marielpellot1350]

Thx

[@BeybladeDad]

You are very welcome!🙋‍♂️

[@SageFighters]

I wonder why they don't allow it tho

[@tcalpajora]

It’s still not working 😭😭😭😭😭😭😭

[@BeybladeDad]

It may have a problem in the inside. Sorry to hear😥

[@titanshublader3709]

Cool

[@BeybladeDad]

Thanks!✌

[@beysunited4525]

Help pls my metal launcher is not working pls help pls help

[@BeybladeDad]

Is it skipping?!?! The easiest fix would be to transfer the launcher's holder to another one. You can even change to a sparking launcher too!

[@beysunited4525]

@@BeybladeDad the sparking launcher has hooks?

[@BeybladeDad]

Sparking launchers have a center screw that is exactly like the older launcher.

[@beysunited4525]

Hello how can i fix it

[@beysunited4525]

Its takars tomy

[@jellykrieg7249]

Tx bro 😁

[@BeybladeDad]

Np ✌

[@turtle7588]

My sword launcher broke a part

[@BeybladeDad]

Oh no! How?! What happened?

[@turtle7588]

I mean when I pulled hard one of the gears broke inside so it wasn’t fixible without a new gear (thankfully it was the Hasbro one)

[@aibotrules2722]

School glue?

[@BeybladeDad]

Hmmm... I don't think it has the adhesive power as the hot glue 🤔 but if that's accessible, I'd try it! Let me know how it works out

[@aibotrules2722]

@@BeybladeDad I tried it and it was worse! I think I put too much because it performs worse than before. Idk what the problem is.

[@blindgt]

Mine stopped working after the glue part

[@BeybladeDad]

You may have glued the mechanism altogether. Which glued did you use??

[@blindgt]

@@BeybladeDad regular school glue

[@blindgt]

I got it to stop squeaking on accident but it was supposed to squeak I have another one and it squeaks and it’s perfectly fine, it’s a fake one so idk if would work

[@blindgt]

I took my good one apart and compared the parts and everything looked the samw

[@blindgt]

I think it’s something wrong with the release mechanism, maybe the spring part and releases the beyblade

[@dosdeasadaporfavor7000]

Ande pues vaya turorial

[@imangry653]

Him fixs no power launcher ha my launcher has not much piwer yet destryoed 2 phoenix