Fix Hoverboard Blinking 9 Times - Its Not What You Think!

[@OldSkoolF]

If you have a red flashing light on one side and it wont move and Recalibrate doesn't fix it... Check all plugs and wires are getting good connection (Especially the 5 wire sockets). If they are and it still don't move then it probly has a blown output fet on the side thats red. They're easy to change.. MAKE SURE BATTERY IS UNPLUGGED!! Measure the Mosfets, 6 on a heatsink per side(GDS)... Usually only 1 or 2 short... DMM to Diode, Neg on Center pin (Drain), Gate approx +1.5v, Source approx .5v. YST7575C crosses to RU6888R 68v 88a TO220 *** For the 12 Fet Mainboard Model, one bank of Fets controls one drive wheel. Do a continuity test to figure out what bank controls what side.. Each bank of Fets, are broken into pairs per thick drive wheel wire (YGB)..

[@johndurante2322]

Correct. I had a ground wire out of the four that go inside of wheel motor. I solder ground back on and hoovwrboard worked without having to balance it

[@Lee-haw]

I have the same hoverboard interior circuit, but different model, named "Smart Falcon" I bought it used with dead battery and broken charger port. I replaced the battery with good one, it works, but i have a problem figure out the wiring of positive and negative of the charger port, i use Multimeter on the socket on the circuit board, but no reading at all. Am I doing something wrong? How to know for sure the wiring diagram, besides cable color,?

[@IonutMarian_Radu24]

Hello! I have a similar issue, BUT the LED flash 7 times. Do you know what this means?

[@bugjuicebritt]

I got a problem with my hoverboard should the tires are not moving but it is charged and we bought it off someone and we opened it to see the problem and there was one red cord not plugged in does that mean anything can the wheels lock up and if they do how do I fix them?????

[@methus9812]

Brittney Couch wich one? Is it a big plug with 5 electric tiny sticks inside the plug?

[@methus9812]

Brittney Couch or is it green?

[@ramondiaz8814]

where does those wires hes holding at 1:40 go my brother disconnected it and doesnt know where it goes and now it blinks a red light and wont move ive tried recalibrating it but it seems that its because of that red and black wire

[@methus9812]

Ramon Diaz its the wire that connects with the on and off button

[@PR3M3]

I have a question how do you take off the plastic cover on the future saw is just un screwing it from the body I want to get it painted

[@Streetsaw]

+E99Y.O Yes, it is quite simple to remove the plastic panels by using a regular philips head screwdriver.

[@PR3M3]

StreetSaw Hoverboards thank you very much

[@muhammadaliyasir4]

Plz share your contact numbet plz.

[@cassandraliverance680]

Maybe you can help me... My hoverboard doesn't move on one side and a red flashing light blinks on that side and beeps repeatedly. After charging completely, the side that doesn't move and blinks red worked for about a half a second before going dead on that side and blinking again. also (on the same side) the blue light on the front acts as though it has a short in it, as it will come on and kind of flicker in and out? i took the cover off one side and checked all the connections. Everything was fine. However, on the side I'm having issues with, there's a single screw i can not remove to save my life, and the cover on that side is nearly impossible to pull off to even get a glimpse at what it looks like inside. I've tried looking this issue up online and I've come up with nothing but advice for re-calibrating, which I've tried and it won't even seem to do that. I'm at a loss. Do you have any idea what the issue may be?

[@Streetsaw]

Hi Cassandra, What type of hoverboard do you have and would it be possible to get a video of this happening. You can share it with us via chat on our website at streetsaw.com

[@mkr32]

can you help me how to connect Arduino with hoover board wiring diagram and code for Arduino for speed control

[@shannonjones6865]

I need some help. My sons hoverboard just has beeping and blinking green lights when try to turn on. I can't find anything around this happening. Any ideas

[@africans1968]

Can you put bigger tyres to the wheels?

[@joselukao1]

hello I'm from Brazil. when this light flashes twice. what does it mean ? I've researched. and it's not right I await a response.

[@piotrpawowski6265]

I have a hoverboard Skymaster 11 double wheels, the board turns on and after a while it stops working, I disconnect plug from batery to electronics. I take multimetr, and there is a shortcut on the electronics. I take schorcut plus with the minus in electronics plug, i take multimetr and i do not have schortcut , after connecting electronic devices it works again, what could be wrong?

[@kristenaas3721]

When my hoverboar mainboard little speaker make long beep sound what does it mean ? It long beep always and not turn off. Battery and indicator led lights are green.

[@Streetsaw]

If the hoverboard will not turn off, you need to replace the motherboard with a brand new one. The current one is faulty. www.streetsaw.com/products/hoverboard-motherboard-replacement

[@kcj1003]

How did you turn it on like that at 0:47?

[@methus9812]

kcj100 just put an metal screwdriver between two of the three electric sticks inside the plug

[@rialsaan2]

my hoverboard is blinking the red light twice, do you know what does it mean??

[@Streetsaw]

+rialsaan2 Which light on the hoverboard is blinking twice?

[@bedooosama2565]

i need the firmware for hoverboard please my mail is [e-mail]

[@wolfrolf9767]

hallo i have the same problem but bilnken 2 timer red in the motherbord plz help

[@methus9812]

I also have a super rare problem with mine, it was wrecked and i repaired it. So everything was okay until i noticed that my battery indicator was not flashing red before it died, it only shows that the battery is active

[@JaceN3D]

Same with mine

[@mmfrobot7065]

Halo. I have a Hoverboard. Scooter. When I turn on, press the move button to move and stand and not to move unless I turn it back on. Teach me what to do. What is the solution to fix it. I am from the Republic of Iraq and subscribers to your KZbin channel. 

[@garynilsson6759]

My segway has just stop moving and iv put a new battery in .all the lights work and bluetooth makes the right noises. Can anyone tell me how to fix this ? Is the gyroscopes broke

[@E_Lhou]

What is the name of this hover board

[@mixit2010]

What does it mean if the light flashes 2 times and continues an makes noise wirh the flashing?

[@Streetsaw]

You would have to show us. Which light? How is the beeping sound? Could be dead battery, or could be bad motherboard.

[@calebsen5844]

same problem

[@Streetsaw]

mixit2020 Dead battery

[@mixit2010]

It was bleep bleep...bleep bleep so I checked all the wires there was all ok but the light was continueing to flash yeah like crazy an still wouldn't work never seen nothing like it...

[@mixit2010]

batterie was fully charged

[@abrarahmed3575]

my hoverboard is blinks many time and also creating noise can you please asst me what to do?

[@lexegamer5811]

Hi man, I got the same problem and the hoverboard doesnt work how to fix it please?

[@erol5857]

Bro any solution why the battery indicator is on orange color and the indicator on charger is green?

[@bens3767]

Did you find an answer to this question. Mine is doing the same thing

[@kristupas8sadauskas826]

i got the same problem how to fix it please?

[@Streetsaw]

Same problem being what?

[@kristupas8sadauskas826]

my segway wont to turn off how to fix it??

[@diy_ebikesq8162]

1 mosfet is ded you need changedd..

[@tristangilliam7362]

I got new sensors for mine. And installed them and it doesn't move still. And I haven't tried this. Thanks hopefully it works

[@m7medgamer256]

How can l fix my haverbord she dont work but th led on and cant walk

[@jaba4712]

My hoverboard red and blue indicator light keeps on blinking I don't understand what's gone wrong. Pl anyone help me to clear my doubt.

[@wdmanila6699]

I just read 9 times meanins you opened the hoverboard upside down

[@musanabi23]

What needs to share ? Gyro , motherboard ?

[@Streetsaw]

+Joschua Parvez I don't understand your question.

[@musanabi23]

+StreetSaw Hoverboards What must change ? Gyro or Mainboard ?

[@Streetsaw]

+Joschua Parvez Nothing needs to change. The blinking light 9 times is simply an indicator that you turned the hoverboard on while it was upside down.

[@musanabi23]

+StreetSaw Hoverboards Ok , when I turn comes , normal , but not balance . What is the problem ? Thanks for you Answer

[@Streetsaw]

+Joschua Parvez Most likely the gyroscope. You can get one here (make sure it matches the same before buying): www.streetsaw.com/products/hoverboard-balance-sensor

[@Luke-v4]

Mine flashes 9 times in correct position and shakes terribly when on it.

[@krazzykaceee312]

My hover board won't turn on, & beeps when i plug it to the charger, I opened it up & everything seems to be connected, what could i do?

[@Streetsaw]

What exactly do you mean it beeps when you plug it into the charger? Is is a UL2272 board or an older board? If it is an older board its most likely about time to buy another one of these: www.streetsaw.com/products/hoverboard-battery-replacement

[@krazzykaceee312]

I believe so... it starts beeping when i plug it up as if i get on it & it does this constantly & the two lights on the board starts turning on & turning back off

[@mariusmicu2695]

My hoverboard say The same with The Red blink but wont let me turn off.... Please help

[@ther12k]

Just the same

[@hassanharuna1067]

My hover board is beeping Continuesly and is not working showing two red light on it plc help me out

[@mer_3451]

Same

[@johndurante2322]

Turned out my ground wire came off inside the wheel. I weld it back on and my hooverboard worked without balance it

[@legodonne1]

the red light on my charger flashes. what does it mean

[@Streetsaw]

It sounds to me like you need a new charger. Usually when the charger flashes red, its a bad charger. When the charger has solid colors, such as green or red, its usually something electrical, such as the battery. You can buy our BEST brand new replacement hoverboard charger here, and it comes with a full 100% money back guarantee warranty (guaranteed to fit too): www.streetsaw.com/products/replacement-hoverboard-charger If you're looking for one on the cheap, we also have this one (we don't generally recommend this one though, and no warranty): www.streetsaw.com/products/cheap-hoverboard-charger

[@tiliov21]

I have the same problem my CHARGER FLASH RED WHEN PLUGGED IN THE HOVERBOARD AND THE WHEEL SHAKES, BUT when not plugged in the Hoverboard the light in the charger stays solid green

[@yungwing4940]

solid red battery and solid red circle LEDs light up. new charger (AC ADapter) new motherboard and gyros installed. please what do you think it is"

[@methus9812]

Yung Wing tried recalibrating?

[@methus9812]

Yung Wing did you get a new battery as well?

[@diy_ebikesq8162]

Hy,, 1 mosfet is dead you ned to change dem' mosfet first identification after change..good look.

[@bradhenry7917]

brand new Chinese Hoverboard won't turn on unless charger is plugged in , why?

[@methus9812]

brad henry tried recalibrating?

[@narkoxx]

how to fix it

[@aliyanaaz3075]

I need you help

[@aaron_4548]

In my case its blinking 12 times please somebody help me

[@mehdijamshidi4931]

Hello my friend I desperately need guidance The Hoverboard turns off in a rough bump and the accelerator suddenly shuts off Sockets are sturdy Do you have an email to send me an electronic circuit photo thanks for your help

[@muhammadibnu2503]

My Hoverboard Blink In 8 Times how to Fix?

[@kristenaas3721]

Hoverboard works great just the long beep noise motherboard speaker ...

[@Streetsaw]

Not sure what you mean?

[@joostv.l9203]

maybe you can help my hoverboard doesnt turn off

[@Streetsaw]

Yes, for a hoverboard that doesn't turn off read this article: www.streetsaw.com/pages/hoverboard-wont-turn-off

[@kristenaas3721]

the beep noise stays on

[@Streetsaw]

See my earlier reply.

[@brienatalie]

lol this is insane. sorry, your not allowed to know what's wrong with it until you heave this hunk of meatal above your head.