swapped a 2 bbl to a 4 bbl Holley and my TV cable is too short. Now i'll have to get a longer one. It's on a 70 Impala and I'm afraid I'm going to mess up my trans. I bought the same chrome bracket. works fine for acc, but not TV cable
@todaylets25832 жыл бұрын
Great job at recording and working at the same time. Very hard to do but you did great.
@jonathansmith47483 жыл бұрын
Hey it looks as if the cables don’t come straight ahead to bracket, slightly curved it seems. That’s what I’m dealing with just wondering if it’s ok
@youngjj75711 ай бұрын
That's the problem I'm having now... Did u find a bracket that fixed your problem? And what's the part #
@deerslayer58634 жыл бұрын
Just bought the same cable bracket kit for my Edelbrock SBC 350 c10 video helped alot thanks
@farynaidyn Жыл бұрын
Which kit was it. I've got to do the same for my 83 chevy 305 edelbrock vs2 carb.
@deerslayer5863 Жыл бұрын
I had to cut weld exstend bracket to for like it should its tci bracket
@irredeemabledeplorable52273 жыл бұрын
I always find it odd that aftermarket brackets never seem to get the RIGIDITY that is designed into OEM units. I haven't found ONE of these chromed or stainless brackets that are up to the task of this VERY IMPORTANT cable setting.
@jessehoyuela44345 жыл бұрын
Will that bracket work in a edelbrock 1406 carb?
@GearheadGarden5 жыл бұрын
It should. The 1400 series are 99% copies of the Carter AFB.
@yello45435 жыл бұрын
Did u have to cut/modify bracket to fit on the carb?
@GearheadGarden5 жыл бұрын
Yes, but not to fit the carb, rather to allow for the vacuum line to the power brake boster. If you do it this way make sure to use a lockwasher, double-nut or something that won't let the bracket move as it will no longer have 2 anchor points.
@RiggsGaming4 жыл бұрын
hey there, i have a 700r4 in a 92 camaro, my TV cable came with it, TPI engine but i sweaped to carbed, now my TV cable was way to long, with out it on, or very lose it shifted normally, but terrible acceleration, now, when i took up the slack in the TV cable it shifts very hard and late as hell, and it didnt pull any clicks out of the ajuster i just took up the slack. any advice?
@PardeepSingh-qt2fk3 жыл бұрын
too much tension on TV cable. watch a few other videos on adjusting the TV cable. the ratcheting adjuster you're mentioning is the fine adjustment and the slack you took up will be the bulk adjustment. Make sure you watch videos you will burn up you're transmission like I did because mine had too much slack and the geometry was off.
@RiggsGaming3 жыл бұрын
@@PardeepSingh-qt2fk thanks for your reply, turns out there is roughly 6 tv cable lengths, depending if the car came with a carb, tbi, tpi, v6 etc. It ordered a cable for a model year of my car that came with a v8 carb stock, as thats the swap i did and it works good now, came out a couple clicks, good tension etc. Thanks!. If anyone has my problem chrck out theirdgencamaros forums on tv cables and lengths, they are not all the same, and one size doesnt fit all
@athomas30824 жыл бұрын
Hey what part is this i see its tci
@johnytorres87705 жыл бұрын
Hi I have a tri power set up out of a 60 impala in my car. With 700r4 .how do you know if you got the right bracket for it. Any ideas .do they even make some for that. Thanks
@GearheadGarden5 жыл бұрын
The best info I've found for a setup like that is here: www.tvmadeez.com/tri-power/ Even without 2 extra carbs dealing with the TV cable can be frustrating I know. Hopefully that helps.
@chihuas4545 жыл бұрын
What carb is this? Thanks
@GearheadGarden5 жыл бұрын
The one on top of the box is a Holley Street Avenger 670CFM (Basically a 4150). The one on the manifold is a Carter AFB 625 (9635SA). Both have electric choke and emissions provisions.
@thedobermangang35032 жыл бұрын
FIX YOUR SOUND
@thedobermangang35032 жыл бұрын
no sound
@thedobermangang35032 жыл бұрын
NO SOUND MY BROTHER
@MrBama14nc5 жыл бұрын
700r4 is not the same as 4l60
@GearheadGarden5 жыл бұрын
Sorry but they are. You might be thinking of the 4l60E which is the electronically controlled version. GM just changed the name.
@GearheadGarden5 жыл бұрын
Tranny works fine, it's the burned valve on #7 cylinder that's the problem now...lol
@williamb28545 жыл бұрын
Check your throttle cable for stretch.Mine had a 1/4" play. Had to make a bushing for a temp fix. Adjusting the TV cable at the carb is not the right way.Go by the pedal to the floor for adjustment. Just saying....
@GearheadGarden5 жыл бұрын
Normally yes you are right. But using the pedal wasn't getting me anywhere. If it's a stock setup then the pedal would be enough to get it. This wasn't stock