fix of stuck filament issue in creality K1C 3d printer

[@pogoexplorer305]

Thank you so much, my new K1C had this issue only after 3 weeks of use, and I was worried it was a permanent damage and that I had to bring it back to the store for refund/replacement.

[@Luten666]

You saved my day. In my case, this is the second time. The first time I was able to pull out the filament with little force using the retreating function. This time, the second time in two months, I had to do as shown in the video. Regarding how easily you were able to pull off the lid. It's not so easy when the filament gets jammed inside. For those who will have trouble with this. I recommend that you gently undermine the edges with the included spatula (to loosen the joint), force the lever to the unlocked position and move the filament in different directions (right, left, up, down), rotate it. You can additionally rotate the side wheel of the mechnaizm so as to position the filament in the middle so that it does not block. Just try to disassemble it with your fingers now. At some point, one side should spring back. Now just do the rest and pull the cover off completely.

[@CraigSelinger]

Thank you so much for creating this with such detail. If it were not for you $700 would’ve been down the drain. Thank you.

[@lexunit121]

Print with the top lid off. The extruder motor overheats and heat is transferred to the extruder. Causing the filament to soften and then jam.

[@Mysterycon]

Dude❤❤❤ as someone who just needed clear, concise information and video of the fix…thank you so much

[@philosopher905]

You, Sir, are a hero of the highest order. 🎖️

[@isaacvitor]

Thank you so much. My printer got stuck in the first use

[@artlabuae7303]

Ohh too bad

[@silveralien81]

One and done. This video came up on my 1st search. Fixed my issue less than 10 minutes later. Only difference was my gear cover did not come off as easy as yours 😅. Almost lost a bearing like you warned about. 😮 Anyway, you are my hero.

[@miguelangeljimenezperez3895]

You saved my life man!!! after finished the test PLA roll, needed to set a new roll and that thing get stuck in my 2nd day with the printer. Was thinking if I messed up something or what? But again, your video saved my life. Thank you very much.

[@suvomcduvo255]

Fantastic video! Concise yet informative - gave me enough context to know how to make the same fix myself with confidence. Thank you so much for posting this!

[@AfeefMuhammad-dx9ho]

Bro best video out there on how to resolve this issue very well explained 👍

[@beanfield33]

Thanks for taking the time to record this. You saved me a lot of headache.

[@floofyboi7546]

Obscure KZbinr with a solution to my exact problem strikes again! Thank you

[@5nsolf]

الله يعافيك ، فكيتها وسحبت الفليمنت وبعدها دخلت اليوتيوب وشفت مقطعك

[@ScottayH29]

Appreciate the walk through. Just got my printer and mine seems to be clogged. Going to try this as soon as i get a chance

[@artlabuae7303]

Glad that this helped. Enjoy

[@yongseoksuh9008]

I've found the good remedy thanks to your video. I really appreciate.

[@remyhairextensionsbywithlo5998]

Thanks man thumbs up worked like a charm.

[@codykuhnle5902]

Awesome video man. The easiest one that I found. Looks like you saved another one out here.

[@nicohernandez1926]

Thanks. You really saved me, best tutorial ever

[@whotube357]

Thank you for this video. It was a big help

[@CP-zu5pi]

Got a new k1c that does this. Helpful walkthrough. Guess i need an extra cooling fan on the top haha

[@siph86]

You're amazing man, really thank you!

[@davehrcfpv]

Thank you for this very useful tip

[@F0rtuneLT]

i sure do love having to disassemble my 400 dollar printer, one hell of a way to keep my heartrate in the triple digits

[@aristidesgutierre6243]

Worked like a charm, you’re a genius!

[@danienteaqualcosa]

life saver! THANK YOU SIR

[@brunomello7499]

thank you so much for this video! helped a ton ❤❤❤

[@oscarbecerril8343]

Thank You very much, good Man. This helped me a lot. This is my first 3D printer, so I wouldn't know how to fix it.

[@Groguthegreat]

Very useful thank you, my parts are stuck together though which makes it much tougher

[@missilpeludo8813]

You’re my savior !!! Tks buddy

[@stopmotionkidcreation]

Thanks this helped a lot with my printer.

[@hvaneik]

thank you soooo much, this helped me out.

[@emanuelv5934]

Thank you so much!! You helped me a lot!!

[@3d_dxb]

Thankx bro .. that was really helpful.. fix my tube back 😆.. مشكور 🦾

[@Fibrildesign]

You saved my business 😂😂 Thankyou

[@hen069]

Bro thank you so much

[@EnricoVidal]

Thank you so much! 🙏🏼

[@brinquedosbrazuca]

It worked. Thanks

[@artlabuae7303]

Glad to hear that. enjoy

[@shanmukeshdadi3194]

Thanks a ton bro

[@Xevailo]

2:12 --> Is there atrick to separating the upper lid from the assembly? Mine feels like it's glued shut or bolted down

[@artlabuae7303]

I don't think it's glued. Work it out slowly dont use shaprt tools. There are only two bolts. Try to gradually pul the upper lid. Try to create tiny gaps from each side in parallel it might work. Again do it slowly don't let it pup out hard you might lose the bearing.. This is pretty much everything about it

[@mikhailkh8560]

how did you solve it? Mine is exact the same. Stick hard

[@luisdateigeiro7273]

@@mikhailkh8560Im having the same issue. Anything that worked out for you?

[@mikhailkh8560]

@@luisdateigeiro7273 use the Force Luk! I gently but consistently apply ut from different sides and angle. Also use several plastic cards to save progress. And after plenty of attmps, suffer, tears and pain - its just jump out, and nothing has been damaged. Thanks god, it happens only once for me.

[@mikhailkh8560]

@@luisdateigeiro7273 force and several plastic cards. Slowly , but I was able to make it, without any damage.

[@razTAH-p6h]

How did you detach the bowden tube? You skipped that bit XD I can't get the white cap out, and I don't want to force it

[@razTAH-p6h]

Got it :)

[@stou999]

@@razTAH-p6h How did you detached it?

[@Circuitflux]

Having the same issue occuring often!

[@AcademySimRacing]

This is ridiculous. Mine is new and has this happen after every print. Crazy

[@artlabuae7303]

I hope this helps you mate. If you still struggle with it try to change the filament. It may work

[@_neto7]

If you are using Hyper PLA this WILL happen, the fans only turn on after the first layer, and this lets the extruder heat up and melt the filament that is inside off it...

[@oreo7669]

@@_neto7 is there a way to prevent this? I just had to change mine out and figured it was due excessive vibrations since it was just on an old wash machine lol

[@Savage_Viking]

This method works to clear the filament out of the extruder but it happens on the very next print. Even have to do this to change filaments. I believe this is an engineering problem with the design.

[@kyleyidspawn]

Check the right requirement temparature for your filament & hotbed

[@minorca360]

TOP

[@nmole10]

Thanks for the vid might’ve saved me a week of migraines

[@aarongarza8631]

What causes this, it's happened serval times, is it a creality k1 thing? Prusa is going to end up being printer of choice because this keeps happening and it's annoying, I wanna say it has something to do with printing speed