Fix or Replace Lower Door Trim Molding 2017+ Honda CR-V. Repairing Broken Plastic Car Parts.

[@JonnyDIY]

*Tools & Supplies Used* Epoxy Glue JB Weld- amzn.to/2LEq9nX Trim Adhesive Tape- amzn.to/2K0ucG6 Trim Panel Tools- amzn.to/2NITvPe 170 Piece Mechanics Tool Set- amzn.to/2xoyu5c Safety Glasses- amzn.to/2ez41Jw Respirator Masks N95- amzn.to/2xX32x3 Mechanic Gloves- amzn.to/2w0i1SP Nitrile Disposable Gloves Large- amzn.to/2w0dlwc *Thanks for Watching! Help Support the Channel by Subscribing & Clicking the BELL Icon for all NEW Videos!*

[@t.c.8796]

Hi! How do you remove the chrome window trim at the back driver window? 2019 honda crv. It has dent someone dented it and I want to try and fix it or replace it... i dont know exact name of the part. Thanknyou

[@JonnyDIY]

I havent removed it but most likely its snapped on or glued. Can try popping off with plastic trim tools. Will look at piece later

[@debbiefees3283]

This saved me hundreds of dollars that the dealer wanted to charge me! Thanks for the clear instructions- you are a lifesaver!

[@JonnyDIY]

You're very welcome, happy I could help you out 👍

[@rachacha13]

Thank you for this!!! My panel had come clean off, I was able to reattach it in under 5 minutes thanks to you!!

[@JonnyDIY]

Awesome! You're very welcome, happy I could help you get it fixed 👍

[@pirataboricua]

JD: Your video was a life (and $) saver. I got a kit with all the tools to make the repair expecting to take a few hours, I even ordered the double sided tape from your link. Usually you find complications and what looks like an easy job becomes and ordeal. Unlike you but after seeing your video, I pulled the bottom middle of the molding to separate the non-sliding guide from the 2021 CRV door frame. I was hoping to slide the molding sideways while keeping the guide out. After ungluing the bottom side edge I decided to just try to snap the molding back in. This worked for me, IMHO a miracle, Halleujah! BTW, when this molding first unsnapped, I tried to pound it back in but it didn't work. Two suggestions: do this on a hot day so that the plastic molding is more flexible to avoid cracking it, and start from the bottom to work the guide out first. Thank you! I and could not have done this without your video. I agree, this is a bad design and a money maker for Honda and the dealers.

[@JonnyDIY]

Thanks for sharing JP. And you're welcome, glad I could help you get it fixed 👍

[@jacksisson8316]

Thank you!!! Just the information I needed. Very thorough and so clear!

[@pipingmad11]

2019 CR-V, I can't believe how bad a design the doors are. My passenger side (Australia) both doors have this problem. A lot of the white clips are broken. Lucky to get them on E-bay. Your video has helped a lot.

[@JonnyDIY]

You're welcome, happy to help. Yeah it's a horrible and cheap design they went with. I was very disappointed with Honda on this one

[@tiffyloveslipgloss]

@@JonnyDIYhorrible design. I went to a clients house to do her makeup one day and she introduced her husband. He told me he’s a designer for Honda. I put my makeup brush down and turned to him and said “now we need to talk about the door panels on the 2020 CR-Vs.” I was being half cheeky but he didn’t think it was funny he was pretty annoyed I said something 😂

[@JonnyDIY]

@tiffyloveslipgloss ahaha that's hilarious! And lol I can't believe he got annoyed 😆 he knew what you meant though!

[@alea781]

Thank you sooo much for this video. I was able to repair and place my panel back on! Clips/fasteners that fit 2017 Honda CRV are QT278 by Oautoo Top head size 12mmx15mm Bottom head size 14mm x 20mm Stem length 10mm

[@JonnyDIY]

You're very welcome, glad to hear I was able to help you out and thank you for sharing that helpful information 👍

[@AntonioGGATX]

FWIW looks like the 2014 uses the same system. Thanks for your video!

[@JonnyDIY]

You're welcome, happy to help. Thanks for sharing that. It's such a bummer it was designed this way. Really have to be conscious and remember to pull away from high sidewalks or lawns when have passengers getting in and out. Wish they would redesign it so it was flush with bottom of metal door or just all part of door

[@tattersaildiamond3609]

Marvelous explanation for each step. Thank you!

[@JonnyDIY]

Thanks! And you're very welcome, happy I could help you out 🙌👍

[@carterhowe5593]

You can also remove the clips without tools by pushing them to the side and then turning them 90 degrees up. They’ll come right out.

[@JonnyDIY]

Cool thanks, will try that next time 👍

[@tomu1983]

This video helped me a lot, thanks. Greetings from Finland ✌️

[@JonnyDIY]

You're very welcome, so glad was able to help. Wow Finland! How cool, greetings from California, US 👋

[@readysetdrone]

Thanks!

[@JonnyDIY]

You're welcome! 🙌👍

[@jaykrom852]

Good video- only one out there describing the crappy, weak Honda clip holders in the side mouldings. My 2013 is similar with double stick tape and clips that look like they should slide sideways (but break!) I just used 3M or Permatex weather strip adhesive (black) to fix the end of mine.

[@JonnyDIY]

Yeah its such a poor design. So easy to break. Yeah some good adhesive tape will fix most 👍🏻

[@ashleyalexander6901]

Do you know what kind of weather strip is on the door that you connected to the panel? I am looking for a replacement for that, but am only finding the kind that goes on the around the whole door frame

[@JonnyDIY]

Well there's the strip at bottom that goes on the plastic cover and then theres the adhesive tape all around it. Best bet is to call or go into local Honda Dealership parts and service department. Tell them what you need. They can look up part number and order.

[@jilenvera5243]

This is very helpful. Thank you for sharing!🤘

[@JonnyDIY]

You're welcome, happy I could help 👍

[@richardwilliams1986]

My Crz has similar problem except it's rocker panel mouldings, the car is so low that it amazing clips were not designed for clips to give rather than break moulding. I hope epoxy working term, thanks for video

[@JonnyDIY]

You're welcome. Yes its just cheap poor designing. I really wish they didnt even have those plastic panels and just made the styling from metal. Some good molding trim tape helps a lot too 👍🏻

[@munibasyounis2819]

Can lower trim be bought separately ? I rashed mine on a curb

[@JonnyDIY]

Yes I believe so, not sure about part numbers though. May be worth a trip to your dealer parts department to ask for pricing and or get part number

[@JimVincitore]

Great video! Very cool! THANK YOU!

[@JonnyDIY]

You're very welcome, happy I could help you out 👍

[@DarrellChapman]

would this be similar to the repair on a 2014 crv? I've checked a few places and I see a few others mentioning this problem but the help (outside of this video) is not out there.

[@JonnyDIY]

Im not sure, but it should be similar.

[@dojadog7989]

Darrell Chapman would love an update if you have it.

[@navamylvaganam622]

What are those white clips holding the panel called?

[@JonnyDIY]

Sorry don't know part number but some sort of trim clips. If go to dealer they should have them, can at least get part number from them if outrageously overpriced

[@pidginwidgen]

Thank you

[@JonnyDIY]

You're welcome, glad to help 🙌👍

[@hankyk]

I need a video on rav4 hybrid 2021. There is a screw I can’t figure out

[@kevinfirkus8947]

Good job thanks for the info very helpful.

[@JonnyDIY]

Thank you and you're welcome, happy I could help you out 👍

[@terence4427]

What does lower body trim do? Is it worth it to install on my '22 Passport? Nice video, btw.

[@JonnyDIY]

Thank you. On this vehicle its mostly for styling. On some it can help with aerodynamics. If yours didn't come with it I'd leave it stock looking 👍

[@J.B24]

Is there any way to prevent from ripping it off in the first place?

[@JonnyDIY]

It's really a design flaw how it hangs lower than metal part of door. Only way is to somehow prevent your passengers from swinging door wide open onto higher ground above curb. Or usually happens someone opens door, then sits and door now lower and try and pull it shut and rips it off

[@android10xD]

Is there one for 2012 to 2016 models

[@JonnyDIY]

Not sure, should be similar process if those have similar bottom door trim/skirts

[@Monarch15w]

Anyone have a video on this for Pilot?

[@luisatabares16]

Does anyone know where I can buy these clips for 2019 crv?

[@JonnyDIY]

You can get them directly at any Honda Dealership, just go to the service parts department 👍

[@ikehek9726]

Pro tip remove rubber grommet from door then remove screw in panel to experience the slide off effect

[@lobut16]

Thx bro!

[@blaw7717]

Yah... isn't working for me. Slides about 3/8“, then stops. What is it hanging up against? Don't wanna just rip the trim panels off, but I've removed those lil Phillips head screws, and still can't get the panel to slide off.... How much force did you have to use til it released and slid off???

[@cameronmorgan0203]

Hey Jonny do you have an email address so I can send you some pics of this 2009 Chevy Traverse that needs some lower rocker panels on the right side and the part on the door which is called the side trim strip. I am looking for those brand new parts so I can order them online if not go to a junk yard

[@JonnyDIY]

I dont have any sort of parts catalog program unfortunately. But if you check carparts.com or partsgeek.com should be able to find parts. When you find parts compare pricing with junkyard or salvage yard. Id rather get factory oem parts on things like that 👍

[@cameronmorgan0203]

@@JonnyDIY I just looked on both sites and unfortunately wasn’t able to find what I was looking for

[@JonnyDIY]

@@cameronmorgan0203 can call dealer and talk to parts department and get a quote for the parts and get the part numbers too. Then can check online compare pricing. Sometimes dealer will even match or come down on pricing when show them online retailer pricing 👍

[@Babyviper17]

Yeah. I had to order my driver door side. I kicked the edge corner trying to close the door and popped off.

[@JonnyDIY]

@@Babyviper17 they're such a poor design, piece of crap. Shouldn't have been allowed to make such an easily breakable part.

[@Babyviper17]

@@JonnyDIY True. You already everything thing cheaply made.

[@stevemaricic7585]

Great video!

[@JonnyDIY]

Thank you, glad I could help 👍

[@bryanpereyra5258]

So you have to wait for the glue to cure for 24 hours before you can apply it back on?

[@JonnyDIY]

Yes best to wait a day for glue to fully cure 👍

[@hamzaburney2753]

Was anyone able to find any video(s) for replacing the cladding on the rear passenger door?

[@JonnyDIY]

Should be same process of adhesive and clips

[@hamzaburney2753]

@@JonnyDIY Ok, I'll try it, thank you.

[@JonnyDIY]

@@hamzaburney2753 you're welcome, glad to help 👍

[@elcacatui4525]

Anyone know where I can get new clips?

[@JonnyDIY]

Just go to a Honda dealership service department, they'll be able to get you the right ones

[@elcacatui4525]

@@JonnyDIY thank you boss.

[@JonnyDIY]

@@elcacatui4525 you're welcome happy to help 👍 pretty much the only place to get small parts like that, you can order from honda dealers online too, if you can find the right part and # on the lil diagrams

[@waranyalagle8188]

I just saw VDO and I got problem too. My passenger door seal came off plus can hear wear click click sound when I am driving 😢

[@JonnyDIY]

It's such a horrible design

[@linhpham-rt4yi]

Thanks

[@JonnyDIY]

You're welcome 👍🏻

[@LiteOfArt]

Garnish Assembly, R Rear Door (Lower) $53.04 Part # 75313-TLC-A01 Garnish Assembly, R Front Door (Lower) $75.34 Part # 75312-TLC-A01 Are these the part numbers? they are very hard to find out

[@JonnyDIY]

Not sure exactly. I would call dealer or go buy dealer parts department to find out exact part

[@LiteOfArt]

@@JonnyDIY I have ordered already:)

[@JonnyDIY]

@@LiteOfArt awesome, glad you got it sorted out 👍

[@raulsilva8373]

Te faltó pegar la cinta adhesiva

[@JonnyDIY]

si comprado mas tarde

[@rishikeshpillai475]

can you get the door trim on any websites?

[@JonnyDIY]

Yes theres a bunch, try hondaautomotiveparts.com can also call dealer to price as well. Sometimes prices similar

[@HenPol007]

Where can I find the lower OEM moldings? Unfortunately my wife scratched it pretty bad and we need new ones. Thanks guys

[@JonnyDIY]

Hondaautomotiveparts.com

[@HenPol007]

@@JonnyDIY Thank you!

[@labatomi]

@@JonnyDIY Hey do you have a direct link to the part? I cant find it on the site. thanks.

[@JonnyDIY]

@@labatomi no sorry yeah I remember it being tricky to find the part online. I forget the Honda specific name of part

[@matthewflaherty555]

Can anyone verify the part number/type for this? I need to replace the Driver side rear passenger trim and want to make sure I have the correct product details before ordering it online.

[@JonnyDIY]

Call dealer (service department) and check prices from them, they can also give you the part #

[@SamsungS-wh4dq]

А где 3м скоч

[@JonnyDIY]

@@SamsungS-wh4dq I put link in description box to 3m adhesive tape 👍

[@nirwansiregar2085]

Replacement pilar dashboard