Hello guys this video is showing hot to fix r6 not going into 3 gear hope this steps help you, please subscribe and share. God bless you all
Пікірлер: 42
@lukeguido78932 жыл бұрын
Thank you so much. My motorcycle is a Yamaha R1 and I was about to pull it apart thinking it was the gear lever internal spring. So glad I saw your video. That’s exactly what the problem was. Thanks again great video. Luke from Merimbula NSW Australia. I’m a happy man 😊
@Geed944 ай бұрын
After lubing the ball joints of the quickshifter, my bike shift with way less effort for the foot. It seems like a different bike now. It was very helpful, thanks for sharing this video.
@TheNicksta723 жыл бұрын
“80% or 90% of the people are having this problem” I said to myself BS! i went out and my shifter was stiff as a board! I lubed it up and it works awesome thank you man appreciate it thought I was gonna need to remove the shifting spring thank god!
@HareKrishnakrishnaharexyz3 жыл бұрын
Thanks and I have ktm 200 duke. I have that issue with spring broken. I didn't know what do we call it but your video helped. The service center has mentioned same it cost less and its minor problem. I too got scared
@nikonichbu2 жыл бұрын
you’re the best. just used this for my Yamaha R7. I already ordered a return spring thinking that was the issue and then I came across this 😂
@tedberdigay78732 жыл бұрын
This was the problem with my bike FZR 600, just needed some lube at the foot peg / shift lever from being dry. The bike now shifts into gear, great video.
@frankstone8930 Жыл бұрын
Shops will charge you an arm and a leg to look at it. And will tell you'll need a new transmission along with an engine overhaul 😂 Thanks for the great explanation!
@ryantucholsky8823 жыл бұрын
Good video! Hopefully this works laid my bike down a year ago. Was only going between 3 4 5 gears. Now n 1 2. God I hope this is my problem.
@jmyusa2 жыл бұрын
I had same problemit happened after changing oil Ur video helped me out fixin it . thanks
@Goopie48 Жыл бұрын
Hey! Just wanted to send a big thanks as your video helped me understand why after I installed rearsets on my Z900, it wouldn't shift into 2nd gear. (it was due to the dot on the shift cylinder thingamabob being misaligned). I had no idea about that dot! You're the best and thanks again for the helpful video.
@josephmason92703 жыл бұрын
Great video you ran over everything and you said what all symptoms are and what they can cause. I hope I can fix my bike. Appreciate it man.
@jermalturner21803 жыл бұрын
Freaking lifesaver, the very exact thing changed oil a few weeks back bike was tripping oiled down the spots you spoke of just a few minutes ago and nine is fantastic! Thanks sir
@charleskelly77232 жыл бұрын
Thank you, helped me find out my 01r6 shifter mount was bent so my shifter rod was rubbing on the chassis where I was almost ready just to send it to yammy..
@whisdumbnowbitch73013 жыл бұрын
Had a similar problem with 2013 r1, turns out the shift rod was adjusted too high also the slide motion up and down was kind of sluggish so I sprayed it with some wd40. Adjust the clutch cable and the rod mechanism should resolve your problem.
@obhaiti72383 жыл бұрын
Really appreciate the help!
@berzerker812 Жыл бұрын
“I like to get to the chase” doesn’t get to the chase first 3 fken minutes repeating the same thing over and over
@rossesteban7859 Жыл бұрын
Then dodnt watch video bud.
@mikelesage725611 ай бұрын
Thanks it helped a lot!😎
@lautzy3ify2 жыл бұрын
Very helpful
@markhunter9755 Жыл бұрын
I’m am gonna try to lube everything up , my 08 M109 won’t go up from 2nd . Did a clutch plate change which it needed. Now I’m having this issue.
@cmat10888 ай бұрын
Great video !
@iAmSwog4 ай бұрын
Mine won’t go on neutral on a complete stop but when engine is off goes like butter. What could be the problem?
@Alanthebeast993 жыл бұрын
What kind of lubricant did you use?
@rossesteban78592 жыл бұрын
I just mused my chain lub
@shakeybeatz2 жыл бұрын
Hey bro, how do you get the dot to line up? do i have to take the linkage off from the shaft?
@rossesteban78592 жыл бұрын
Take the bolt off the shifter rod and pull it out cafully alight it properly with the teeth and tight it back up
@shakeybeatz2 жыл бұрын
@@rossesteban7859 I did it mate, thanks all the same. Since doing it, i've had no problem changing gears at all. The last person to touch it was the yamaha mechanic???
@guns-n-bros81002 жыл бұрын
Yeah mine doesn’t return back after shifting, what’s the name of the spring i need?
@rossesteban78592 жыл бұрын
Restore spring or reset spring
@WhoKnows7917 ай бұрын
Do i need to take that thingy out to lube it or do i just spray it on there with the cap off?
@AC-74-145 ай бұрын
Hey I'm having problems with that same situation but I don't got a line and a dot to show me where to put it back to I got a 2004 gsxr 1000 and I replaced the gear shifter because the last one broke and I took it off can't put it back in its original place can you help me??😢
@zuk024 Жыл бұрын
My problem is I’m stuck in between 1st and 2nd gear the bike skips past neutral and won’t upshift into 3rd… happened while I was riding
@albion64692 жыл бұрын
My problem is once im in third and begin to slow down, my bike wont shift into second or first unless i make a complete stop? Please help
@rossesteban78592 жыл бұрын
Try cleaning your ball joints and lubing them see what happens
@juanelote Жыл бұрын
What kind of lube?
@rossesteban7859 Жыл бұрын
You can use the same lolube you use for your chain
@cemalcelik18913 жыл бұрын
My r1 wont shift into second but it wil if the engine is not running
@mowercameron272 жыл бұрын
Any update on the fix for this issue?
@cemalcelik18912 жыл бұрын
@@mowercameron27 bought a new engine. The gearbox was broken. The shift fork is bend thats why it doesnt shift