Fix your Smoking, Bad Mileage & Low Power VW TDI! - Fuel Pressure Relief Valve Upgrade

[@audinutt]

Nice job. Appreciate the content. Keep up the good work.

[@aveirozinou2919]

great video, very helpful, smart diagnostic way

[@juanherrera2672]

Great video! Maybe a fuel catastrophic kit next. Maybe they send you a free one by pluging whitbread performance , the seller. Fairly easy job but the intake needs to come off. 👍. Amzon has some hanging shop lighta L.E.D. s that are very light and cheap and hold up well thats what i have used

[@CateraMV6]

Stellar! I am following your foot prints, Stage 1 now, DPF delete pipe is in the trunk waiting for some free time and good temps to install. Then I need to figure out if I do EGR delete or keep it as is. I may have some coolant leaking but we don't know for sure just yet, the expansion tank was a bit low but I don't know how long its been that way.

[@mk6GTD]

Thanks for vídeo, my 2.0 CR on full throtle kinda looks like a rolling coal, but I think its tuning prob

[@MilanDisljenkovic]

Great videos as always, glad i stumbled upon your channel. What is a long term experience are you still happy with this "FIX". No more black smoke for good or still some ?

[@ThatGuyTyy]

So far so good! I had one friend drive my car a few days ago and he said on really hard acceleration a small little puff of black smoke, but not nearly as much as it was before as when it was WOT it would absolutely bellow from the car in terms of what would be normal from a VW, but not anymore!

[@MilanDisljenkovic]

@@ThatGuyTyy Thank you for the feedback so much, really appreciate it. Very helpful to know that.

[@zerobucks9]

Need help guys! 2014 Q5 TDI (70000 miles) totally stock after emission repair. Experiencing hard to start/wont start, wont stay running. Press the peddle a bit and it will start after cranking for a bit and will idle. Dies as soon as it goes into gear. It has had all Audi care plan complete up to the 55000 at the dealership. I have changed the oil yearly since 55k. No engine lights on, no codes being thrown. OBD reader returns no issues. HELP!!

[@Andrei_Trip]

Nice Job! What do you think i shoud do if my rail is leaking from this sensor? Replace just the oring or also the sensor? (I dont have any other problems with the sensor, just that leak)

[@ThatGuyTyy]

I’d probably just do the oring!

[@emilelarue7987]

Was it throwing a check engine light? I'm chasing a similar issue Puffing black smoke quite a lot Gas mileage is terrible No boost leak No codes

[@ThatGuyTyy]

No code at all! I would get to logging, it’s gonna tell you a lot of what your car is doing! Are you tuned?

[@emilelarue7987]

@@ThatGuyTyy yes tuned and deleted stage 2 Getting to logging tomorrow morning for sure

[@emilelarue7987]

Did some digging this morning, pressure is definitely higher then specified, even at idle!​@@ThatGuyTyy

[@ThatGuyTyy]

@emilelarue7987 yeah if actual is higher likely your relief valve is cooked! Check the date on it and the part # before replacing to see if it’s ever been done

[@emilelarue7987]

Just checked it it's OEM 01/01/2010​@@ThatGuyTyy

[@damian4483]

What screen do you have installed in the q7 ?

[@ThatGuyTyy]

Have a full video on it!

[@naten555]

i wonder if a good fuel cleaner would help clean this part. I have the 2.5 tune mine rolls coal way worse than when it was on the stage 2. not sure it's worth 400-500$ to replace this part honestly.

[@ThatGuyTyy]

Check rock auto - I got mine for less than 200$! I wouldn’t say a fuel cleaner won’t help but looking at it from a mechanical understanding if the internal components are worn your firing against a mechanical issue not something just being dirty

[@392backwards]

What happened to the allroad?

[@ThatGuyTyy]

That was many millennia ago, we’ve levelled up

[@wm7111234]

What's the part number for the Bosch PRV please? Its it 0281006253 or 0281006254? Thanks-Bill