FIXED: Stuck Grain Mill -- Cleaning and Roller Spacing!

**Hit that SUBSCRIBE button, you know you want to!!**
BUY ME A BEER 🍺 Doing so will help support the channel and allow me bring you even more brewing content! thanks and Cheers! 🍻 www.buymeacoffee.com/Cityscape
In this video I show you step-by-step instructions on how to fix a stuck or slipping grain mill so you can finish your brew day, how to take apart and clean, and finally how to set your grain mill rollers for proper spacing.
You can find the grain mill I use/recommend, spacer tools, and food grade mill lubricant in my amazon shop below!
You can see all the exact equipment I use in my videos at my Amazon page here:
www.amazon.com/shop/cityscapebrewing
Other DIY Videos:
Video on the Cold Crash Guardian:
kzbin.info/www/bejne/mJzUY2iMfLRlp7s
DIY wort immersion chiller:
kzbin.info/www/bejne/bWeqXpiIlpyHjMk
DIY Hop Spider:
kzbin.info/www/bejne/rIbMZohvn7mkY9U
DIY Mash Tun:
kzbin.info/www/bejne/eXvOmYeCfcSUe5I
DIY Fermentation Chamber:
kzbin.info/www/bejne/gnvSmoBvbtxlnbs
Turn an Old Fridge into a Kegerator:
kzbin.info/www/bejne/raGzc36hltBshqM

[@preuc3367]

Thanks my mill just seized. Really appreciate this video

[@CityscapeBrewing]

You're welcome!!

[@SCROWMD]

Thanks or this video.I have some neglected maintenance to get to(roller cleaning) CHEERS

[@CityscapeBrewing]

You're welcome! 🍺💯

[@NWsmallbatchBrewing]

Good content. I haven't ever taken my mill apart.

[@CityscapeBrewing]

This was the second time and always amazes me how much dirtier they are than they look!! 🍻

[@johng4503]

Thanks for the info! I had this happen a few brew days ago and I did your reverse spin technique. I haven’t broke down my grain mill ever and I have to do that soon! Cheers!🍻

[@CityscapeBrewing]

They are dirtier than they look! 💯🤘

[@robbiasetti4678]

Great video! I’ve had that mill for 15 years and it’s been giving me a hard time lately. Never thought to break it down. Thank goodness I mill a day prior- it’s really annoying to deal with a full mill that won’t grind on a brew day

[@CityscapeBrewing]

Absolutely! Mine has definitely been through some work.. needed it. 🍺

[@curtpick628]

Good stuff Dennis.

[@CityscapeBrewing]

Thanks! 🍻🤘

[@robbrasmussen7568]

Perfect timing!!! I had this issue on the last brewday. I accidentally ran my drill in reverse for a second and that fixed it. I’m brewing again tomorrow so I’ll give my mill these other treatments tonight. Thanks a ton!!!👍🏻🍻

[@CityscapeBrewing]

Awesome! Glad to help. Frustrating when you're in the middle of a brew day for sure!

[@Nefariousrouge]

A good reminder for me to clean mine since I am brewing this weekend. Friendly reminder to charge up the drill battery too! Last batch mine died just before the last rotation!

[@CityscapeBrewing]

Yeah, you never know when they're going to start gumming up on you! 💯🍻

[@Photologistic]

So glad I have the JSP Maltmill, the rollers are twice the length, much more surface area to grab the grain.

[@CityscapeBrewing]

Yep that helps for sure.

[@Atxjrdguy]

Great Video. Hasn’t happened yet but likely will. And I know you have worn that shirt in another video but I just clued into its meaning. 😂😂😂 cheers

[@CityscapeBrewing]

😂 🍻 it's a good one.

[@Yokoanubis]

Thank you! Very helpful.

[@CityscapeBrewing]

🍻💯

[@jakekivela4507]

All I do is, after EVERY mill, blow out the rollers using a can of compressed air. It gets every nook & cranny. Less than 2 minutes no disassembly needed.

[@CityscapeBrewing]

That's definitely good for maintenance So you don't have to do it as often. I actually use my leaf blower to blow out the entire thing after every use. And it still gets between the rollers on the sides. After a few years and hundreds of pounds of grain. Good advise with the compressed air can trick! 🍻