FIXING $500 BROKEN UTV/MULE OFF MARKETPLACE (PART 3)

[@The_Home_Pros]

Lemme know what you guys think about this 3 part series and thanks for watching!!

[@MrGattor33]

I thought it was great. Good work and interesting to see what you did with this engine after finding out how bad it was. Job well done. Oh and love the outro , some great music 👍🏼

[@The_Home_Pros]

Aw man thank you so much rob!!! I truly appreciate your comment!! It means a lot to me!! It was a ton of work getting this thing running again and making a video of it so Thank you so much for watching and commenting!!

[@larannar123]

Great series on this ATV!!!👍👍👍👍💯 Good job of going through the engine,fixing the problems,that thing is a workhorse and looks fun to drive!! Great trails where you are,thanks for the tour!!😁🥇🥇🥇

[@derekwilkinson7939]

I thought it was a good series, very interesting as usual.

[@michaelmiller4690]

Never heard of that brand of side by side but nice job fixing it.😊

[@bigjay6743]

I've never seen one of those trailhog broke down the 4 we have on the ranch all run strong and they are old now. But we do service all of our equipment quite regularly. Great litte workhorse for sure.

[@The_Home_Pros]

I ended up selling it but now really regret it!!

[@PaulHigginbothamSr]

I am praying for your heart lad. That electrical lift would be very beneficial. Every part up under the bush hog looked like it was on the virge of tilt, I am just saying it was taking all it could. Of course with many trips ya'll don't have to load the excavator so far forward.

[@The_Home_Pros]

thank you my friend

[@Mikefestiva]

Man it sounds like a top! Awesome work on that 👍 thanks for sharing! I also like seeing some of the driving footage and the dam.

[@The_Home_Pros]

Thanks mike!! It was a ton of work but I’m happy it’s pretty much finished, it’s no articulating dump truck by any means lol but it’s still cool. Our house is actually between two dams there’s a much bigger one like 3 miles down from this one it’s what powers the city of Columbus Georgia. I appreciate you watching and commenting! Thanks again!

[@bruceblaylock1397]

Great job bringing that machine back from the dead. I like how you show us just what is done to make it run again. It sounds really goos now! Thanks

[@The_Home_Pros]

thank you so much!! I really appreciate it!!

[@tommyb.7977]

I seriously enjoy watching you revive things. Be Safe and Enjoy

[@Ants_Pants]

Thanks for posting an update my friend! You did quick work fixing that thing up, lots of time and effort but into this project. Glad to see that excavator running again, was kind of a scary looking you standing next to the ex when going up the trailer, thing could just slip and fall on you, be careful bro! Shots on the drone look amazing. Good job

[@The_Home_Pros]

Thanks ants!! Tons of work into this thing!! Haha yea putting the ex on the trailer like that was probably not one of the smartest things I’ve done 🤣 glad nothing got hurt other than my pride lol thanks for watching and commenting I appreciate it like always!!

[@MXguy95]

Heck yea man! Love it! You scored big on that machine. Heck, I think I like it more than my Toro Workman 2110. And I’ve never drove yours! Lol

[@The_Home_Pros]

Hahah thanks jay!! It’s def pretty cool and still needs some odds and ends but it’s at least driving, I’ve been waiting to watch your ditch witch video! That things cool! Thanks for watching brother!

[@aaronwarren8389]

Just finished watching part 3. Love the video. Gave me some great insight on a bush hog. So I'll definitely try and get that bush hog at my work they are junking. I will subscribe to your channel.

[@The_Home_Pros]

That’s awesome thanks a bunch my friend, these things are pretty rare but seem to be built pretty tough!

[@donrobinson2156]

i'm real curious about where you are. what a beautiful environment! i'm on 5 acres in semidesert southern california in the middle of a drought and am very jealous of your water availability. and what appears to be a nice fishing creek. as to your question: your vlogs are so well done i will watch and enjoy any and all you take the time to produce. bigtime thanks!

[@The_Home_Pros]

We are located in phenix city Alabama on the other side of the river is Columbus Georgia, our house is in between two dams, there’s actually a much larger dam about 3 miles down from this one and it powers the city of Columbus and part of Alabama side. The water is really low rite now so people can work on their docks it goes back up nov.3. I really appreciate you watching and commenting thank you very much!!

[@MichaelHerringValdosta]

Love the Chattahoochee!

[@The_Home_Pros]

lol thanks brother! are u from Columbus or phenix city ?

[@bobdoerksen6594]

Nice work! You have very good mechanical skills and I think the channel is going to do well.

[@The_Home_Pros]

Thank you so much bob!!! I hope it does well it’s very hard putting out these videos not to mention I’ve been dealing with some bad heart issues 😔 which makes it a lot tougher. If you have any recommendations to make the channel better just let me know and thank you very much for watching and commenting!!

[@bobdoerksen6594]

@@The_Home_Pros Ya, sorry to hear about you health issues I hope you can get back to a better state. It's because of heart and lung issues that I watch content like yours. I can't do, so I watch. Fab stuff is always good so would like to see the caliper mod. Sound levels much better, camera work is top notch. Thank for doing what you do even though it is a lot of work. Would it be easier to do less editing and put up longer videos?

[@blairfright9622]

might break the frame at hitch with that amount of weight on hitch.

[@jimmycake7143]

nice music sunny ride. great work, btw we like fram up here in ny

[@The_Home_Pros]

Thank you very much!

[@renkemam]

Nice job! I would indeed use normal calipers for the brakes. Only thing to do is making a new bracket. Greetings form The Netherlands. Marten

[@The_Home_Pros]

yes the calipers on this kinda suck

[@carloskawasaki656]

Awesone , great video, 👍👍👍👍

[@The_Home_Pros]

Glad you enjoyed it

[@donaldelrod9172]

good job. seems to be a robust little vehicle. hope you get a long service live outta it. that honda twin is about bullet proof too.

[@The_Home_Pros]

thank u very much!! it was a ton of work hopefully it pays off

[@chox2001]

Great video I think I missed part 2 will go back and check. Looking forward to more videos

[@The_Home_Pros]

Thank you my friend!! I posted 1 and 2 in the description if you want to check it out, thanks for watching!!

[@09FLTRMM77]

Cool!! It seems like it’s a beast! I hope when you fix the seat, you post it. I have to do the same repair on my Polaris Ranger. 👍🏼👍🏼

[@The_Home_Pros]

I really wish I would have spent a little more time and added recovering the seat in this video! It’s really not that hard to do. I have a video of me covering a atv seat in one of my videos on the Honda fourtrax 300 with engine problems part 3, however in the video it’s sped up but still shows me recovering it. Thanks for watching my friend

[@09FLTRMM77]

@@The_Home_Pros No problem, I really like your channel and it’s content. You seem to go about things like l do, and you don’t have a fancy garage/workshop, like me LOL!!! I try to leave a comment when I watch your videos because, I recon through KZbin magic and voodoo,it helps you out, so keep up the good content!!! 👍🏼👍🏼 I’ll go back and watch the other video.

[@haroldgetchelljr3264]

A very good job on that bush hug

[@The_Home_Pros]

thank u so much it was a lot of work, watch all 3 parts if u haven’t already 🙂

[@davesworkshop2714]

Nice job Darrell, she sounds sweet 👌. Hope all is well!

[@The_Home_Pros]

thanks Dave hope u and your fam are good as well!!

[@rebelrouser1720]

I just bought this Trail Hand 4400 with GX390 with 24hp , mine has 350 hrs but i paid 3500

[@The_Home_Pros]

That’s awesome!! Have you had any problems with it? It would be awesome to see some videos of it

[@NilsKall]

That worm was really big! Great testing, looks like a really handy vehicle. Your ramps need an upgrade! What tires will you get?

[@The_Home_Pros]

Hahah their like little snakes, lol I was just kinda messing around with the trailer thing. But yea this thing is pretty handy it can do a lot of work and pulls really well. I’m not sure yet about tires other than somthing really cheap cause I’m a cheapskate lol thanks for watching brother

[@karlmorgan2551]

That thing is pretty awesome!

[@The_Home_Pros]

I love it!

[@PaulHigginbothamSr]

Now ya'll know how to get your excavator to your neighbors if they need some excavator work. This would work even if ya'll went commercial for around the neighborhood. Even maybe the next size larger excavator. Loading it would take some trailer cribbing.

[@AZVIDS]

Mam what a feat getting that thing running👍

[@The_Home_Pros]

man it sure was!! it’s a cool machine though! I’d like to put a diesel in it

[@johnbailey-dn8hk]

I know this is a older video and you did awesome brother. I have a question for you brother, what is the expected top speed on the bush hog

[@The_Home_Pros]

I really can’t remember I just sold it about a month ago I think it was 35? It didn’t have a speedo either

[@johnbailey-dn8hk]

@@The_Home_Pros thank you. I just got one 3 days ago and just got it running. I was wondering because that's a big motor

[@joeloyd56]

I appreciate the video.

[@The_Home_Pros]

appreciate you joe

[@kenstillwell3761]

This was another great video

[@The_Home_Pros]

Thanks ken!! Means a lot to me glad someone likes it 😄

[@roosterpalooza1985]

Love the video. How did you learn to work on engines etc. I am interested in learning to work on my equipment vs relying on a mechanic etc.

[@The_Home_Pros]

Thanks, I started when I was young no one taught me I was just always tinkering and taking things apart and putting them back together, I was interested in RC cars..ect it just grew from there, u gotta have a interest in it just like anything else

[@roosterpalooza1985]

@@The_Home_Pros Gotcha. I'm a late bloomer I guess at 45 years old I have just recently become interested in the mechanics of engines. I spent the last 25 yrs focusing solely on my career and nothing else. Any way i really enjoy the videos and the educational portion. Please continue to explain things as you are doing them it is very helpful. I think this channel is going to grow big time!.

[@hazegoodman6666]

Awesome vedio keep it coming

[@The_Home_Pros]

Thank you very much as long as people want to watch and stuff I’ll continue to make em 😊

[@rickjohnston9113]

Got your self a nice work horse, what happened to all the water?

[@The_Home_Pros]

thanks Rick yeah they drained all the water so people can work on their docs while I recorded this video. I actually have another video of me driving on the lake with it all dried up and then we got a sudden downpour and it was a raging rapid check out that video if you want.

[@rickjohnston9113]

@The Home Pros thanks I'll find it . I'm going through and watching all you're video.

[@The_Home_Pros]

🙂

[@stephenford5161]

great series. I came across a TH440 recently as well that is needing some love. During your trip at the end what would you say you are maxing out at MPH?

[@The_Home_Pros]

prob about 25 mph

[@paultrafford5551]

Put jack posts on trailer for loading and unliading

[@The_Home_Pros]

I was thinking same

[@shanemccoun8334]

What kind of battery does it use? I cannot find out which battery to get

[@The_Home_Pros]

Just a regular lawnmower battery or a small car battery

[@SamCanada1]

👍

[@modex6005]

I love your car

[@The_Home_Pros]

lol thank you

[@Windstonemtn]

Missing part 2

[@eric_seguin]

Videos and work were great. Wanna really piss off taggers. Paint over their garbage within 24hrs. every time they tag. It isn't fail safe but it discourages some of them. Cool project.