I enjoy your humour regarding your joke that you don’t know what you are doing about fixing dent in auger when in fact your knowledge regarding repairs is extensive in a very skillful manner.
@duggydo2 күн бұрын
Andrew is growing up fast. It's noticeable that the little fella is getting bigger. He's a good worker too.
@christisking77782 күн бұрын
He's a swell lil guy.
@BigTader2 күн бұрын
Andy if I didn't know better i would say that Nathan was your son. I've been watching your videos for several years and it seems like Nathan is your go to employee he's a hard worker and looks like he's a good mechanic. Good help is hard to find in this day and age. Stay safe.🍻🍻
@jimpolk2 күн бұрын
That's pretty ingenious fixing Andy. Nice job.
@kaldudas96512 күн бұрын
You are adding body work to what has to be done on the farm 👍🚜
@nickroberge72782 күн бұрын
Nice work! Just a little paintless dent repair. Sounds like the driver owes the shop fridge a case of beer.
@user-yr5ee9vm9e2 күн бұрын
🍺🍺🍺🍺🍺🍺🍺🍺
@Ham682292 күн бұрын
I've done this trick before, never fun working on augers in my opinion. For someone that doesn't "know what he's doing", you sure do know what you're doing, don't care what anyone says Andy. Great video as always, cheers :)
@martinboilard22652 күн бұрын
Hi Andy ! Good job ! Thanks Andy for your time and everybody have a good day at the farm ! 🙋♂️
@donniehodge25482 күн бұрын
Another good one Andy Y'all have a HAPPY 4th of July 🇺🇲 🚜🐄👍
@alfredomarotta66042 күн бұрын
Darn, Andy she's almost better then new....didn't surprise me a bit 👍👍🍻
@CharlesSmith-ty2ce2 күн бұрын
Have a good 4th Andy if you can find time 4 it 😊😊
@gavinperry7237Күн бұрын
I have been going back & watching some of your older videos & it blows my mind the capital investment in equipment required to spread on the fields the volume of manure your dairy operation produces.
@ronaldfeuerstein4352 күн бұрын
I knew you had it fixed before you even started working on it. The funny part was! When you said that you didn't have any ideal what you was doing. You had it right from the get go!!!
@lesterhertel29452 күн бұрын
Another very interesting video Thank you Andy 😊😊😊😊
@fastsetinthewest2 күн бұрын
Very impressive family dairy operation. The Hourigan family legacy lives on in documentation. I looked up the late Mrs. Hourigan on Find A Grave. She sure lived a long and profound life.
@stephensteen90582 күн бұрын
You’re pretty handy there, Mr. farmer good job
@Bowhunters6go8xz6x2 күн бұрын
Maybe a good idea to weld on a couple small bolts for studs along the bottom of the auger and use them to bolt in a piece of aluminum reinforcement under the auger to help keep it from being dented again? Happy 4th Andy !
@tolipydob2 күн бұрын
Use it up, wear it out, make it do, or do without. 🙂Thanks again for the content Andy.
@calvinrhoades44062 күн бұрын
In our area a neighbor had a sicours jack . You have to pull the auger, but weld on what diameter pipe you need and go. We have half inch pipe couplet welded to it,and various laughs of pipe to run it from the end. Just a suggestion! Good luck. 😅😅😅😅😅 I
@x_Dude12 күн бұрын
Neat little trick to pull a dent out. Expected one of those pull hammer thingies.
@williamgreenway98932 күн бұрын
Your giving away some of your secrets.😂
@FarmingFixingFabricating2 күн бұрын
I know right
@beckyumphrey2626Күн бұрын
Andrew is growing like a weed. He is gonna be a brute. Amazing what he.does at his age. Andy your.entire family.all all hard workers. You and Mom have done.great. Betting Charlie is going to be a Dr. :)
@brucebell10902 күн бұрын
Tell the young viewers how important safety glasses are when stuff under pressure sometimes pops.
@budfisher691618 сағат бұрын
Pretty late now but I expected to see you touching the outside of that dent with a few hammer taps to take out the stress??
@stevenclaeys62522 күн бұрын
Thank you for another Great video. Cheers
@aidanbroderick23002 күн бұрын
Unbelievable craftsmanship from someone who doesn't know what they're doing 😂
@kenpalmer19002 күн бұрын
Boy you are patient
@jimmclean160Күн бұрын
You finally admitted it on camera !!!!
@thewayidoit88952 күн бұрын
Hawk Tuah! Spat on that thang ( tire) NATHAN!
@johnhenderson2992 күн бұрын
Great repair job guys
@ibkhansen80362 күн бұрын
you can also use a mirror to see where you have to rate out now you don't have a tool with which to knock it out a stench with a weight that you can pull back and forth
@arthurlapp98182 күн бұрын
I usually weld a piece of chain to the tube heat it and pull it with a come a long and just leave the link welded on if it's no going to be in the way
@jayheiman7388Күн бұрын
Good to see Andrew working hard. Looks like he needs a haircut
@jamesmorrison18842 күн бұрын
Hello Andy nice repair you all have a good day.
@user-ni8ye9wo8g2 күн бұрын
Dang Andy, you could probably get a job at a paint and body shop. 😂😂
@bobsyouruncle15742 күн бұрын
Odd, I don't see any new bruises on your knuckles. Must've owed that driver a favor.
@FarmingFixingFabricating2 күн бұрын
It happens, not a big deal
@Chuck-GuyittКүн бұрын
At 22:40 all I had was visions of the whole bottom melting out.
@user-yr5ee9vm9e2 күн бұрын
Great Vid 👍👍👍👍🍺🍺🍺🍺
@user-ee9eb4he9o2 күн бұрын
Can you store corn seed for the next year? Thanks olgoat
@ryanlesperance79262 күн бұрын
Is the corn you feed before using the stuff in the silo yours? Just curious why you don't feed out the corn in the silo first to avoid spoilage. I suppose if you use the corn in storage you pay less storage. Love the videos!
@MorganOtt-ne1qj2 күн бұрын
You don't find much custom storage for Hi Moisture corn. Andy has it figured out how to extend his supply of the stuff. I'm amazed at the operation.
@FarmingFixingFabricating2 күн бұрын
It’s all good
@user-yr5ee9vm9e2 күн бұрын
It's hotter than coo coo brown down here in Ky
@joepfeiler5911Күн бұрын
No thought of the day from Nate? or did I miss one?
@patrickerger72715 сағат бұрын
Worked. ❤
@scotthawkins15382 күн бұрын
I don't know, but I was thinking if you heated around the outside of the fent and in to the middle of it as you tighten it up it may work ??? 🤔🤔 Great video as usual
@FarmingFixingFabricating2 күн бұрын
Heat is hard to control though
@jenniferwhite60892 күн бұрын
with the expansion are you buying an other feeder mix to hand the extra cows
@FarmingFixingFabricating2 күн бұрын
No we have enough of everything
@janicewilliams68202 күн бұрын
how much time do you spend repairing things your crew breaks?
@MorganOtt-ne1qj2 күн бұрын
Stuff happens, and his crew tries to keep the dumb stuff from happening. The auger was damaged by a contract driver. Pobodies nerfect, but his crew works to prevent damage. 😂
@janicewilliams68202 күн бұрын
@@MorganOtt-ne1qj sooooooo you work on the farm or just assuming?
@MorganOtt-ne1qj2 күн бұрын
@@janicewilliams6820 I work on a farm. I have run my own dairy farm. You don't keep people around that screw stuff up, and after watching many of the FFF videos, I can say with 90% odds that the crew is not likely to do stupid stuff. The Hourigan family has hired good people, and have raised good ones that are involved in the operation. Andy specifically said it was a delivery driver that damaged the auger.
@paulprigge12092 күн бұрын
Thank you happy Fourth of July
@dsmreloader75522 күн бұрын
2:22 You got nuts? 🤣
@johndoyle66972 күн бұрын
Hi Andy. Just watched 3 other KZbin channels that i watch. They were in Iowa at a factory tour and Farm testing out the latest from JD. Farming with Zoe did a 2 parter. Laura farms and The millennial farmer all did one video. Ag with Emma and some construction channels covered other equipment. Good stuff coming down the pipeline. Interesting videos. Enjoyed the video .
@MrTonyharrell2 күн бұрын
Couldn’t you cut that dent out, hammer it to shape and weld it back in?
@FarmingFixingFabricating2 күн бұрын
Yeah you could but then you risk hitting the flighting while cutting
@joeykuiperij48062 күн бұрын
Next time pul it and heat it from the outside in with a Torch flame
@FarmingFixingFabricating2 күн бұрын
Would heat bend it back?
@joeykuiperij48062 күн бұрын
@@FarmingFixingFabricating if you heat it from the edge of the dent to the center you pull it back without anny problem sorry language barrier im from the Netherlands
@arkansas13362 күн бұрын
What is the pipe's SDR/wall thickness (not sure how that pipe is spec'd)?
@FarmingFixingFabricating2 күн бұрын
Maybe 10 ga
@arkansas1336Күн бұрын
@@FarmingFixingFabricating...Thanks
@budfisher691618 сағат бұрын
Guess I should have been more patient about talking about the hammer and just watched instead of talk! Sorry. Goo video again ! Thumbs up!
@Mark-cl8pw2 күн бұрын
Slidehammer the next time?
@FarmingFixingFabricating2 күн бұрын
With a magnet?
@gilreynolds92822 күн бұрын
I am glad I wasn’t doing the straightening…. I would have heated the pipe and made a bunch of bubbles
@autocat93712 күн бұрын
What ever happen to your FJDynamics dealership for tractor autosteer ?
@FarmingFixingFabricating2 күн бұрын
I still have it…. Do you need one?i have a demo unit for sale currently
@thewayidoit88952 күн бұрын
ANDY. IF you had any experience welding you'd stay away from that little wheel on your hay head. An Amber from your torch could cause a slow leak in it.
@FarmingFixingFabricating2 күн бұрын
It’s a good thing that I ain’t doing any welding with the torches then
@thewayidoit88952 күн бұрын
@@FarmingFixingFabricating just pulling your leg Andy!
@toddjohnson47232 күн бұрын
Coming from a guy that drives a Ford I agree you don't know what you are doing lol
@FarmingFixingFabricatingКүн бұрын
I have all 3
@steveharrington3012 күн бұрын
👍
@toddjohnson79722 күн бұрын
Where do you get your high moisture corn during the cold months of the year?
@FarmingFixingFabricating2 күн бұрын
We fed dry corn up to this point
@Oliver880-eg8sz2 күн бұрын
Dufus ag would have just sent one of his buddies to get some pizza and duct tape and have somebody else duct tape the auger together