Fixing a Flashing Clearance Light on a 2016 Cascadia

Very easy fix, hope this help you all.

[@linom6178]

Wow nice job brother, very helpful to us as a truckers. I tell you the truth i didn't know where to find that until today. God bless you an all the drivers we're on the road .

[@harislogistics492]

Ronald, Thank you so much for the Video brother. This information and your Tutorial of 2016 Cascadia was spot on. I was about to drive to a dealer and delay my load. This Video saved me money and time. I do appreciate you 🙏....

[@ruffege00]

Driver we all are bro/sis and got to look out for one another. Glad it help. 👌🏾👌🏾

[@troydakingcatchings7617]

Thanks for the video. I am having the same issue right now. This video was very helpful. Going to freightliner in the morning and purchase those fuses

[@johnford453]

Thanks for posting that video. I ran into the same problem I was in the middle of a load and I thought I hadt to reschedule it, so I jumped on KZbin. Brother you saved me a lot of time, and a whole lot of money keep posting.. GOD BLESS!

[@mhdkmohgg]

Thank you so much smart boy you save my day and money I swiped my pndp And light starts flashing Then I check KZbin And found your video That save me bro God bless you and your family

[@jamiegilchrist-oi3tb]

Appreciate the video Driva, I’m gonna take a closer look at those fuses took the PNDB box off but didn’t get a good look plus I need to test those other fuses in there too.

[@deangelowilliam7893]

Thanks driver u helped me out under a load and didn't know what was going on easy fix

[@TruSavage305]

Thanks bro I have the same issue and you’ve been a real blessing💯

[@miguelsanchez3419]

Thank you for your help it really help me thank you.👍

[@josephgardiner9866]

Wow thank you for sharing this video, because my 2013 freightliner was doing the same thing, and I found your video, thanks for sharing 👍 with us 🇺🇸 also on my semi mine is a 2013 its location is under the hood.

[@ruffege00]

Awesome glad it help

[@amrindersingh9618]

Thank you so much brother god bless you 👌👌

[@lawsengh1]

Definitely a great job. Thank you

[@santosgonzalez9195]

Thank u bro you save me trouble and money

[@Mr553896]

Tank brother you save my life I’m fix my problem

[@kilima_njaro]

Many thanks

[@teymurtalibov5705]

Thank you 🙏

[@digadaman]

Thank you very much Sir!!!

[@ruffege00]

Hope that did it..

[@diego-ck2em]

Thank soo much

[@markiki77]

Thanks boss

[@danielxdgarza8123]

Great Video!!! There's a shop trying to break down my whole truck to find issue after fixing my alternator. Said it could take days to do.

[@ruffege00]

Did it work 4you?

[@tbkbaker00]

Dang...my2016 started flashing the windshield clearance and the side turn signals, all other are light up but not flashing.....dash flashing, looked and mine all look good....sam chassis is my next thought

[@Daniel_Harmon]

Thanks for the video, I checked all the fuses in that box you were talking about. Unfortunately that wasn't my solution all my fuses were good. I did bought another fuse to try but that's not my issue.Thanks for the video anyway!

[@ruffege00]

And your clearance light flashing?? Well if you figure it out, please let me know. So I can check mines B4 it goes out. Thanks for sharing.

[@Daniel_Harmon]

Ronald Rutledge I scheduled to go into the shop this morning,so I unhooked from my trailer and I believe it reset itself because all the codes came off! 😁 I'm in awe! 🙂 So ain't no need going into the shop now!

[@Daniel_Harmon]

Ronald Rutledge Are you familiar with the codes resetting after dropping the trailer?

[@ruffege00]

@@Daniel_Harmon its not a reset from my understand of it..only the truck. If you disconnect and the prob stop sounds like a fuse for your trailer and not the truck.

[@ruffege00]

@@Daniel_Harmon the box at 3:43 is for the trailer

[@bigrob232]

BIG 10-4 DRIVER

[@nonaxariis661]

Did you smell like wire burn before you changed fuse

[@ruffege00]

I didn’t smell any electrical wires burning.

[@nonaxariis661]

@@ruffege00 i change fuse still same issue any idea, Thanks

[@makincash3337]

*edit* did it fix it long term?

[@ruffege00]

What are you asking..I don't understand.

[@ruffege00]

Yes, no more issues. As Long as that fuse is good.

[@makincash3337]

@@ruffege00 nice thank you!!

[@johntu1723]

Can you let me know if your truck actually shutdown with this fuse being blown ?

[@ruffege00]

Nah I still was able to drive it..just clearance light flashing..

[@johntu1723]

Thank you I’m actually stuck on the road right now and saw your video to figure what’s going on. The PDM has the red light so I think it’s working cause I could power it on and off from my switch. Do you think it’s the Sam Chassis Module? Can I do that by myself or I also need to reset the computer with it also ?

[@ruffege00]

@@johntu1723 had to replace that boy to, then had to get it reprogram. Had some many issues, can't remember what was happening why I need to replace it. Think I was losing power to..

[@ruffege00]

@@johntu1723 and it was around the same time I had this issue. I put the sam in..it's easy..just got to spend money to get it program

[@johntu1723]

@@ruffege00 my Cummins deleted do you think I’ll have problems reprogramming it does it have to be a dealer or any mechanic could do that and how much was your cost to get it all done ?

[@davidfs.6233]

Part number plz..Thy

[@ruffege00]

Just a fuse. Don’t think their is a part number.