Fixing a Fuel Line

yet another prelude video. here i'm fixing a fuel line with a repair kit instead of replacing the whole line. and i'm sure you'll notice that as the video goes along the replacement line gets smaller and smaller.
You can also follow me here
twitter: @superdelsol
instagram: @superdelsol
BBM channels: PIN
pin: C00120594

[@gyfyasdugcuxjftsdvfb]

Thanks a ton man I just noticed my prelude leaking a few weeks ago in the exact same spot. Made my day when the first GOOD video I watch is on the same car as mine. Vary happy I dont have to replace the whole line because just taking the plastic cover off in order to look at the tank was a pain in the ass. Especially when its friggin winter out here in bc still.

[@mrgimble2]

I've had to do this a few times and I have found that running the hose under hot water a few minutes makes it easier to insert your tube/pipe. Thanks for the helpful video!

[@superdelsol]

Yeah, definitely something I will be doing if I have to do this job again. The thought had never crossed my mind. And thanks

[@rex4x4]

thats a neat little set up ... never seen that before ... im used to replacing the whole thing with new metal lines .

[@HMSFord]

I also had a fuel line leak and looked up repair jobs on KZbin. You made a comment earlier about slowly using a manual hack saw to cut a fuel line. I can confirm that it is possible to cut a fuel line safely with a hack saw if you go slowly. It didn't take very long to do, either. I didn't have to worry about fuel line pressure since the leak took care of that.

[@ctfla1]

Great job!! I had a Ford F350 where the brake line had done the same thing like your fuel line.. I bought it from up north (OHIO) and I can promise you that I'll NEVER buy another vehicle from the snowy areas again... That road salt and calcium chloride just eats metal to pieces...

[@superdelsol]

well i used a small tube cutter, and before cutting anything, open up the gas cap, and what i also did was crack the bolt to the fuel rail to reduce the fuel pressure in the lines. i had to replace the end of the line so when i disconnected a little bit of fuel came out but not much,just have something ready to catch fuel if you need to. and if you go slowly with a manual hack saw i don't think you would create a spark.

[@superdelsol]

well i have to redo a new video because i don't have the other one at all. give me a few days, i might be able to post one by then

[@jhuntosgarage]

Exactly what I needed. Thanks for sharing!

[@smith092]

Cool. Been doing a bit of plumbing around the house, becoming more experienced with it. Done some car work before and I'm surprised how some things they charge an arm and a leg for are really pretty easy and cheap to do yourself. Thought I would draw the line if there was anything to do with the fuel system, but watching you, I was powerfully struck by how much it is like plumbing. So perhaps, now I'd try it myself if I had such a problem.

[@gunforme]

One piece of advice, next time back the car out of the garage before testing it or letting it run. I am not preaching at you. You did a fine job on that. Just better safe than sorry in case there was a fuel leak. :P

[@wodrummerworld]

A local mechanic suggested this and I'm replacing the whole rusted metal part of the fuel line with nylon line, using Dorman line and connectors - as soon as I find my heat gun. The mechanic said they use a heat gun to expand the nylon line so it will fit onto the connectors. Just cutting the metal line at the front and back, where it is still good, and goes into the rubber hoses that go over to the throttle body in front, and fuel filter, in the back. Securing it with wire ties. Be careful.

[@davidmil5022]

very clear, step by step tutorial, thx

[@gthree0239]

Thanks for having your videos monetized. Seriously. Now I remember that I forgot to buy Malibu Rum at the store today.

[@SirYenko_]

If its cold and your having a hard time fitting the rubber, might be a worthwhile shortcut to warm up the rubber a bit with a lighter or torch, it should slip on with ease, then let it sit for a few minutes to cool off. Don't BURN the rubber to a bubbling/melting temperature, just go easy with gentle strokes with the torch to just warm it up.

[@superdelsol]

@Ty Kez good to hear! i'm glad it helped

[@R1200RTGuy]

Nicely done....I was not sure how the connectors assembled/disassembled.

[@superdelsol]

got everything at the dealership, but like i said in the other response i have seen them at other parts stores. and i think one of the comments someone posted a link as well

[@superdelsol]

i just used regular pliers, even though i think there is a special type i'm supposed to use. it still worked

[@superdelsol]

the only difference you should have is that you would need 2 pressure fittings, one for each side of the hard line. but yeah you could just use the nylon with hose claps, you just need to add a flare to the hard line. i wasn't able to do that since i had lack of room and clearance.

[@jackjacke4654]

I would have replaced more of that line as it was quite shot, but you did good work with all the fittings bud.

[@superdelsol]

All I used were a regular pair of pliers. But i think there is a special tool for it. But to this day I still have no issues

[@JiggyFy1Tv]

How do u get the preassure fitting connection attached to the actual fuel line

[@allborose]

Did similar repair on 1996 Saturn. Except it was underneath front drivers door. I think the road salt caused this fuel line to leak at this location.

[@PreciousOpal]

i went to the auto part store to ask about some fuel lines...they told me they had hard lines and rubber hose universal two different size tubes to join the hard lines, anr just regular screw tight clamps...all th fittings is just fancy stuff! thanx for th video, very reasuring what i am going to do in th kind ng is going to be cake!

[@mcqueenfanman]

I would have replaced more then that, should have done the whole line.

[@Romulan112]

+mcqueenfanman With that much rust on that line. I would of done more than that. Entire line or at least back to sound metal line.

[@fishhuntadventure]

Romulan112 ....says one who isn’t in the Rust Belt. Rusty on the outside but that was sound metal imho.

[@superdelsol]

Yeah i found that out myself. I though I would have to replace everything, but just a simple replacement of a portion like that was really easy. But i guess it all depends on the amount of room and placement of the line.

[@euonymus1980]

you could soak the end of the nylon in very hot water. The metal connectors will slide right in. Nice work though!!

[@superdelsol]

I got everything at the Honda dealership. But I'm sure you can get it at any other parts shops

[@superdelsol]

Just slip it on. There is a little brass piece inside it that goes on the line and as you tighten everything it kind of crimps onto the steel line

[@Lamferd]

Thanks for the video, you helped me out big time lol! Any chance you know how long a fix like this can last for or is this a temporary fix that should be replaced as soon as possible?

[@superdelsol]

I'm glad it helped! If the rest of your line close to the repair is in good shape this is a permanent fix

[@superdelsol]

i got mine at the Honda dealership, but i have seen them at other parts stores

[@superdelsol]

sorry should of been more specific but i was running out of characters. its the banjo bolt that holds the fuel line to the fuel rail, but be careful, because if there is still pressure in the line it will squirt out a little so have a rag around in just in case.

[@steelhead197]

I know it’s been forever my friend....but was wondering if you can tell me what the metal end pieces or connectors are called? And what size? You mentioned you picked up from Honda, can ya tell me what to ask for? I have a leak in the same kind and year car, same spot.....any help would be appreciated! Thanks! 🇨🇦🤟🏻😋👍🏻

[@superdelsol]

You are right, it has been a while. Unfortunately, I don't remember the names of the parts. But if you go Honda just ask for brake line repair kit. Tell them what you need. They should be able to figure it out

[@steelhead197]

superdelsol You rock my friend! Ty! 🇨🇦👌🏻🤟🏻👍🏻 Wait brake line repair kit??! Or fuel? Cheers

[@steelhead197]

All we would need is to know the size(5/16”???) of the compression fitting! Dammit! 🤪

[@richardbentz1]

It would be helpful to others if you could specify the kit name & maker and what type of clamp you used, and if clinching it tight involved a special or common tool, it did not look like a common screwdriver type hose clamp. Prelude is Fuel Injected BTW so it's high pressure. Thanks, good stuff. Richard

[@Realdogday727]

Richard Bentz fuel injection clamp's

[@grandpromenade6925]

Good post/video. Helped out...thanks and take care.

[@jonashalasz3812]

anybody know the link to the fuel line kit? Having the same issue in the same area

[@superdelsol]

i got everything at the honda dealership, but i know they have it at canadian tire and probably any other parts store. i did a quick search on the advance auto website and didnt find what i used

[@brian242101]

does this method work for cars as well boss 🙏🏼

[@MrPureSin]

i could use some help. mine is stuck in the connector. so i had to cut the hose :( had no choice. im not really sure how to fix this now. im thinking of running a new hose from the fuel pump to the fuel line. basically what what would i use to connect the two? should i just force the hose over the line and clamp it together?

[@AnimeSqaud17]

I have 1992 dodge Dakota and the fuel line leaking can i use the same black ruber and clamp for my truck

[@superdelsol]

Yes this type of repair will work on your truck. The only difference their may be is the size. Of fitting and line

[@slobodang952]

great vid. did you have any issues using the pressure fitting on a rusted line? I noticed the comment SCREAMING that wasn't a good idea.Replacing the entire line it ideal but not always the easiest decision.

[@superdelsol]

Well I made sure to put the fitting where it wasn't rusted. I've had absolutely no problem with it at all. Still going strong and leak free today

[@TheRedtaz]

+superdelsol hi, is it normal to smell gas for a couple of days after replacing a gas line? i had it replaced 4 days ago and i still smell gas fumes, is that normal, will it fade away?

[@superdelsol]

I'm no expert, but after 4 days I would assume whatever fuel that spread around from the repair should be gone and evaporated by now. To be on the safe side I would take another good look

[@euonymus1980]

By the way I forgot to ask you, what type of pliers did you use to crimp those little clamps?

[@williamquinones1582]

What is that adapter called??? That u plugged into the line coming from the tank????

[@smith092]

Those remind me of the steel clamps you often see on pex used in plumbing. What tool did you use to cinch them?

[@ericcross8361]

GREAT JOB!!!!!!

[@superdelsol]

no prob, glad i could help.

[@gcastillogarcia6102]

Dude next time use some saliva to get that hose inside the fuel line u know its a trick u probably have used it somewhere else LOL

[@superdelsol]

Best comment to this video! Lol love it.

[@hippitymcstribbs4906]

What could that mean? Care to share the "tip" XD

[@tykez6609]

tremendous help!

[@bobpalmer4740]

what is the name of the pipe you used to repair the fuel line? i need to repair some evap lines and they're the same size but i can't find them anywhere, i do not know what they are called thanks

[@Edi-01]

Get the nickel fuel line pipe is the best

[@k33m1026]

Where did you get the pieces to make your repair kit

[@fourashbury]

Is it possible to replace the entire gas line with the nylon line?

[@mistermose1]

Is that a kit or did you have to buy those parts separately?

[@superdelsol]

I was able to get everything i needed from my dealership. They sold it to me as a "kit" but everything is sold individually

[@superdelsol]

yeah i din't know about it myself until i wanted to order a whole new line

[@paulmurphy9902]

DO YOU THINK THAT CACIAM CLORIDE OR ROAD BRINE MAKES YOUR CAR RUST OUT

[@numberpirate]

Where I am from people call them Prayludes, in Vermont.

[@itsyounmesweetie]

yeah, I was trying to figure out what he was talking about! This is the definition of prelude: is a short piece of music, the form of which may vary from piece to piece. The prelude may be thought of as a preface.... once again it's pronounced "Praylude" ...too funny! lol

[@R1200RTGuy]

Dictionary.com says - Prelude is a preliminary to an action, event, condition, or work of broader scope and higher importance. Or, it can be a relatively short, independent instrumental composition, free in form and resembling an improvisation. Looks to me like he got it right...if not, it doesn't matter; I knew what he was getting at.

[@k33m1026]

Where did you get those pressure fittings from?

[@JiggyFy1Tv]

One more question where do you get the equipment? Could I go to Advance Auto?

[@kiwifrise]

Did you a tool to undo the connection ?

[@jcybok]

How would I replace the fuel line that goes to the fuel tank? I have a 2002 Camry xle and looks exactly like the fuel line you have that connects to the corroded one....I have a hole in the line right above the connector...Can I cut that line and attach new line and connector to it?

[@superdelsol]

Jacob Cybok I'm no expert, and not really knowing exactly what you have. You could also just do a rubber fuel line with clamps. I know it's not much help, but I hope it gives you an option

[@UpOnOneStunts]

Hey, Noticed you have Ontario plates. Can you tell me where you bought the replacement lines and fittings?

[@jeffleblanc8850]

Prob Canadian tire in the plumbing section not hard to find I would use a union instead of compression fitting it won’t last I don’t believe he should have got rid of more of the rusted line and used a flare kit then your hose will stay on

[@chanxiong7421]

Where do you buy those kits? My 99 Accord gasline leaking. I need something like that to fix my 2 gasline where the nylon rubber from the fuel pump to the gas lines.

[@superdelsol]

i was able to get everything from my local honda dealership

[@JiggyFy1Tv]

Why didn't you just connect the preassure fitting tube to the new line without the rubber piece

[@kayetlynbrittain8732]

Hey man when you are assembling your repair kit what is the part that connects the compression fitting to the nylon fuel line and then the one on the other side of the line I'm having trouble finding a repair kit for my truck and it's killing me any help would be awesome

[@superdelsol]

+Kayetlyn Brittain unfortunately i'm not much help. i got everything at my dealership. iv'e searched online and all they call them are fittings. if you can't find them locally just try online. i found a bunch. sorry that i'm not much help

[@kayetlynbrittain8732]

+superdelsol like I said before man any help works I appreciate it your video saved me a huge headache! Haha

[@gasdorficmuncher9943]

+superdelsol cna you use a In-Line Fuel Filter for temp repair? www.amazon.com/FRAM-G15-In-Line-Fuel-Filter/dp/B0009H523Y/ref=sr_1_sc_10?ie=UTF8&qid=1460858022&sr=8-10-spell&keywords=gasline+repair

[@superdelsol]

I don't see why not, but usually that's attached with some rubber fuel line. So if you do that mind as well just do the full repair with fuel line

[@eliseocortes0228]

Hi, were you bought the 5/16 steel connector pipe?

[@superdelsol]

i was able to get everything at the Honda dealership

[@eliseocortes0228]

Okay, thanks

[@nicrochefort1]

Where did you get the kit from

[@superdelsol]

I got it from my local Honda dealership

[@nicrochefort1]

@@superdelsol thank you

[@kevinpeterson4098]

What size fuel line? And where do you buy it?? The plastic tube.

[@superdelsol]

Sorry, at this point I don't remember the size. But everything was purchased at my Honda dealership.

[@kevinpeterson4098]

Ok thanks for the reply! I enjoyed your video btw!

[@somejuanschannel9295]

What is the precise name of the repair kit you used, i can't find.

[@superdelsol]

there is no real precise name for it. just a fuel line repair kit. or fuel line pressure fittings, and i think its a nylon hose.

[@timtremblay8601]

Great video thank you done right.

[@karlrobinson8619]

Would this work on pipes under pressure under the bonnet

[@superdelsol]

Karl Robinson yes it would since the whole fuel line is under pressure

[@rex4x4]

remember our conversation at work ? pray-lude

[@johannes6760]

Will this “repair kit” work on the same fuel line but on the filter side of the line? . . I’m talking about the filter side not the pump side. Please help😬😁

[@superdelsol]

it should, as long as you get the right size line and fittings

[@johannes6760]

superdelsol Thanks! I have a 2001 prelude. Do you know what the line diameter is? Heck, do you have the part number for the repair kit you used? 😁

[@superdelsol]

Jo Hannes sorry I don't know either one. But I did get everything at my Honda dealership here

[@superdelsol]

Because unfortunately, the small amount of line was needed to reach. If I didn't have the line I would not of been able to connect it to the stock connector

[@veronicaparks8750]

Thank you

[@superdelsol]

Sorry I'm already out of town and won't be back till tuesday

[@tonyn9858]

thanks for this helped a lot. tony

[@superdelsol]

well i'm not a mechanic, but if it can be used for a portion of the line, i don't see why not,

[@superdelsol]

Unfortunately I'm out of town this weekend

[@kdbI990]

hey man where abouts in ontario are you? i think i have this exact same problem with my lude! but a shop told me it would be a 1-2k repair???

[@superdelsol]

I'm in North Bay. I can only assume that's the shop would replace the whole line, unless it's from the tank. That's a high price

[@kdbI990]

im going to go somewhere and ask them to do what you did, unfortunate cant do it myself at this time

[@dvdfrnzwbr]

Thanks for the help

[@superdelsol]

I'm glad the video was able to help

[@MegaFREEAIR]

Thank u, i just have fucked my fuel line triying to swap filter, in my celica 96,i also love prelude

[@chivone21]

Will this pass inspection with this repair?

[@superdelsol]

chivone21 sorry, that I wouldn't know. But I would assume so. It's repaired and not leaking.

[@Themastermind-bc1oq]

what size are the connectors and the line??

[@MrBossplays]

7mm

[@JiggyFy1Tv]

I will try O'Reilly Auto Parts

[@1232bluejays]

the rest of the fuel lines look pretty rusted also. Why not just replace the whole line or lines?

[@superdelsol]

Be cause replacing everything cost more and is more involved. And also the car was in pretty bad shape, I didn't want to mess with anything else to be on the safe side

[@bobbybrundidge]

How much should a repair like this cost ?

[@superdelsol]

Bobby Brundidge to tell you the truth it's been so long that i don't remember. but i'm sure it was under $75.

[@RiggyRonnie]

The north completely wrecks cars from the bottom.

[@denismaksimchuk4221]

Wow thanks for upload

[@superdelsol]

can i ask why you need me to upload a video of the opener?

[@jody1452]

will his work on a diesel injector line, they are very high psi!

[@superdelsol]

Unfortunately I am no help with this question. I don't know what psi rating any of these components have.

[@MrBossplays]

in the low diesel line Works, but in engine not,

[@LEON-vt8zz]

Hope u have a video for hyundai cars

[@superdelsol]

Leon sorry, but I do not. I only own Honda. But if its for the fuel line, they are all practically the same.

[@gettingtooold9247]

Caused by salty snow?

[@superdelsol]

Yeah probably caused by the large amounts of road salt that they use here

[@xiyu9249]

you can you hair drier , it would be much easier and more snug

[@tasiacollins192]

I have a 94 honda civic, my bf got under the backseat and cut the fuel pump line, how can I repair that longer enough to go get the new line today?

[@superdelsol]

As a temp fix you can use rubber fuel line with a couple hose clamps

[@jayryan5269]

I'd say to suck it up n replace all them rusted lines cuz your just gonna spring another leak later!... Why play with small pieces? Lol

[@jeffleblanc8850]

That’s a shifty fixnwhy not flare it and use a union instaed of a compression fittin they are garbage that will be leaking in no time

[@mikerushing362]

The man said its been going 5 years without a leak sir

[@light487]

Seems like a common problem

[@tangles01]

Wait 300k views for this? Whats sort of trickery is that?

[@dolphintactic1141]

ppl just getting smarter

[@superdelsol]

Thanks! i never though of that, thanks for the tip, but i hope i won't have to use it! haha

[@frankiea8531]

yes i since fix fuel line kit cause im latin haha lol

[@ThomasJoseph315]

holy fuck,.. DO NOT USE COMPRESSION FITTINGS ON RUSTED LINES!!!! OR AT ALL FOR THAT MATTER ON FUEL LINES!!!

[@lgallardo93]

why

[@ThomasJoseph315]

+Lauro Gallardo for many reasons, but basically, they are not reliable and leak.