Fixing a powered speaker amplifier plate - BEHRINGER Eurolive B215d

[@GarretClaridgeMeerkat]

aw cool. I have a pair of the 210d or whatever 10 inch version and other than blowing out the original woofers they have been handy to have

[@Hugo_Foxx]

Merci pour cette vidéo très bien détaillée. Grâce à toi j’ai pu réparer mes enceintes Eurolive B212D. J’avais le même problème. Le même défaut de soudure sur le même composant ! 🙏🏾

[@redking7051]

Je pense qu'il aurait dû ajouter un petit point de colle pour éviter qu'à ça bouge trop, ça a l'aire d'être assez fréquent

[@Hugo_Foxx]

Ok je le ferais sur le mien pour que ça tienne plus longtemps.

[@louisfrancis5567]

good work and explanation what you are given . I face an issue in same unit that is going to protection and remove the TDA7293 it start working , so i replace with TDA7294 (instead of TDA7293) same not switching , how to solve this issue

[@mathfarmer8080]

J'ai une enceinte comme celle ci, lors d'une soirée elle a fait un bruit sourd du style "boom" et après plus rien serait tu de ou provient la panne

[@redking7051]

bonjours, ça pourrais venir de l'amplificateur. Faudrait démonter et tester les hauts parleurs au multimètre pour savoir si ils ont pas été endommagé lors du "boom". Puis observer l'ampli a la recherche d'un composant cramé ou visiblement hors service.

[@captainvontrap7321]

Where can I buy the amp plate solo?

[@retsammototv]

do you have a b212d circuit diagram thanks .

[@Coconutpelau]

Where did you get the schematic? I've had no success with my online search for a schematic for the Eurolive B-315-A powered speaker.

[@cactusstudiossouth]

HELLO EVAH! I noticed that one of my EUROLIVE Powered speakers only had sound coming out of the woofer so I ordered and installel a new Tweeter Diaphragm but when I powered the unit up it's squealed!!! I took it back apart double checked all the wiring everything is in the correct place! Tweeter is mounted in the correct position! There's no smell or anything burning from the Amplifier section! Can you tell me what that could possibly be wrong!

[@redking7051]

If you have an oscilloscope, try to identify were the frequency is generated. (Eq input board, or main board) if you don't have oscilloscope. Try to connect the low and high input of the main board to ground. That way you can identify were the frequency is generated. Tbh, I'm guessing that your power amp Chip might be blown. But not sure about that

[@FyoPlays]

I have that same speaker but mine is completely not turning on, could the problem be in fuse?

[@redking7051]

Sure, check the fuse with a continuity tester. You can also check the path from the plug to the bridge rectifier.

[@ravimatwani4546]

Sir plz sher mi eurolive 215 carcit diagram

[@Marcink126]

Very weak repair. You should already at start measure LF swtiching transistors without plugging it. They are usually dying first. Second is power supply, but then whole amp would be dead.

[@lesliegeorge6366]

"promo sm"