What kind of gate motor is that? It's not a Western Cullen is it?
@RailroadSignsandSignals2 жыл бұрын
No. It is a Safetran.
@htownrep1902 жыл бұрын
@@RailroadSignsandSignals I kinda figured by the looks of it! Good work 👍
@brandedmcgowan9414 Жыл бұрын
WCH is on the opposite side
@warningsystemsofohio18802 жыл бұрын
the gates were just saying hi by waving back and forth lmao
@warningsystemsofohio18802 жыл бұрын
BTW go look at my new post!!! I finally fully restored my Western Cullen Hayes railroad crossing Bell polishing the aluminum!! and it shines like a mirror!
@michigangirl5072 Жыл бұрын
They are kinda friendly though. Lol
@kevinmiller6380 Жыл бұрын
@@warningsystemsofohio1880No, the arms weren't being friendly-it was an earthquake that caused the problem. 😆😆😆😆😆😆
@lizparish9405 Жыл бұрын
@@warningsystemsofohio1880😂😢😢c cmdndm k I’ll nxafelbrfqlc
@DabaNdiaye-zk6tb11 ай бұрын
Q mi fa@@warningsystemsofohio1880
@angeljhown8177 Жыл бұрын
What type of bell is that? (the signal with the malfunction)
@RailroadSignsandSignals Жыл бұрын
A General Signals electronic bell.
@The_Californian_Railfanner Жыл бұрын
Why that sounded like one of those Czech railroad crossing
@Pikachu-h8d11 ай бұрын
At the start that general signals type 2 sounded like a czech bell But when they repeard it souded like a gs type 2
@L22V31_29 ай бұрын
I hear the General Signals type 2 and Safetran type 2
@FloridaRailfanKid8032 жыл бұрын
Did You Replace That Mini WRRS Mechanical Bell With An NEG E Bell?
@RailroadSignsandSignals2 жыл бұрын
It is a General Signals bell.
@FloridaRailfanKid8032 жыл бұрын
Was It A GS Type 1 E Bell
@RailroadSignsandSignals2 жыл бұрын
I am not quite sure.
@theeyum2 жыл бұрын
@@RailroadSignsandSignals it's a GS type 2 (I recognize the sound of most Type 2's now a days so I know)
@theeyum2 жыл бұрын
Most GS type 2s will sound like this if circumstances are right. So this GS Type 2 is basically a Type 3s smaller brother where as the Type 3 is the Type 2s bigger brother. (Please note: Type 3s are now manufactured by a company called Siemens, I do not condone getting one for small railways, more rather for bigger and actual crossings that get used.)
@MichaelMcFerrin Жыл бұрын
Did he reposition that right flashing red light? It's misaligned incorrectly.
@RailroadSignsandSignals Жыл бұрын
Yes, it was realigned.
@MichaelMcFerrin Жыл бұрын
@@RailroadSignsandSignals Good to know......THANX!
@Darryl_Forza2 жыл бұрын
How you getting railroad crossing part and stuff
@RailroadSignsandSignals2 жыл бұрын
I found people who have parts I am looking for.
@Darryl_Forza2 жыл бұрын
@@RailroadSignsandSignals can you get newer railroad crossing gate mechanism or newer light?
@RailroadSignsandSignals2 жыл бұрын
I will use what equipment I can come across.
@thatairliner5 ай бұрын
Bro the bells sounded like those ones from Czech republic lol
@logancerda63679 ай бұрын
Looks like the crossing is having a seizure 😂😂
@proneczarniecki2833 Жыл бұрын
Have you seen a malfunction at the junction causing the crossing gates to freak out??
@RailroadSignsandSignals Жыл бұрын
Yes I have.
@afrika10 Жыл бұрын
@@RailroadSignsandSignals gthghghD🔧🔧🔧
@Pikachu-h8d Жыл бұрын
AT FIRST BELL SOUND BROKEN SCARY FIXED COOL
@restiefiloteo901911 ай бұрын
i love the type 2 bell 😊
@9donald_10douglas Жыл бұрын
At first the signal sounded kinda scary to me but then when it got fixed it was not that scary.
@gabrielamalta2105 Жыл бұрын
69u79
@threepea11512 жыл бұрын
Why is there an e-bell and leds?
@RailroadSignsandSignals2 жыл бұрын
That was what I had at the time when the signals were installed.
@threepea11512 жыл бұрын
@@RailroadSignsandSignals didn’t you have a whole bunch of other bells or something?
@RailroadSignsandSignals2 жыл бұрын
I have a few that need to be restored. I have shown every bell I have in my videos already. The others are going to different signals.
@coolguyisthebest72 жыл бұрын
Did the coil went bad on the gate?
@RailroadSignsandSignals2 жыл бұрын
Yes.
@BenjaminHickman-b2z6 ай бұрын
What type of bell is that one?
@RailroadSignsandSignals3 ай бұрын
Not sure.
@GreenTie763 ай бұрын
NEG-E Bell for the one close to the camera, and either a WCH or WRRS Mechanical bell for the other signal.
@imsolame2085 Жыл бұрын
Kinda Similarity to the crossing at hampton Road in West Palm Beach, Florida
@broo9479 ай бұрын
I love that bell
@VincentTrainsAndGaming Жыл бұрын
It sounds like the crossing is saying hello
@EleanoreChoy4 ай бұрын
yea
@trainchaserelliot Жыл бұрын
0:02 (Crossings) there is totally nothing going on here.
@johnb93944 ай бұрын
Hmmm someone not doing a complete monthly inspection.... adjust the points
@RailroadSignsandSignals3 ай бұрын
I do weekly inspections to ensure the safety of the warning devices I cover. I cannot prevent certain failures as that is just part of signals aging. The reported malfunctions have always been cleared within a few hours of original notice. I can’t do any better.
@glitchy46884 ай бұрын
Clear Device, do not stay gate does want to stay up so it then Replace the clear device with a new clear device 5:04
@itz_coaltonnnАй бұрын
i come across that before while i was drivin on the expressway & them damn things the fuckin gate would lower & raise & lower & raise & them lights flashin like hell & every damn thing else. i didnt know wtf to do. i said "motherfucker is there a fuckin train comin or not!?"
@DJ_FOOD_STAMP2 жыл бұрын
i like this type of railroad crossing malfunctions.
@Indianarailproductions2 жыл бұрын
Q #1) is there a timer thing inside of the relay case that decides how long it takes for a gate to drop? Q #2) how many volts would an average crossing take if it had, 4 incandescant lights, a gate mech and 3 incandescant gate lights? (Its ok if you can't answer)
@RailroadSignsandSignals2 жыл бұрын
Yes, I can easily answer these questions. Q #1) what accomplishes the slow delay for the gates is either a slow drop relay or a solid state board in the crossing controller. The slow drop relays range from 2.75 to 4 seconds slow drop time and you can use two slow drop relays to double the delay time. Q #2) The crossing components use 12 volts. The voltage does not change for how many lights you have or gate mechanisms but the amperage matters. You will need at least 20 amps to run a whole crossing signal (including incandescent lights). (Just a suggestion) I would not attempt to wire up a crossing signal if you don’t know how electricity works as it can easily damage the components you are trying to power up, if it is used incorrectly.
@Indianarailproductions2 жыл бұрын
@@RailroadSignsandSignals Thank you. I currently don't own a crossing or any components, but there is a railroad crossing replacement going on in my area. When it comes to that I'm gonna try to get at least the gate mech. Edit: if you want to see the crossing it is on my video called CSX 3125 manifest or something like that.
@t-meistertanley10222 жыл бұрын
@@RailroadSignsandSignals what railroad company is that worker from
@RailroadSignsandSignals2 жыл бұрын
He is not part of any company. I am teaching him how to maintain the crossing signals.
@t-meistertanley10222 жыл бұрын
@@RailroadSignsandSignals OK. you are totally awesome
@railfannercristian2 жыл бұрын
What about the lights
@RailroadSignsandSignals2 жыл бұрын
I did not bother filming them as it took 10 seconds to shift them back to their original position. I had to do other jobs before it got dark as well and so I did not spend time setting up a tripod for a 10 second clip.
@railfannercristian2 жыл бұрын
@@RailroadSignsandSignals ahh ok
@20thAustinpicturestele944 ай бұрын
Railroad Gates always know when there's a train coming this railroad game is there a train there's not a trained wait there is a train
@jeromehill741110 ай бұрын
Nice fix
@josephwallace72874 ай бұрын
I miss electromechanical bells.😢
@RailroadSignsandSignals3 ай бұрын
Won’t be seeing them for much longer on my signals. Eventually they will be phased out when I get enough replacement bells.
@TravelingRailfan5012 жыл бұрын
What’s with the ebell?
@RailroadSignsandSignals2 жыл бұрын
It is connected to the same relay as the lights. If the lights come on, so does the bell.
@TravelingRailfan5012 жыл бұрын
@@RailroadSignsandSignals what happened to the mechanical bell, just asking
@RailroadSignsandSignals2 жыл бұрын
On the other signal or the previous bell of the electronic bell?
@TravelingRailfan5012 жыл бұрын
@@RailroadSignsandSignals previous bell of the electronic bell
@RailroadSignsandSignals2 жыл бұрын
I removed it so it could be placed on another signal in the future.
@PonderosaRancher330 Жыл бұрын
Good fix there.
@Ploryandyoopfan Жыл бұрын
What did it cause the malfunction
@RailroadSignsandSignals Жыл бұрын
Failed hold clear device.
@Ploryandyoopfan9 ай бұрын
@@RailroadSignsandSignalsthanks
@infunerous666 Жыл бұрын
Put an alligator clip on the bell contact when you’re working on the gate it’s so loud
@nelaserdareviccinderellast84755 ай бұрын
It sounds like Czech Railways Bell
@wildtraingamer31462 жыл бұрын
At least the crossing gates are working good weird malfunctioning crossing
@brandonfrazier10262 жыл бұрын
Great video glad you got it fixed
@jiannaquintero3136 Жыл бұрын
I'm a dictionary and you better believe it
@johnb93944 ай бұрын
Go back to school on how to adjust them properly
@emmanueljames7942 ай бұрын
Infinite ding-dings!! Lol
@Pikachu-h8d Жыл бұрын
Bell was scary until repair
@Pikachu-h8d9 ай бұрын
The mechanical one
@Train_Master_40142 жыл бұрын
Nice video
@jamesmonahanmusic5 ай бұрын
FRIENDLY CROSSINGS 😊
@brandonfrazier10262 жыл бұрын
It’s working out man but on a serious note that’s actually kind of bad
@progenlol Жыл бұрын
He wanted to be a dutch crossing gate.
@Pasco-Spokane-Railfan-20242 жыл бұрын
The hold clear keeps sliding then releases it and the motor pushes it up again and again
@RailroadSignsandSignals2 жыл бұрын
If it was slipping it would be making a ratcheting sound. This time it was not engaging at all.
@ΝΙΚΟΣΠΟΔΑΣ-δ4σ Жыл бұрын
@@RailroadSignsandSignals there was anothe railway malfunction
@topautos Жыл бұрын
Excellent video !
@ClassicClassic-zr9nz5 ай бұрын
Nice video bro
@AudrinaLockwood8 ай бұрын
Just imagine hearing that all night on a school night when you have a ACT test in the morning 😵💫😒. Me: STFU 🤬 I have a ACT test tomorrow morning 🌄.
@molossis Жыл бұрын
imagine getting your finger caught in there
@titanicamerica8160 Жыл бұрын
looks like that day you pointed a light like a side light
@danielbinkley96142 жыл бұрын
It’s got the same motor is The one you’re working on
@schoolbus716 Жыл бұрын
When the video starts you can see the real thing like the gate is going left and back
@HSETM Жыл бұрын
Crossing gates during a Derecho be like:
@FloridaRailfanKid8032 жыл бұрын
It Seems Like The Railroad Crossing Gate Was Trying To Go Down
@RailroadSignsandSignals2 жыл бұрын
It was actually trying to stay up.
@orionharmon60172 жыл бұрын
Isn't it easy to fix a railroad crossing malfunction, or is it difficult?
@RailroadSignsandSignals2 жыл бұрын
It widely depends on what the issue is. A malfunction could be replacing a blown out gate light to having to replace a whole railroad crossing signal. It is usually easy to fix but time consuming to fix issues as finding the issue often takes longer than fixing the issue.
@orionharmon60172 жыл бұрын
@@RailroadSignsandSignals Interesting, I never knew all of that.
@RailroadSignsandSignals2 жыл бұрын
That’s what my channel is for. Learning about railroad signals is my channels purpose.
@orionharmon60172 жыл бұрын
@@RailroadSignsandSignals I'mma subscribe to your channel and hopefully you're posting new videos in order to get more subscribers.
@RailroadSignsandSignals2 жыл бұрын
More will definitely be happening soon.
@chijindueke Жыл бұрын
Note: is not available and broken
@brandonfrazier10262 жыл бұрын
I’m not a professional correct me if I’m wrong I probably am wrong but I think it may be the whole cleared device but I’m not a professional
@Ploryandyoopfan Жыл бұрын
Im gald you fix it the railroad crossing mafunion
@Uk_country8 ай бұрын
Can we fix it?
@RailroadSignsandSignals8 ай бұрын
You (the regular public) have no way of fixing a problem like this one as it requires to replace a specific part that has gone bad on the inside of the signal. It is always best to report a problem or emergency directly to the railroad associated with that crossing as seen on the blue info sign on the signal even if you think that you are able to fix it as chances are, the problem will reoccur after the next activation anyways.
@fivenightsatgoldenfreddys49129 күн бұрын
Yes we can
@Robloxnoob9874 ай бұрын
I don't know how it happened but good fixing the malfunction heart this comment
@David_Gahan2 жыл бұрын
Nice
@mona-spot6 ай бұрын
The NEG bell is great ❤
@glitchy46884 ай бұрын
The train crossing is have a malfunction so old clear Device malfunction is not working and the gate is not does stay up
@danielbinkley96142 жыл бұрын
I’m about to go to Edwardsville to pick up a railroad crossing keep in touch with me this railroad crossing I’m Buying it works
@SamuelElevatorFanAndTrainsMore6 ай бұрын
Fixing A Gate Pumping
@boombox40376 ай бұрын
The opportunity to see inside a railway gate
@SG118P2 жыл бұрын
Whole Clear Was Mess Up
@firesafetyclass29039 ай бұрын
(Hold)
@FloridaRailfanKid8032 жыл бұрын
Great Video
@Pikachu-h8d Жыл бұрын
At first bell sound like it belongs to ohio until repair
@jiannaquintero3136 Жыл бұрын
Helicopter 🚁🚁🚁with you want a normal person to person in this country has the potential customers in your car and then they can also find In 2012 a Boeing 727 was intentionally crashed on the submarine desert
@Milito-16 ай бұрын
How to fix a railway crossing
@fabriciobengozi9650 Жыл бұрын
Now The Railroad Crossing Gate It's Fixed Now
@conraillock6662 жыл бұрын
What caused it I couldn't hear
@RailroadSignsandSignals2 жыл бұрын
The actual cause is still unknown until I check out the hold clear device coils. The electromagnet coils were not engaging with the steel plate so it was replaced with a new one.
@conraillock6662 жыл бұрын
Coils could have over heated
@RailroadSignsandSignals2 жыл бұрын
I know without a doubt that was the problem but I still have to make sure it wasn’t caused by another problem.
@conraillock6662 жыл бұрын
@@RailroadSignsandSignals k
@Wedugaming Жыл бұрын
Bro the tools came out
@2901er2 жыл бұрын
Wow
@ImanRailfans-th4ef10 ай бұрын
woooww😮😮😮
@RailroadcrossingIndonesia Жыл бұрын
Like
@CookieMan_3438 ай бұрын
another youtuber also fixed this one but the blocker fell off and bells were broken and other stuff
@picotuth-qu1tf8 ай бұрын
Why he off and on
@kenpham89586 ай бұрын
Hello Daddy!
@BNorthern94012 жыл бұрын
gate seizure
@transitkidjasonproductions2 ай бұрын
Poor crossing
@picotuth-qu1tf8 ай бұрын
He ok
@kenpham89587 ай бұрын
Messenger Call Anthony!
@johnb93944 ай бұрын
Hmmm maybe go back to school on how to adjust them properly
@L22V31_29 ай бұрын
0:00
@thunderbolt56958 ай бұрын
bro think he is czech railroad crossing
@facundolagresta-rq1fl Жыл бұрын
TBA ALL NCA FESA
@fadhildeniyaputra8118 Жыл бұрын
Kok ada pos PJL nya di negara Amerika Serikat
@fadhildeniyaputra8118 Жыл бұрын
Kamu kan orang AS to makannya kamu diajak ngobrol tidak paham, aku itu pakai bahasa Indonesia karena aku itu orang Indonesia bukan orang AS