Fixing A Speed Queen Electric Dryer That Is Not Heating!

Video covers the most likely causes of why a Speed Queen electric dryer is not heating, including how to test and replace the thermal fuse and heating element. Dryer in the video is model # ADE3SRGS173TW01.

[@DWMASports]

Great video! Thank you! I followed your instructions. No continuity confirmed that my Speed Queen's heating element was the reason it no longer heated. NOTE: I was able to do all continuity tests and replace the heating element by removing only the lower panel, avoiding the hassle of removing the front panel and drum.

[@DuctTapeMechanic]

Awesome! I'm glad I could help! I typically dissasemble all dryers I get just for cleaning purposes, but it is good to know there is a faster way to do it!

[@brinnon9073]

electric dryers need very good airflow, i always check airflow with my airflow checker. while disassembled, i check or replace glides, rollers,tension pulley, belt as its sold as a kit for maybe 15-20 dollars. i love speedqueen but hate this dryer as the sides are floppy and could bend. and yes complete thumbs up for a speed queen commercial top load washer. your exp is obvious and thanks for putting yourself out there in this channel, certainly will help others.

[@derekwhite1262]

Bro you saved me $$$. Appreciate it.

[@MobaCartwright]

Thanks for the video. I did the continuity tests and heating element, fuse and thermostat are all fine. Not getting any heat from my dryer at all. Any tips on what to do next?

[@munchiesNcrunchies]

My control panel seems to be causing problems along with these other related symptoms (bad temp sensing, hit or miss clothes either still wet or absurdly hot, gets stuck on 6 minutes and just infinitely drys. )

[@DuctTapeMechanic]

Seems like multiple contacts in the timer are fused together or burnt out. I would replace the timer

[@NakeshInc]

Congratulations on picking up a Speed Queen. Are you keeping it or selling it?

[@DuctTapeMechanic]

Thanks! I am leaning towards keeping it. If I had the matching washer, that would make the decision a no-brainer!

[@Kristopher1999]

It seems overly complex to spend hours completely deconstructing the entire machine...? Can't you tip it up and just check the element?

[@DuctTapeMechanic]

Unfortunately, this is the only way to test the heating element

[@DWMASports]

I did all continuity tests and replaced the heating element by removing only the lower panel, avoiding the hassle of removing the front panel and drum.

[@trackboy17]

​@DWMASports that's what I did when I change the heating element. Just 2 screws holding it in then you can slip it out