Masterclass in fixing battens to awkward and misshaped walls
Пікірлер: 31
@JoelleSmith-ds1ic5 ай бұрын
Exactly the information i needed, thanks!
@BuildingwithBudd4 ай бұрын
Hope it helped 👍
@harwoods113 жыл бұрын
It was a really well made and informative video. I love that spray sealer/ adhesive.
@MegaBuckfast3 жыл бұрын
Thanks for this very useful video. I’ve got the same problem in my kitchen so I’ll be using your techniques.
@BuildingwithBudd3 жыл бұрын
Hope it helps thanks for watching 👍
@mudboy35823 жыл бұрын
Good video. I've been using liquid nails on gaps between ceiling joists and battens. Firing a nail through once it's dried but it takes too long.
@tlangdon123 жыл бұрын
Great technique and attention to detail.
@jacobherrie6286 Жыл бұрын
Hi, nice work on the battens. I reckon that‘s PUR foam? If there's no cavity behind that brick wall, won‘t you get moisture issues / wood rot? Curious to hear your thoughts. Some more explanation on the foam other than it being rock n roll would've been nice. Thanks for the video
@Nick-qs7lw3 жыл бұрын
Brilliant video I’ll be using your advice!
@BuildingwithBudd3 жыл бұрын
Cheers!
@cleethorphesdave8523 жыл бұрын
Top work and video, very informative 👍
@barkershill3 ай бұрын
Great channel ,watched half a dozen vids already , one question , What is the reason for putting that foam in behind the battens?
@BuildingwithBudd3 ай бұрын
Nothing more than taking the bounce out of the battens and making it more solid, Cheers for watching 👍
@portumnadaz2 ай бұрын
thanks a lot
@BuildingwithBudd2 ай бұрын
You are most welcome 👍
@garykeighley7123 жыл бұрын
Very helpful I’m going to do similar to a uneven kitchen wall 👍
@71fletchirwin2 ай бұрын
You got a sub for "foam ranger" alone
@haydnbrewer74263 жыл бұрын
Nice tidy work space respect
@tommyb5244 Жыл бұрын
With old houses built in 1900 with no insulation. Would you say it’s ok to plasterboard the walls. And long as you drill battens to them first? I seen this somewhere saying it’s the best way to stop moisture penetration. Thought I’d ask a real bricky
@BuildingwithBudd Жыл бұрын
Tommy each situation is different you really need someone you know and trust to have a look and give you some sound advice, sorry not to be more helpful, many thanks for watching 👏👏👍
@robertpoffel3733 жыл бұрын
Great content. Thank you. I feel ill now though from motion sickness.
@freezefoot2 жыл бұрын
Thank you for your video.If you were tight for room e.g small bathroom/shower room and just wanted to level up wall with battens and packers how thin could the battens realistically be?
@BuildingwithBudd2 жыл бұрын
To be fair I wouldn’t want to go any thinner than 20 mm, hope this helps and many thanks for watching 👍👏
@freezefoot2 жыл бұрын
@@BuildingwithBudd appreciate your reply
@proggydan825710 ай бұрын
How do you fix the actual battens to the brickwork?
@Emy1g3 жыл бұрын
Great video! What foam do you use and how long do they last?
@meaningfulmakingsАй бұрын
Please come to my house. 😂
@AJ-ds5gf Жыл бұрын
waste of time battening out walls. Dot and Dab, with a few mechanical fixings, is the way to do.
@Lc-is8vn Жыл бұрын
Try dot and Dab on a 100+ year wall, where the moisture travels through the dab and you're saying goodbye to the boards in no time. This technique is a must in those situations (my situation)
@kingofthetrowel1725 Жыл бұрын
@@Lc-is8vn spot on mate was just about to reply with same. People think you can dot and dab anything but it’s not the case, I had to go do a job at an old barn where they had dabbed all boards onto the old stone external walls and the moisture had just pulled through and obliterated the plaster board, ended up studding it out with a vapour control layer and pb 👍👍