Fixing lights on Fiat Ducato by changing the centre column switches

[@jackwex]

Thanks for that video, I have a Euramobil 690 Integra, smaller brother to yours The exact same issue happened at the weekend, though it was the replacement HID lights I fitted , caused a fuse to blow. As driving home in daylight did not need to repair until I got home. So I googled and your video came up☺️. Sorted it today, the exact same issue, so crimped the connectors and all is well. I have one 100a lithium battery with 460 solar bank, Victron MPPT and Victron inverter. The Bluetooth apps are great. Also have a single 100w panel and smaller Victron MPPT and inverter in garage for charging electric bikes and other non essentials. Love the Euramobil's , had an 810 like yours year's ago when the kids were small, went all over Europe. Great machines. Finally watch your video on sky light replacement, going to do same in mine as old ones are tired. Great channel , will recommend you to club in Ireland. Keep up the good work.

[@offgrid_power]

Glad it was helpful! :)

[@Jonk3738]

thank you so much for this you have saved our holiday! lights packed in, 2 days before our European tour, tried fuses/relays to no avail, and couldnt get a sparky/garage to look at it in time! then I found your vid and that was it fixed!! thank you again

[@offgrid_power]

Glad it was helpful!

[@VanlifewithAlan]

Thanks for uploading - I have the same problem - lights not working and I have been waiting for the part for ages. I presumed that the body control module needed replacing but if it is that easy, maybe I don't need to go to the garage!

[@Plane2TheT]

I have the same issue, if you follow the wires from either rear light cluster you will find junction boxes both sides hooked up and wrapped up along the chassis. Remove the clips by snipping and then unwrap the tape and you can then use a multimeter to test each wire with lights on you can see what is getting power, a few of mine like brake light and fog were getting power up tk the box bt not up to the light so I snipped and by passed the box and now have those lights working. Only problem I have now is the drivers side rear indicator isn't working and the blinker is flashing fast on the dash, front and side indicator working and bulb for the rear is fine too. I have by passed the box as I have power and it still isn't working also have power to the cluster for the indicator as I tested with multimeter (this jumps up and down in volts as the light flashes which matches the volts jumping on the good side passenger indicator works) what could possibly cause this as I have also removed the stalk and cleaned the contacts for all lights and washer wiper side. Ahhhhhhhh any ideas people?,

[@strawtoro]

Excellent tutorial, I'm having a similar problem, lights only work when I push up lightly the lever, but I would have to hold that position in order to keep it working. I've already replaced the column steering switch 5 months ago and the problem has come up again. Now my problem is can't find a spare column steering switch, it's out of stock for all suppliers :(

[@offgrid_power]

Hope you find the right part soon!

[@johnomalley]

How did you remove the Steering wheel cover ! my wipers won't work so looks like i mat need to change my stalks, can you tell me where you got the replacement

[@drhardlove]

Thanks for sharing. Helpful. 🙏

[@DuskoLepir]

I have similar problem, every single light is working except low beams or main lights however you guys call it. All fuses and relays are good. What can cause such problem?

[@VanlifewithAlan]

If it is not the problem described here, it might be the body control module.

[@mrrickybarnes3454]

I have an 05 plate camper got another light stalk ect still no good . Got electrician he found out the fuse box burnt he by passed it and all good