FIXING - Metal Shrinker & Stretcher | Adjusting & Fixing!

  Рет қаралды 11,065

PERSSON ́s garage

PERSSON ́s garage

Күн бұрын

Пікірлер: 26
@blakegaddis946
@blakegaddis946 4 ай бұрын
Nice video. I've seen other fixes that didn't give results, but yours is definitely the best!
@perssonsgarage
@perssonsgarage 4 ай бұрын
Thanks! 👍😊
@garymucher4082
@garymucher4082 Жыл бұрын
I bought a used combo set off a guy on Ebay. It was the type where you had to change from stretcher to shrinker setup as you needed them. I decided to just make my own jaw holder and did just that so I could use one for shrinking, the other for stretching. Then powder coated one red and the other blue and made a floor stand for them. They work great now and you can use one or the other without swapping out anything. Not hard to do... Thumbs Up for your repair of yours...
@perssonsgarage
@perssonsgarage Жыл бұрын
Making your own Jaw holder is well done! Even though mine didn't work at first, you can't buy the material any cheaper, so I'm happy even if I had to rebuild it. Thanks for sharing!
@BSMikkel
@BSMikkel Жыл бұрын
Well done and really helpful, thanks!
@perssonsgarage
@perssonsgarage Жыл бұрын
Glad if the video can help!
@NigelWoods-u6v
@NigelWoods-u6v 2 ай бұрын
Great vid have you tried shrinking 18 gauge steel with it.
@Ryan67rs
@Ryan67rs 4 ай бұрын
Great video! What gauge sheet metal in the video? Thanks.
@perssonsgarage
@perssonsgarage 4 ай бұрын
Thanks! 10mm = just over 3/8 inch or 1,8 gauge.
@robertlangford350
@robertlangford350 2 жыл бұрын
Hello. Do you offer to make and sell the parts in this video for the shrinker/stretcher? Thanks Bob
@perssonsgarage
@perssonsgarage 2 жыл бұрын
Sorry, I'm not selling anything, but I hope this video will help others who bought a shrinker/stretcher that doesn't work, to work as it should.
@user-sk5cv7hj2m
@user-sk5cv7hj2m 2 жыл бұрын
What a pain in the ass! Good job fixing it man🤟
@perssonsgarage
@perssonsgarage 2 жыл бұрын
Thanks!
@phuongie2227
@phuongie2227 7 ай бұрын
Gia bao nhiu
@ПасенкоФедор
@ПасенкоФедор Жыл бұрын
покажите это видео производителям.. изначально надо делать хорошо show this video to the producers .. initially you need to do it well
@biryaniofbodyhair
@biryaniofbodyhair 2 жыл бұрын
Nice man well done, I have shrinker/stretcher coming from vevor and knew I'd have to make some adjustments, this video will help greatly
@perssonsgarage
@perssonsgarage 2 жыл бұрын
Thanks! As long as the price is right, you can put in the time and get this shrinker/stretcher from Vevor working perfect!
@patrickmoore8428
@patrickmoore8428 Жыл бұрын
I would send the device back and ask for a working version.
@perssonsgarage
@perssonsgarage Жыл бұрын
I bought mine very cheap directly from China and therefore it will be too expensive for me to send it back. Had I bought it in a regular store, I would return it and asked for a working version.
@paulnewton943
@paulnewton943 Жыл бұрын
So why is it called a shrinker stretcher if it is just a block of bits. Reminds me of the Chinese wheels I bought. After many modifications it's now almost a English wheel. 😂
@ToreDL87
@ToreDL87 5 ай бұрын
I looked at those, ended up with precision machined wheels and made my own chassis, still came out 300£/$/€ cheaper than the Chinese cr@p too.
@patrickdoherty8701
@patrickdoherty8701 5 ай бұрын
Vevor not fit for purpose
@jaybushman4158
@jaybushman4158 Жыл бұрын
OMG, we dont need to see 10 minutes of grinding and polishing metal, I know how to do that. Lets see how it fits and works
@perssonsgarage
@perssonsgarage Жыл бұрын
Some want to see the whole process, others don't. In the description, you can always jump directly to the finished solution and see how the result turned out.
@AA-69
@AA-69 2 жыл бұрын
😴😴😴😴😴😴😴😴😴😴😴
@tonytribisonna9886
@tonytribisonna9886 Жыл бұрын
I had the same problem with this Vevor Chinese shit absolute junk and a waste of money. I purchased Lancaster made in USA 🇺🇸 and it works great don’t waste your money buying cheap Chinese shit.
Everything wrong with import shrinker/stretcher machines
30:55
Throttle Stop Garage
Рет қаралды 35 М.
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
EASY FREE DIY SHRINKER TOOL! HOW-TO Make CURVED FLANGES on SHEET METAL
48:37
How To Fix The Vevor Shrinker/Stretcher
15:33
Built at Blackjack's
Рет қаралды 467
How to use a shrinker / stretcher tool to fabricate a rust repair patch : Charger restoration
7:55
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 43 М.
Sheet Metal Shrinker Stretcher Tune-Up 2014 Update
9:05
lazzemetalshaping
Рет қаралды 81 М.
Shrinker/stretcher fix
10:03
MrFireman164
Рет қаралды 1 М.
Shrinker Stretcher Explained - Basic How To
12:38
HotRodHippie
Рет қаралды 25 М.
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН