Fixing Peep Rotation

[@Thedudeabides803]

I separate the string half way between the peep and the top cam and around one strand I tie about 8 over-under knots so I have a ball of thread I can grip with my fingers. You can slide it up or down and it will finely adjust the peep. I like this because if the peep ever starts turning, it’s really easy to fix.

[@Alan_Edwards]

I like this idea. I am getting real frustrated so going to give this a try. I'd rather not swap strands of string if I can help it.

[@MBwelding]

They sell a peep tuner that does basically exactly this but serving a slider knot I like better

[@moonlighthomestead4259]

Gave this a try. Followed your instructions and it worked well. Thanks

[@justmeva]

That actually make a lot of sense: thank you for sharing this information.

[@milkrvr4088]

Does anyone just add a half twist to the string to bring peep around

[@carypeaden4147]

I wish the resolution of the video was better. I have trouble seeing the detail in his drawing on his white board.

[@josephfolsom2030]

I used to do that, but there is a slight issue with doing that. When you move 2 strands or 3 or whatever from one side to the other, unless you have 2 sets of hands to keep track of which strands you’re moving because they will mix with the other side you’re moving them to and vise versa. Also you stand the chance of breaking strands no matter how good those said strings are.

[@Alan_Edwards]

Interesting,. I have a peep that is just slightly over-rotating to the left, so twisting or untwisting the string would be too much of a correction. Going to give this one a try tonight. Thanks !!

[@jrd8640]

I used to use really cheap bowstring and nothing fixed the rotation. Even if it looked straight, it would be turned at full draw. Ever since I started using high quality bowstring, I haven’t have problems since.

[@tylernegron4131]

My factory elite strings were not great they where ok but still had peep rotation about a 1/8-1/4 turn as drawing. Winners choice after market may be better

[@really559]

wow... thank you so much for posting this.

[@tecate9408]

Been using lip to orient peep on all my shots, just gotten used to it. I love the haters.

[@donlucas3462]

great video..good info

[@davyjones922]

What happens if the strand method moves it further than needed? . My peep is ever so slightly left that moving one strand tweeked it slight right. Ive been using the dloop tweek method but id just like for it to be perfect without. Lol threads have maybe 500 shots on them so they are still like new. 😁

[@brutallyhonestmf5578]

Try the string silencer method. Way easier and adjustable.

[@brutallyhonestmf5578]

kzbin.info/www/bejne/hZqrmIuDlseZfqM

[@jatollar]

Just slide the peep slightly up or down until it is facing straight back at full draw. The peep will follow the way the string twists. I tried the silencer method and it seemed like the peep settled back after a few shots. Moving strands to either side didn't work very well for me either.

[@jasonmills9158]

You shouldn't do this if you like where your anchor point is. Moving the peep will change your anchor.

[@leighshevill6011]

Funny how I end up watching a video on fixing peep rotation on a set of Winners Choice. And half the video is promoting Winners Choice. 🤣🤣🤣

[@FPChris]

Yep.

[@cmack003]

Wasted time

[@42fingerz]

If you have a press, why would you opt for this rather than a half or full twist? This method is wayyyyy longer.

[@brpnw4r94]

Why not put a damn bow in a press and teach the viewer that way. Might as well be using a projection screen and shadow hand puppets.

[@rorynelson7548]

Hahahahah

[@JohnSims3]

Just get rid of the peep with a Peep Eliminator!

[@paulcrans804]

How does moving even amount of strands in opposite directions solve anything? You still end up with the same amount on both sides The strands you pull over the front twist it back and then the ones you pull around the back turn it right back to where it was.

[@paulcrans804]

While you have it in the press just put a tiny twist in the string. Problem solved every time.

[@royleerobinson5]

I would say it’s because of the twist of the strands. And the way they are bunched then split in half. This seems like a good way to micro tune that twist.

[@potshot23]

Was doing this in the 80's before fastflite..

[@johnwalter564]

Winners choice do not rotate though. As advertised. It’s all I use and put n customers bows

[@gandalf2256]

Wish this wasn't filmed with a potato. Thumbs up anyway.

[@yuri_lhr]

"How to fix video quality recording"

[@lyon666]

Dude he recorded it with nothing but a peep.

[@bull5919]

SMFH ITS 2020 AND HE IS VIDEOING IN 240PI SMFH POOR QUALITY ASS VIDEO