To anybody who’s wondering if this works, yes. It works a 100%. This might be a typical problem for this type of car.
@mrmusclecarsuspect53623 жыл бұрын
Thanks for the positive feedback and support!
@cc40053 жыл бұрын
Can confirm as well! Replaced my battery yesterday and had this problem. This helped fix it
@mrmusclecarsuspect53623 жыл бұрын
@@cc4005 thanks for the feedback and support!
@willpghustler26363 жыл бұрын
I have a Mazda 2004 brand new battery for it it needs a Jump start to start IDK what the problem is
@mrmusclecarsuspect53623 жыл бұрын
@@willpghustler2636 if you replaced the battery and it needs a jump to start most likely your alternator has gave out or is giving out. Your local auto parts store can test out your alternator and battery for free.
@annetteedwards43085 жыл бұрын
After having issues with this and having been told to replace this and that, i tried this video and it worked perfect. Car runs like new. Thank you so very very much. Im one happy camper cause i love my car.
@mrmusclecarsuspect53624 жыл бұрын
Annette Edwards I’m glad I can help sorry for late reply for some reason I didn’t get notified on the msg thanks for your comment and support!
@FeniXMoments Жыл бұрын
I can confirm this fixed the problem. Same situation, changed the battery and the car was idling very rought.
@Seifer0075 жыл бұрын
Thank you very much for this sir. I appreciate it! Very helpful
@mrmusclecarsuspect53625 жыл бұрын
Seifer007 no problem I’m glad I can help
@victoriousmax755 жыл бұрын
that metal on metal sound at the moment of ignition @2:10 is nasty. my friends mazda does it too. I"m sure is no good. my mazda 5 does not do it.
@scooptpoop Жыл бұрын
Mine does too lol
@KollynJ2 жыл бұрын
Did this repair last? What about problems with spark plugs and ignition coils with these
@jayspring18134 жыл бұрын
Throttle body forced limit, speed sensor for abs will do it to.
@jordanshoemaker82785 жыл бұрын
YO so,my 07 2.3L mazda 3 doin this started like within 24 hours after an oil change, I think there was a little extra oil put in too. But the battery was never replaced and it usually starts ok but it still will crank and crank so ill stop put it in neutral an pump the gas. But then it'll sometimes make a grinding noise when it starts up. Also ive noticed I think it happens when downshifting quickly but the oil pressure light flashes and it'll make the same kind of grinding noise. Check engine light on for o2 sensor 1 bank 1. All kinda spring up on me real fast
@mrmusclecarsuspect53625 жыл бұрын
Jordan Shoemaker you can Diagnose were the sound is coming from if it is coming from the driver side/or passenger side of engine and it makes a grinding noise like metal to metal grind you might just have a bad cv axle had a customer bring his Mazda 3 and I checked it if you go under the car and grab the cv axle and your able to give it movement it’s bad and sometimes it can have the rubber part torn and that causes the issue too. Check it out and make sure to have a jack stand for safety on the bottom of the car if you got more questions feel Free to ask.. I hope 🤞 I was able to help
@jordanshoemaker82785 жыл бұрын
@@mrmusclecarsuspect5362 funny you should say that, I knkw the driver side cv Adel was literally just replaced like less than a month ago but its continued to do that. Not to certain where the sound is coming from now that I think about it, but ill listen and ill get under there and look
@mrmusclecarsuspect53625 жыл бұрын
Jordan Shoemaker ya it’s always good to make sure it’s not the same part bc sometimes parts do come out faulty & always make sure to grease up the part when installing . If the sound does come out from from same area wiggle the part and see if there’s any movement or move parts around to see. Wats moving while car is off tho
@christopherwood49603 жыл бұрын
Great video i have a 2008 mazda 3 mind now randomly stalls out and dies when i turn it seems to happen the sharper the turn but it does it both ways..its random as hell though. Car sounds pretty good.
@BeboBlendz2 жыл бұрын
THE SAME THING HAPPENS TO ME !!! Same year and model . My car will just shut off , got in a accident because of it
@Mr33445555 жыл бұрын
What if the Mazda stalls when you leave it running? Restart it and keep the timer going or restart the timer itself with the car?
@mrmusclecarsuspect53625 жыл бұрын
Mr3344555 do the process if it keeps doing it try disconnecting the negative terminal for about 5 to 10 min reduce process and make sure you drive it around for about 10-15 min it should fix the issue if you got any more questions feel free to ask thanks
@armandotrujillo83462 жыл бұрын
Try food mode fr Ford (,manufacturer) basically Mazda . They came out n said to stop the rattling on some of the cars and also to prime oil filters with the cars system. Don't do it by hand. . When u turn on car keep gas pedal mashed in to the floor to oil and prime the oi syste.. giving more lubrication and reducing wear n tear wear it matters most . at start up . Once u release the pedalthe car will turn on allowing for a better start up.quiter safer etc...again from the manufacturer not some bs I made up
@theoldfart4545 жыл бұрын
can you do something on a o2 sensor for this same car ?? i was getting a p0134 code came to conclusion needed to replace o2 so now I have a new o2 but a different code came up P2195. looked this up and I cant figure out how to fix it ant ideas ??
@mrmusclecarsuspect53625 жыл бұрын
rich fan clean out your MAF sensor with some cleaner and your throttle with some throttle body cleaner see if this helps then delete your code and try running it again if it continues diagnose code again then lmk if you need help again.
@joeywitt71296 ай бұрын
Did u ever figure out what happened my Mazda 3 is doing the same thing
@drunkwithoutdrinkingalcoho47163 жыл бұрын
I changed by battery and the idol is weird now and my car will act like it's peering off and the screen will say goodbye and the dials will go side to side ...but the car is still running??? I don't know anything about cars but I assume maybe it's not the right size battery for my Mazda 3
@mrmusclecarsuspect53623 жыл бұрын
So when u replace the battery u need to go threw the realering procedure that om this video so the computer relerns the idle.
@lednhojoicangi82375 жыл бұрын
Same here the rpm is up and down if i turn on the a/c, but when i turn off the a/c the rpm is stable
@mrmusclecarsuspect53625 жыл бұрын
LEDNHOJ 21 try this method same thing would happen to a buddies 07 Mazda 3 he tried this process and it helped
@mrmusclecarsuspect53625 жыл бұрын
LEDNHOJ 21 if that doesn’t work look for a vacuum leak When the vacuum system leaks, it allows extra air to enter into the combustion chamber this air allows for a slightly higher combustion, increases the RPM it would bring up a code
@frospalo4 жыл бұрын
I actually did this to my 2010 Mazda 3, except for letting it idle for 15 minutes with AC on. I just let it idle for 20 min with no AC and then drove off. The thing is that now my idle is good with or without AC, but when driving with AC on in lower gears (especially 1st gear), my rpm will drop heavily and car will slow down as soon as i hear the AC compressor kicking in (I know cars, especially gasoline cars, lose lots of power when compressor starts, but this is too much). Do you think redoing the procedure and let it idle with AC on would help with my rpm drops while driving, or that is just for bad idling?
@mrmusclecarsuspect53624 жыл бұрын
C Calin I would t disconnect the battery for about 10 min and do the procedure as shown on the video and wait until car idles at normal rpms once produce is complete then take it out for a spin.. yes all cars when running with AC on it’s using more power so will reduce a bit but it’s not noticeable.. if you got more questions feel free to ask sorry for late reply!
@frospalo4 жыл бұрын
Mr MuscleCarsuspect Thanks for your reply! Sure thing, i’ll redo the procedure as you’ve shown in the video. I guess it’s best done when the engine is warm as Mazdas have a much higher rpm at idle when engine is cold. Thanks again!
@mrmusclecarsuspect53624 жыл бұрын
C Calin no problem I’m glad I can help lmk if u got any more questions thanks for watching!
@audenciatitha35904 жыл бұрын
This is a same problem I have but I was at one garage but their telling me that my car has a problem with valve, can you help me out to know whats the problem because I really don't believe these guys. Because I only changed the head gasket after all it start doing that..
@mrmusclecarsuspect53624 жыл бұрын
Try this process and see if it fixes your issue if its just stalling and running rough it should be as simple as doing this process.. sometimes shops will lie to you to make money out of your pocket.. who replaced the headgasket them or yourself?
@Yoav764 жыл бұрын
My 2015 Mazda 2 has a rough idle, but I did not replace the original battery yet. Do you know what I can do to resolve this issue? Should I disconnect the battery and reconnect it? What is the process? Thank you!
@mrmusclecarsuspect53624 жыл бұрын
Yoav Traeger you can try this prices sometimes it tends to work.. but if your having rough idle it tends to be the MAF sensor or IAC, you can buy mass air flow sensor cleaner/ cleaners to clean you MAF and IAC sensor and also clean out your throttle body with throttle body cleaner it will help out a lot and you shouldn’t have the rough idle after that. MAF sensor give it 10-15 sprays let it dry for around 15 min then reinstall it. Let me know if you got more questions!
@Yoav764 жыл бұрын
@@mrmusclecarsuspect5362 Thank you. I was hoping for a simple solution. By the way, this car only has 46,000 KM (28,500 miles). I'm pretty disappointed.
@jonjonsquad4 жыл бұрын
@@mrmusclecarsuspect5362 I dont think electronic throttd body has IAC since it's all computer controlled.
@GagMyBullets2 жыл бұрын
So my rpm’s just around but I’ve done this procedure multiple times other then I’ve replaced the battery I havnt done that in 1-2 years but my idle does surge roughly any more tips since this video?
@albertobenavides5939 Жыл бұрын
I recently changed both cv halfshafts and my car suddently started stalling, it stalls when in drive and press accelerator also it dies out when driving then shut off for a.minute and then works again bit keeps stalling.
@josem7935 жыл бұрын
I haven't changed the battery but sometimes the rpm fails whenever the car stops(Brake) or goes slow the rpm would sometimes go off when I do these things in the car in order to let it go again, i need to chage the gear from Driving to Nitro or Parking and restart the car. over all, the car treats me good it runs great I just want to know what's going on with all the stalling that's been happening often the vehicle was bought used and it's my first car so I don't know much about the problems It could have or if their servere problems. The AC doesn't work by the way.
@mrmusclecarsuspect53625 жыл бұрын
Jose Macias can be a simple camshaft sensor you can check it by tapping it with a hammer wile it’s running if it dies when u tap it that’s your problem.. best thing to do is check it for any codes your local auto parts store should have. A scam took so u can scam for codes can be your not getting fuel pressure or can just be the simple camshaft sensor. Let me know if you got anymore questions.
@ankkerso4094 жыл бұрын
@@mrmusclecarsuspect5362. I am having the same issue as Jose. Engine stalls when idle. Engine light is showing as P2173 code. Went to a few garages, replaced knock sensor, repaired oil leak, still having an engine stall. If i step pedal a bit, rpm 1000, no engine stall. Any advise?
@mrmusclecarsuspect53624 жыл бұрын
@@ankkerso409 Code P2173 is set by the PCM when high air flow is detected in the throttle actuator control system. This code can be related to a Throttle Actuator Control System malfunction, but it is possible that another issue is setting, try cleaning out uour throttle body and maybe this process as well if this dosent change anything let me know if you have more questions..
@melikhayabetana58534 жыл бұрын
My car doesnt pick up speed it goes slow and even slower after jumping a hump
@ahmada16295 жыл бұрын
Do you need to remove the battery and wait a little bit before doing this?
@mrmusclecarsuspect53625 жыл бұрын
A Agha usolly it happens when u replace the battery. If you replaced it before and it started to do the same thing try this it should help. And you can still try it if it’s having the same problems. Let me know if you have any more questions.
@nilsonfeliciano74955 жыл бұрын
Great video
@mrmusclecarsuspect53625 жыл бұрын
Nilson Feliciano thanks glad you liked it
@waticanfly5 жыл бұрын
How about in my cars case i would have the put the relay in just to get a/c or heat? It only goes at full blast.
@xtremegaming36352 жыл бұрын
2005 Mazda 6 runs when cold and once it’s at temp and it idle it stalls
@jackquilter36502 жыл бұрын
I have same issue
@xtremegaming36352 жыл бұрын
@@jackquilter3650 did u ever fix if u want I can drop my number so we can talk
@stephaniefabila52866 жыл бұрын
I got a new battery 3 months ago and the rpm been going up and down ever since .. will it still work if I retake the battery out and let it run like the video ???
@mrmusclecarsuspect53626 жыл бұрын
Stephanie Fabila yes remove your battery for like 10 min then re install it and do as the video says should work if you still got the issue lmk il be glad to help
@casanovaevren6 жыл бұрын
My mazda3 was stalling and stopping at lights after battery disconnected..then i drove it on highway about 20 min and idle got smooth again ...so stupid
@mrmusclecarsuspect53626 жыл бұрын
casanovaevren yea you’re u got a run it for a bit so it get back to its normal idle you can do the steps and it should work but if yours is good now that’s great to know
@casanovaevren6 жыл бұрын
@@mrmusclecarsuspect5362 ok today drove it no problem i let u know of it stops again if it does i ll check vacuum leaks as well.
@mrmusclecarsuspect53626 жыл бұрын
casanovaevren yea if u do these steps it shows our fix the problem. If problem continues can be something else.let me know if you have the problem again and have any questions I can answer
@Grey-graciee Жыл бұрын
My rpms are stuck at 2 and my car stalls and shuts the radio off and turns itself back on
@vanidonbalisi53733 жыл бұрын
May mzda 3 1.6 model rpm is the same with the ac on aroung 1000k rpm is it normal?
@rangaweerasekara3 жыл бұрын
if its nessasary happend after reset the battery? or only replace
@dumbninjah48852 жыл бұрын
i’m gonna try tomorrow after i installed an amp my car started stalling
@dankcityclothing11264 жыл бұрын
mazda gang
@mrmusclecarsuspect53624 жыл бұрын
DankCity Clothing 😂💯👍🏻 yup
@andychiwas4 жыл бұрын
Will it work on a 07 speed3??
@mrmusclecarsuspect53624 жыл бұрын
Andy Lopez yes try the steps lmk if you got any more questions
@natelawrence24295 жыл бұрын
I have a rough idle and code p0507 without changing the battery, and suggestions?
@mrmusclecarsuspect53625 жыл бұрын
Nate Lawrence You can start with looking for a vacuum leak When the vacuum system leaks, it allows extra air to enter into the combustion chamber this air allows for a slightly higher combustion, increases the RPM and throws the code.p0507
@natelawrence24295 жыл бұрын
Mr MuscleCarsuspect great thanks man, should I just spray like water around on the connections and look for bubbles?
@mrmusclecarsuspect53625 жыл бұрын
Nate Lawrence I would grab a vacuum line and blow smoke into the vacuum line and watch were the smoke escaped usually you use a smoke machine but u can use smoke just blow smoke In with a cigarette/cigar
@scottodudu99633 жыл бұрын
My 2005 Mazda 3 speed meter not working. How do I fix it please?
@tawandamuhamba2371 Жыл бұрын
Did you change your wheel bearing?
@joshuariddle77403 жыл бұрын
So, I’ll start from beginning to end if anyone can please help me out… Belt snapped on mazda3 2.0 2009, I replaced both belts. Noticed the overflow tank had a small crack in it, cause it did get hot when the belt broke. Anyways, replaced the overflow.. then, noticed it was leaking from the coolant water outlet. Never heard of that thing until now. So, replaced the water outlet, put everything exactly back together how it was, yes it did include taking battery and the battery box out. But now, it keeps dying on its own. Now I’ve noticed when I turn the wheel all the way in either left or right direction, it dies. Steering wheel and “!” Light comes on for a second. The “abs” light comes on for a second too. I don’t understand? Is this just the case of…”fix one thing, another thing happens right after”? Cause bro I’m so pissed. Gonna look at it more tomorrow.
@joshuariddle77403 жыл бұрын
Also, had to jump it off with my dumptruck… my headlights and everything go dim and stuff as if it’s the alternator, but it mainly does it, then it dies, when I turn the steering wheel.
@patrickkeenan10314 жыл бұрын
I tried this and it ran fine but the next day it was stalling again.
@mrmusclecarsuspect53624 жыл бұрын
Patrick Keenan refueled the process but this time drive it right after for around 15 min then come back let it sit for another 15 min
@eliseopagan36985 жыл бұрын
After you do that you'll run out of gas before driving it around
@mrmusclecarsuspect53625 жыл бұрын
Eliseo Pagan I haven’t had that happen to me run out of gas lol but I do have a gas station just 2 blocks away so I would be good it’s always good to have a full tank before doing this tho
@eliseopagan36985 жыл бұрын
@@mrmusclecarsuspect5362 lol. Messing around, appreciate your response tho. much love bro
@mrmusclecarsuspect53625 жыл бұрын
Eliseo Pagan lol appreciate the comment and sense of humor bro 💯😂😂
@idanazani80643 жыл бұрын
Hi , i have a 2006 mazda 3 hatchback automatic , 2.0L , i got problem with my transmission when i put the gear in R - its make a hard noise from the transmission.. do you know this problem? Ty..
@mrmusclecarsuspect53623 жыл бұрын
Sounds like your transmission is ready to go out. The best you can do is probably drive it wile you can and maybe if its worth it get another transmission it be cheaper thann rebuilding it. A used transmission works just a great as a new one
@idanazani80643 жыл бұрын
Ok ty man , But this is something that happened in this car ? Or just my car 🤦🏼♂️ You know about this kind of problem? Its common in mazda 3 gen1?
@mrmusclecarsuspect53623 жыл бұрын
@@idanazani8064 currently rn my mazda 3 is down becuase of a transmission issue a grind it makes on accelerations and on shifts it kicks real hard. Im gona replace the transmission on it. Onc ei have time off work amd peobably post a video about it. But in all reality ove seen mazdas make it too 250k males with no transmission issues. Mine is on 208k miles rightnow
@idanazani80643 жыл бұрын
@@mrmusclecarsuspect5362 my mazda is 185k
@mrmusclecarsuspect53623 жыл бұрын
@@idanazani8064 wow thats still really low to habe transmission problems.
@ashmarhab76244 жыл бұрын
What should we do? When the rpm moving up and down...i have mazda 3 model 2005
@mrmusclecarsuspect53624 жыл бұрын
Try this process should help and should go back to normal.. if you got anymore questions or ot continues let me know...
@ashmarhab76244 жыл бұрын
@@mrmusclecarsuspect5362 what's AT light warning?
@mrmusclecarsuspect53624 жыл бұрын
Its a warning light that your transmission is wearing out you'll often see warning light that shines AT which stands for (Automatic transaxle) in this case its best to get ut diagnosed If your transmission is wearing out you'll often see awarning light that shines AT.
@sweatpantsninja5994 жыл бұрын
Why would or does this work? It seems like that wouldn't fix anything. What is this even doing I dont understand how doing nothing fixed your car.
@SPEEDFREAK69883 жыл бұрын
It's allowing the PCM to recalibrate itself at idle.
@jessicawolfe54275 жыл бұрын
What if I can’t get my car to stay idling?
@mrmusclecarsuspect53625 жыл бұрын
Jessica Wolfe remove the positive off the battery for 5 minutes then connect it then try the process again if this don’t work theirs another problem let me know if it works or not
@jessicawolfe54275 жыл бұрын
Thank you so much I will try it first thing in the morning!!!! I will definitely let you know if it works or not!!!
@mrmusclecarsuspect53625 жыл бұрын
Jessica Wolfe no problem I’m glad I can help and I will be waiting for your feedback let me know what happens. Thanks
@jessicawolfe54275 жыл бұрын
What should I do if it won’t idle without my foot on the gas pedal should I keep my foot on the pedal?
@mrmusclecarsuspect53625 жыл бұрын
Jessica Wolfe your next step would be check your idle air control that would be the thing causing the car to only remain on idle when your foot is on gas dose your car want to shut off when you reach a stop is one of my questions?
@guillermovizcarra68204 жыл бұрын
I added an amplifier and started to have high rpm. Disconnected the amp (thought it was the amp) and didnt change back to normal.
@mrmusclecarsuspect53624 жыл бұрын
Guillermo Vizcarra if you disconnected the battery, you need to have it releen idle follow this procedure should fix it if you still have problem let me know.. good luck
@guillermovizcarra68204 жыл бұрын
@@mrmusclecarsuspect5362 Ill try that tomorrow and keep you posted!
@mrmusclecarsuspect53624 жыл бұрын
Guillermo Vizcarra yea let me know what happens good luck
@guillermovizcarra68204 жыл бұрын
@@mrmusclecarsuspect5362 The RPM is down to normal. Is there a certain speed I need to be driving? Its having a hard time shifting.
@Delta31113 ай бұрын
Mazda sucks
@elavation7890Ай бұрын
Good cars the only problem I dislike about these cars are the electricals also if 1 thing stops working the whole car will run rough.
@marcelrodriguez97945 жыл бұрын
SO
@ashrafuddin27894 жыл бұрын
Hi, I have 2006 Mazda 3 standard trany., Same problem that you had like rough idle, even stall engine with shacking when i try accelerate. stay rpm about 650~700 and running. I cannot drive because, touch the gas pedal causing stall engine. I change spark plugs, igniter coil, air filter, throattle body actually whole intake manifold, still same no change at all. Could you advice me if you have idea such problem to solve?