This was so helpful showing both assembly and practical use along with your overall review at the end. Thank you!
@fixitFlip Жыл бұрын
No problem and thank you for the kind words!
@GeneH3396 ай бұрын
Brother, this video was a blessing. Saw this listed on that one Bezos store but was skeptical. Sold. ( ...also, @3:35 :P )
@fixitFlip6 ай бұрын
Someone finally noticed, lol.
@TG-fq6vy4 ай бұрын
This is such a wonderful, easy to understand video. I was lucky to get two plates that had the name on it. Thank you so much.
@fixitFlip4 ай бұрын
No problem and thank you for the kind words!
@andrewturco3 ай бұрын
Awesome video! Really appreciate the help
@fixitFlip3 ай бұрын
Thanks and glad I could help!
@guybloomfield58205 ай бұрын
Thanks so much. I wasn't sure how to install the anti rattle plate.
@fixitFlip5 ай бұрын
No problem, glad I could help!
@therian-pop Жыл бұрын
Thank you so much! Super helpful, you saved us!
@fixitFlip Жыл бұрын
No problem. Glad I could help!
@hwyvtrucking47323 ай бұрын
Thanks for the videos... very helpful
@fixitFlip3 ай бұрын
No problem!
@donfreeman5679Ай бұрын
Very helpful thank you!!!!
@fixitFlipАй бұрын
No problem!
@MrAdoons4 ай бұрын
Thank you so much for your time, you the man
@fixitFlip4 ай бұрын
No problem, you da man!
@MerlyCosta5 ай бұрын
Very helpful. Thank you!
@fixitFlip5 ай бұрын
No problem. Glad I could help.
@rknrsmth11 ай бұрын
helpful! and the rustoleum spray looks better than the original :)
@fixitFlip11 ай бұрын
Ha ha thanks!
@bearlycamping6 ай бұрын
Great video and extremely helpful. On my Xterra, the license plate would be completely blocked as it's down right where the hitch is. Is there a way to attach a license plate to the cargo carrier? Thanks
@fixitFlip6 ай бұрын
Thats interesting. My suggestion would be using self-tapping screws or drilling holes and using nuts and bolts.
@skulledmonte844 ай бұрын
I'd probably get a few cans of PB Blaster "surface shield" and spray it inside the tubing best i could to preserve it even more...
@fixitFlip4 ай бұрын
Good tip!
@KeyFobRob Жыл бұрын
Very cool
@fixitFlip Жыл бұрын
Thanks!
@frankrocha14793 ай бұрын
thank you for the video. the end caps are sold at Lowes or where they sell metals.
@fixitFlip3 ай бұрын
No problem and good tip there!
@jeffkuipers103020 күн бұрын
great job but i would have put blue locktight on the 4 bolts to make sure they don't come loose.
@fixitFlip18 күн бұрын
Good idea!
@DJTRE765 Жыл бұрын
Is this for sure the correct order on the bolts and washers? I always thought the flat washer was to be on the same side as the bolt head to keep ot from digging into the metal.
@fixitFlip Жыл бұрын
Yep, this is correct.
@mohammedhshaik70288 ай бұрын
Thanks a lot it helps
@fixitFlip8 ай бұрын
No problem.
@kingznkrookz111 ай бұрын
very helpful video. thanks. wondering though , how does it do when its folded up ? does it bounce around a lot ? it looks really close to the van
@fixitFlip11 ай бұрын
I had it folded up the whole time I was driving around once we got to our destination and it does not bounce around at all. I would say the only downside to folding it up is that you can't open up the trunk of the van without folding it back down if you need to get in there.
@kingznkrookz111 ай бұрын
OK. Thanks @fixitflip
@fixitFlip11 ай бұрын
No problem. @@kingznkrookz1
@RaviGidwani59 ай бұрын
I brought this and heading for trip soon. The rattle prevention clamp unfortunately is not doing much in my case. With empty carriage I still see it rattle. I also brought a new anti rattle clamp from HF and got same issue. I have 2inch hitch on my SUV. How was your experience with the anti rattle clip?
@fixitFlip9 ай бұрын
I did not experience much rattling, but I think it will rattle more with the empty carriage them with a load. The antirattle clamp it comes with, and the one from Harbor freight are very similar. Not the best quality. You could definitely buy better.
@RaviGidwani59 ай бұрын
@@fixitFlip thank you. Any more tips for using this carriage on long trips?
@fixitFlip9 ай бұрын
Just try and balance your load as much as possible so stuff doesn’t slide around. Don’t put all the heavy stuff on one side for example. That and make sure all your straps are tight and tied up and you should be good to go!
@RaviGidwani59 ай бұрын
@@fixitFlip thanks. We are on our trip. Just drove through the Mojave desert roads (even the dirt unpaved roads). So far all good. The only thing I have noticed so far is that getting in/out of parking lots may scrape the bottom, so need to be careful.
@fixitFlip9 ай бұрын
Yes, true. The bend in the hitch pipe helps with that some but not 100%. Safe traveling. @@RaviGidwani5
@davidj76078 ай бұрын
Is it a pain to get into the trunk when the hitch is up?
@fixitFlip8 ай бұрын
You cannot get into the trunk with the carrier folded up if that’s what your asking.
@marcotardio5831 Жыл бұрын
How has it held up since you painted it
@fixitFlip Жыл бұрын
I haven't gone on any trips and put it out in the elements yet but I will soon!
@m.a.3571 Жыл бұрын
Exhaust heat didn’t burn anything?
@fixitFlip Жыл бұрын
Not at all. It was actually one of the specific things I was looking for. Thanks for reminding me. I should have mentioned that in the video.