This was super helpful to see how the axle comes out and how everything is assembled. Thank you!
@FixItPhillip4 жыл бұрын
Your welcome, please be sure to subscribe, much appreciated!
@prietogerardo12 жыл бұрын
Great video, I am going to tackle this sooner than later. Note: The seal can leak when the diff breather is clogged, so make note to check that and address it if need be.
@stevanrose7439 Жыл бұрын
You are so correct on the axle vent cap. My seals weren’t leaking but I wanted to check the vent cap and when I unscrewed it I heard a poof sound. So I got a new one and also changed the rear differential oil.
@frankm0023 Жыл бұрын
Great Video, I was able to get it done. the only thing was the abs sensor did not want to come out but , I did get the seal the breather and the brakes replaced. Not as hard as I thought.
@maisyray2 жыл бұрын
This is a Great video, short, covered all the other issues, great editing too......Thank you Phillip
@ad5460 Жыл бұрын
Thanks , simple and straightforward .
@yazming17203 жыл бұрын
Now that's how to Fix it...Straight to the point 👉...Thank You for your video. I've liked & Subscribed. Looking forward to any 4Runner D.I.Y. Keep Up the Great Work Philip 💪 Yazmin.. Venice Beach CA ⛱🏄♀️🏄♀️🏁
@01chevyguy2 жыл бұрын
Thank you for the informative information. I believe my son will be able to repair this before a 1500 mile trip Thanx Again
@bradhaeffner99603 жыл бұрын
great video and explanation of how to do rear seal. Thanks.. BH Auto Repair.
@scottc31652 жыл бұрын
Glad to know I don't have to pull the bearings to replace the seals! Also, I never thought to check if it was brake fluid or diff fluid.
@toddbertram65562 жыл бұрын
I love the chickens in the background. Sounds like my sted.
@HomieHektor4 жыл бұрын
Love the roosters in the background, where you located at Phillip?
@FixItPhillip4 жыл бұрын
Kauai Hawaii, ya they are everywhere lol. Wild chickens
@HomieHektor4 жыл бұрын
FixItPhillip Nice, I’m watching you from California 🤙🏼
@FixItPhillip4 жыл бұрын
@@HomieHektor sweet. I subd to your channel, keep up the good work brotha
@Raysgarage903 жыл бұрын
Nice !! Doing mines this winter when it cools down here in Phoenix
@seanware7194 жыл бұрын
Great camera angle and a great video. Thank you you this was super helpful. This is how video should be done in my opinion.
@FixItPhillip4 жыл бұрын
Thank you!
@mkphotofilm3 жыл бұрын
Nice video. Fun to watch. I like the super wide angle shots. You make it look very easy. I've only got a rubber mallet. Will that do for banging in the seal?
@FixItPhillip3 жыл бұрын
That should work
@charlesyii8963 Жыл бұрын
Subscribed ! Cool and straight to point the bleeder valve just take out and clean it ?
@Faith_Family_Firearms_Freedom11 ай бұрын
Great video. Essy job. 👍
@marioandrade8478 ай бұрын
I had a small accident where I hit a wall and my rear tire wobbles now,I have a replacement axle and need to know if I need to grease the axle end where it connects to the differential before installing it.Also for the brake line do you need to cap the brake line after removing it so it doesn’t spill brake fluid? Any help or tips would be greatly appreciated! Thanks!
@vbnautical50414 жыл бұрын
Did you use OEM axel seal or just one from the parts store?
@Squatch343 жыл бұрын
Same question I was thinking….a friend of mine didn’t use OEM and it leaked immediately after
@bar20bbq702 жыл бұрын
So I wonder how long it took for that bearing to go bad due to all the grease being washed out of the bearing by the gear oil.
@jdlife69433 жыл бұрын
Thanks for making the video
@FixItPhillip3 жыл бұрын
You're welcome
@mercurials544 ай бұрын
Hope my 4th gen 4runner is the same process 🤞
@markhammons22662 жыл бұрын
Thanks for your help now you need to do the wreck appearing steering seal and let me know how to install it
@charlesyii8963 Жыл бұрын
I watch and follow all the steps , thank u after that it start leak again , what might o be
@FixItPhillip Жыл бұрын
Clogged vent on top of differential. Or a worn out axle bearing
@reiestrada91673 жыл бұрын
hey man, did you drain diff oil before take axle shaft appart or just take the entire axle on a upper position on the new seal side instead?
@FixItPhillip3 жыл бұрын
You don't have to drain the fluid. Just make sure its topped off after the repair
@reiestrada91673 жыл бұрын
@@FixItPhillip magnetic oil seal, isnt? thanks buddy!!
@harrison_stone3 жыл бұрын
Thank you
@dalearnold56173 жыл бұрын
What was the round metal piece you used to drive in the seal?
@dalemccord21293 жыл бұрын
Seal driver
@LorenzO-3052 жыл бұрын
Thanks man 👍
@LorenzO-3052 жыл бұрын
What’s is the tool you are using to put in the new seal ?
@wolfwowitz Жыл бұрын
Do you have to pull the differential out as well?
@stevanrose7439 Жыл бұрын
No
@adZHARRISON Жыл бұрын
ON MY 1997 lANDCRUISER (same seal) - GETTING THE SEAL LINED UP TO GO IN SQUARELY IS NEXT TO IMPOSSIBLE - LAST TIME TOOK ABOUT 150 ATTEMPTS AND THE SECOND ONE IS A REPEAT - I JUST PUT THE SEAL IN THE FREEZER TO SEE IF IT WILL HELP - THEY NEED TO GO IN PERFECTLY SQUARE OF THEY WILL DEFORM
@xemericaxx4 жыл бұрын
Did this stop the leak?
@FixItPhillip4 жыл бұрын
Yes it did. Also check if you have a vent/jiggle valve on top of the rear differential housing. If that gets clogged with dirt it can cause excessive pressure in rear diff causing it to leak from seals
@RKOViper19994 жыл бұрын
My ABS tone rings gorged some lines inside of the axle housing where the seals goes
@xemericaxx4 жыл бұрын
I fixed mine with a new axle seal but only after cleaning out almost a tube of FIPG that the pervious owner had squeezed into the axle to try and stop the leak....
@gavingriffith91342 жыл бұрын
is it the same idea for a 5th gen?
@FixItPhillip2 жыл бұрын
Believe so
@ryang15893 жыл бұрын
Did you really just sniff your brake drum that causes cancer in all States