3 Simple Kitchen Storage Projects

[@Fixthisbuildthat]

Pickup a shirt or plans at fixthisbuildthat.com/shop

[@chakireladraoui9331]

Good my friend

[@privateeye2490]

Make even more available room by storing the pot lids upside down on the pots so the handles don't stick up.

[@billopad9625]

Could you free up more space by swapping out the 2x4 and CA glue attaching a few 2mm magnets to the inside of the drawer and onto the divider so it’s held in place…? Just seems mad to store a lump of wood… unless it’s a pretend lump of wood that’s really a cash stash safe & then kudos my friend! 😜😂 Great builds mon frére! Bish bash bosh! 👍

[@mjkay8660]

always invert pan lids. its ezr

[@theoryofpersonality1420]

When storing the pot and lid together you can turn the lid upside down on the pot and get a couple of more inches of space. I know it's minimal but just a suggestion for those like me who have huge crawfish pots.

[@RWAllen-jx8gi]

Just a tip for pots and pan lids: Sometimes you can invert them on the pot/pan, and keep the right lid with the right pot. And in some cases, store smaller pots or pans on the lid.

[@calderart]

I love the rails that hang on the underside of the counter where you put the lids over the handle of each pot and slide the whole thing in and out. Awesome!

[@kenn1936]

that is what I do. then they can sit on top of each other.

[@susanrussell8195]

I never thought about storing about pan on top. That’s brilliant. I just invert the lids to store them in a shallower spot.

[@MamiSantana]

This is exactly how I use to store my cookware until a couple of weeks ago... I just got a new one and sadly the lids don't fit comfortably on the pots when inverted.

[@edewaal97]

You can also put two pans inside each other (one smaller than the other) than put the lid of the biggest pan upside down on top of it, and the lid of the smaller one normally on top of the upside down bigger lid. Most space efficient!

[@JessicaJLandi]

The "before" on the junk drawer was organized enough to be many people's "after"! But this "after" was amazing and the "I don't have any unused space in my drawers - you know what I mean" comment was worth watching the whole video to the end! Classic!

[@smithcry12]

so true LOL

[@txag007]

Instead of the 2x4 at the back of the drawer, you could extend the sides of your organizer and have that be the stop. Then you have 1 extra area for a larger item like a long lighter!

[@KelseyDrummer]

Ooh that's a good idea!

[@pocketlint82]

Was thinking the same thing

[@JaneQPublic]

Good idea! He just lost space he was trying to maximize for a 2x4- confused me bc it seems counterproductive

[@glynnL]

Hollow out the 2x4 and it’s a secret compartment that everyone else thinks is wasted space

[@txag007]

@@glynnL heck yea! Like a false lid on it!

[@amandachilds5290]

Why I like a kitchen with mostly drawers instead of doors...much more useful and easy to get to things. But you came up with creative ideas to fix existing issues. Drawers cost more upfront but totally worth it in long run

[@incognitotorpedo42]

When you climbed into the cabinet, I could so relate. Upvote totally earned.

[@keeper6101]

1st project: Love the additional shelves. When I get my tiny house built, I'm going to ask for extra shelf leaves. 2nd project: Ingenious to have a pull out tray and added shelves on the tray. The lid holder on the door is awesome. I have my lids all jumbled together and your idea is much better.

[@KathrineJKozachok]

Found it! LOL I've gotta hand it to ya. A man who, not only makes his own storage solutions, but would also crawl into a base cabinet to make his point deserves a 'subscribe'.

[@Wico90YT]

Come for the projects, stay for the great Dad jokes.

[@Fixthisbuildthat]

One of the best perks of being a dad!

[@BrenoLuna]

@@Fixthisbuildthat I'd say "me-nails" took the gold this time. Personally, I like to sing that song by Jay-Z and Alicia Keys as "🎵these street will make you feel Breeeeno..."

[@noelg9769]

Dude! Crrrrrushed it with that final joke! Ahahahha.

[@bobbywweaver]

@@Fixthisbuildthat I think they meant "Brad jokes"

[@nova31337]

@@kscheuerman5378 I'm guessing the K in your name stands for Karen. 🙄

[@CindyL4261]

OMG I love your sense of humor! Helps me remember to lighten up while working on my own projects. I plan to add all 3 of these to my kitchen. Thank you!

[@sandytaylor2597]

The second project (extra shelves on roll out drawers) seem so perfect, it's one of those why didn't I think of that.

[@howardcrane5902]

Great ideas. Thanks! Turn the lids over on the pots (handle down) and you can lower the upper shelf. Cheers.

[@benjaminshepard]

I like the ideas, but what earned you my subscription was seeing that hump in the 'most viewed' graph where everyone (including me) went back to make sure you said "nothing bundt storage." Flawlessly subtle delivery, sir.

[@Jewels5241]

Oh my goodness I love these projects! That pull out shelf add-on is GENIUS! My husband and I are about to purchase our first home and I’m totally going save these ideas! I currently use command hooks to hold my pot lids because I’m in a rental but I absolutely love the wooden holder (also don’t have to worry about the plastic hooks breaking after some time). Great video! New subscriber!

[@catherinekilgour2563]

1st project: Looks great as long as your shelves are not too deep or you will have problems getting the items at the back out. We have a cupboard that is the same depth as our fridge and getting the items from the back is already hard enough. For shallow cupboards it looks great. 3rd project: Love this and have already done it for my cutlery draw. For my bottom layer I did four sections that go all the way from the front to the back of the drawer so no gap at the back to fill in. I need to do another set for my second drawer down and maybe a lift out one for the bigger 3rd drawer with all the rolls of tinfoil and cling wrap. 2nd project: I just can't decide what I think of this. Every time you moved it I was worried about the items sliding off the shelves. Probably a me issue. I do like how you rounded the corners, such a small detail can make such a big difference to the end appearance.

[@28Cryptic743]

I built something similar for our kitchen lower cabinet with pull out drawer base, but instead of building a shelf to put on top of the bottom one I built a second pull out drawer at the half way mark so that I could put another full depth drawer platform for other pots

[@Fixthisbuildthat]

thats another great option. Wanted to keep this super simple without needs to install more slides, but that's probably the better solution

[@zalinayaminova]

Я только думала о том, чтобы сделать подобные вставки в ящике вместо лотков, как удачно я попала на ваше видео. Вы молодец!!!

[@dcady1]

I'm so impressed with this project and the others of yours for which I have watched the video. You are skilled at what you do and quite creative at solving storage issues that most of us seem to suffer from. Thank you!

[@barbarab202]

I don’t normally comment on videos, but you have really great content. Easy to understand and follow for the layperson/DIYer and good with some humor incorporated in. I ended up here after looking for KED string lights, then subscribed and guess I’ll be binge-watching. I just bought my first power tools this year (Ryobi drill, skill saw, sander, brad nailer) as I made a vehicle buildout to have organized camping drawers. I’m in a downtown condo, so can only do this on the balcony. But this video has now given me more great ideas for kitchen organization in a small space. Love being organized, and these tools have opened up new opportunities to have things that are customize d and fit perfectly, without spending a fortune.

[@laurapadgett3552]

I love the lower cabinet pullout drawer. I think if I were to do this in my house I would upgrade the drawer slides to account for the heavier load. Thanks for the great ideas!

[@Fixthisbuildthat]

These slides are typically rated for 50lbs. And we're well below that. But beefier never hurt

[@KZa-cz8gb]

Love how you show every little detail. Unlike others that just verbally say them. Thank you so much.

[@johnwkomdat]

I’ve found metal files to be the best way to trim off excess edge banding. Thanks for the great video! I have been putting off kitchen projects like this, so it’s invigorating to see it done so simply.

[@jatdesign4495]

As an interior designer and have designed kitchens kudos. I love these ideas

[@Fixthisbuildthat]

thank you!

[@emilalbu]

for the drawer, you can "convert" the 2by4 to be a hiden storage space, you can hide some small items if you make holes in the bottom or the sides of the 2x4

[@opperbevelhebber7789]

Hi came back just to thank you for the idea Had an extra drawer from the original kitchen in storage resized it to fit inside the cabinet and we are realy enjoying the extra space Might build the shelf for inside the drawer in the future

[@HyperactiveNeuron]

How about a solution for those under-counter corner cabinets where pots and pans go into the in-between spaces? I have 2 corner cabinets that go back as deep as the adjacent cabinet so basically enough space for an adult to hide in. The are commercial solutions that cost $$$$ but my budget isn't $$$$ BTW Excellent tips and projects Brad! Glad to see the lid door is still holding up. I knew it would 😁

[@joan.nao1246]

@JJ_Crank YES PLEASE

[@lawrenceking4144]

Use that space to hide when your siblings bring over their bratty offspring, OR, it's perfect for storing seldom used items such as holiday dishware, that 5 gallon chili pot, or all those Mason jars you got that year when you thought you would start canning all your own vegetables.

[@baxt1412]

we have a lazy susan and it's fantastic.

[@Woojo01]

Thanks!

[@Fixthisbuildthat]

Appreciate the Super Thanks!

[@pdxgigi720]

Just finished making your upper cabinets and plan on doing the lowers for my garage shop and am thrilled with the first tip. It will be perfect for the slide out drawer in your miter saw plan, too!

[@snakeeaterapc142]

Man I love the way you organized the drawers!! It has ALWAYS been one of my personal, biggest complaints about drawers with wasted space and disorganization. Drives me nuts when you open a drawer and it looks like a tornado went through it. I just wish I had all the tools you had to do it all. Great videos!!!

[@shawnswain5826]

I love your kitchen organizing builds. I’d like to see what can be done with the cavernous corner under cabinets!

[@baxt1412]

we have a lazy susan and it's great.

[@johnhpalmer6098]

Unless your kitchen is really old, it may likely have a lazy susan or swing out shelves to make use of that space and is often referred to as a blind corner cabinet and is specifically designed for just such a space. Corner upper cabinets are similar in concept.

[@patmaurer8541]

Thank you! As an inexperienced DIY homeowner, I actually think I could tackle some of these. Well done, sir. Look forward to learning more!

[@dyvel]

Perfect advice for those who have a fully equipped workshop already!

[@susancowan9359]

Very cool, I love how you are so detailed in your directions and make it look fun and not as hard to tackle. Since we all know how frustrating it can be to want to redesign our spaces without having to be a professional carpenter. I am new to your channel and look forward to watching more of your other videos. Thank you for all the work you put into making these videos for all of us. May God always Bless you with good health and prosperity in all you do.

[@cindy844]

My question is this: When your husband does this kind of work for a living, how do you get him to do it at home??

[@mariettakristoffersen701]

You need to hire him, hahaha!

[@gerhardpeter3011]

A Man dont wanna built things??? No Workingroom? No Tools??? No Insperation??? Sry for this

[@michaelclark6547]

Good luck. Hire someone else

[@00bsdude]

​@@gerhardpeter3011 I work in manufacturing for a living, so similar boat. To be honest, so tired from working on the stuff at work all day, can't even begin to fathom doing it for my own home haha. Ideal way would be to have him book a few days off and do it at home instead of work during his normal work hours. Trying to make him do it while he's also working full-time will lead to resentment

[@ummm8511]

Start doing it yourself. He'll help you finish

[@2degucitas]

My kitchen cabinets are circa 1978. I desperately need to do this! I can take out the pull out shelves and add drawer rollers and a much needed back stop! Tired of stuff falling down the back. The door pot lid holder is genius. No more digging around. Time for new hinges as well.

[@andreamaclachlan980]

Project 2: tip the pot lid upside down so the handle is within the pot itself. Shelf only needs to be pot height + lid rim high. Also, if you're good at Tetris, you can stack pots on each other to make a pot tower. Just don't bump it🤪

[@theresagomez2605]

This is how I store mine. Plus the correct lid is always with the corresponding pot.

[@justayoutuber1906]

Well done video - good flow, good camera focus, and a little humor - and no loud annoying music.

[@clellbritt3434]

Great ideas. Now what about a corner cabinet. I'd live to see how you tackle one of those. Some of the OTS solutions are VERY pricey.

[@Alleyvon]

I can't thank the creator of this video enough for sharing these kitchen storage projects. They were easy to follow, and the results were outstanding. My kitchen is now more organized and efficient, thanks to these simple but brilliant ideas.

[@BoldObsessions]

Love this video! Just a tip. Turn the lid upside down so you don’t have to worry about the handle!

[@ianpearse4480]

Novel 2 x 4 storage. All back of the drawer like. Love it.

[@micknolen]

I really like these projects. The last one could be taken up a notch by making the top try base out of clear plexi instead of 1/4 ply. That way you can see everything on the bottom with moving the top tray

[@prestonlane6253]

I can't recommend enough to replace those plastic clips. I had one fail on me (top shelf of cabinet) when I was opening the door, and it was a miracle that nothing fell on me. We did lose a bowl or two, but were fortunate that was all that was broken.

[@HOrziPEtra]

To prevent tear-out of the wood when cutting, you can run a strip of masking tape along the cut line

[@mismatmom]

Love the profile for the shelf. Bet got a lot of action.

[@Schrimpieman]

Helpful hint for edge banding around curves: Heat Gun. After all, the only thing necessary is to melt the adhesive on rear of strip. Follow through by applying pressure (with a rag so ya don't burn your fingers). Works great for me every time.

[@BevJackson]

I love your videos! Besides giving me valuable information, you crack me up!!!!

[@SamLopez11]

Wow, at first I thought that last project was going to be a little "extra", but it turned out great and really spruced up the look and functionality of that drawer!

[@KitchenDezign]

Nice idea. One other- if considered when purchasing cabinets, is to increase the depth of wall cabinets to 15" instead of 12". It will only add about 15% of the cost of the original cabinet, but will give you 25% more storage space...and you will hardly notice it is deeper, except that you can store more bowls and cups, or extra large plates.

[@jeannebrewer6089]

This probably is a "duh" for you folks who sound like you know what you're doing, but please make sure your upper cabinets are very sturdily built. Several years ago, I got a "deal" on cabinets and had friends install them. Several months later, I noticed that the cabinet backs were not firmly against the wall and had to holler for help. (I'm a widow living in a "cousin-built" house that passed inspection 25 years ago LOL.) The cabinet was reinforced and re-hung and all is well so far. But I no longer fill it to capacity and have gotten rid of a LOT of glasses, coffee cups, and heavy casserole dishes, etc. Just *be sure* your cabinetry can support the load you're expecting it to handle. None of us want to have our cabinets crashing down and wreaking havoc on our counter-tops...

[@KitchenDezign]

@@jeannebrewer6089 Wow- you don't see that very often. Indeed great point.

[@caedengoering]

Just bought a house, and I'm making some small storage tweaks as we go. I've mainly been buying storage and drawers from IKEA, Walmart, Amazon, etc. This has given me new motivation to do these projects myself. I've been a little overwhelmed by the time and energy required. While I know these projects will take time - you made this look easy and fun! Looking forward to taking back our kitchen space. It is relatively small - but these hacks will really open it up. Thanks so much for sharing. Pro safety tip - you probably should wear a mask instead of inhaling all of that dust, lol.

[@BiPolarBear722]

Hey, I just wanted to say I love your videos. Especially the ones where you make mistakes. I don’t have the fancy tools you have so I make plenty of mistakes. It’s reassuring to see that even professionals make mistakes. Just have to learn from it and move on.

[@Fixthisbuildthat]

We all make mistakes, that's how we learn and get better!

[@luc1ferblack]

They do basic pine shelving with adjustable shelves suitable for garages usually they have a metal cross at the back for support. These are great for kitchens remove lower shelves leave one at the bottom and you can put bins on it middle shelf is ideal for a coffee machine or air fryer upper shelves are ideal for tinned food top shelf for large items like a wicker stoarage basket etc. saves a ton of counter and cupboard space. A decent plate rack wall mounted over the sink can be modified to drain into the sink again frees up cupboard space. Magnetic spice rack shelves are great for the side of fridges and ikea do a solid small wheeled 3 shelf trolley ideal for small gaps each shelf holds 3 2L bottles of soft drink.

[@ChrisW228]

That second project is awesome, and it seems like you could have made the shelves even deeper.

[@justinjacobson2926]

The pull out lower cabinet is something my house needs. For drawers I am using a 3d printer and the gridfinity system.

[@MaraMara89]

Well, it needs a lot of tools. In some shops (in Poland we have Castorama) you can buy planks and pay a little extra to cut them in exact dimension you need - great if you don't have saw etc. With big pot: you can try to put your lid upsine down - most of them should feet. Then you have handle inside the pot and flat space to put something on top (for example smaller pot) Putting piece of wood at the back of drawer is waste of space, better would be adding extra divider and storing there something you rarely use (in mine drawer it is nutcracker)

[@pattijesinoski1958]

I added extra shelves 2 decades ago. Best thing i did. I got Lowe's to cut the white laminate shelves to me to size.

[@ronadkins8997]

Completely enjoyable video as always! Love the jokes, movie clips and most of all the build! I will be here for every video you put out. Thank you so much ❤️

[@ruthieclarke9125]

This would be great for me so that I can still pull out the entire unit and access the plumbing in my camper. Saved for next project. Thanks.

[@Warpfield]

How about a DIY spice rack mounted inside a pantry door. I did this and literally cleared out an entire cabinet.

[@a.p.5429]

Really like your kitchen and how you've made it so much better. All I would need is a folding step ladder to reach those top shelves.

[@Fixthisbuildthat]

kzbin.info/www/bejne/gJnRaISOgNxkias 👍

[@williamellis8993]

Great ideas, Brad. When I add extra shelves, I buy the melamine covered shelves and trim them to size keeping the front edge intact. Also, I was wondering partway through how long before the "me" nails made an appearance (lol). Bill

[@chris3m98]

William Ellis, what are "me" nails????

[@williamellis8993]

Chris 3M Since his name is Brad, he calls brad nails "me" nails

[@chris3m98]

@@williamellis8993 Thanks for the reply. Merry Chrismas 🎅

[@americanflika1311]

At a friend's house I recently saw a two tir drawer that the top was all the way to the front and you pushed it back to expose bottom so the upper section receded into dead space behind and when you closed the drawer it is automatically pushed back into the front,. It worked very cool with full extension drawers and you have full use of the bottom section 😊🎉

[@MattressSwayze]

I thought this was David Tennant for the first minute. Awesome tips!😄

[@hsjawanda]

Now that you mention it 😆😆😆!

[@rusy-ok]

Гениально! Сделаю себе такой же выдвижной ящик и держатель для крышек. Спасибо за идею! 👍

[@brendamoon2660]

Love the spice bottles with the top touching the next shelf lol how are you reaching for the spice?

[@sandyhumissouri5131]

Those are the spices they never use 🤣

[@kenn1936]

that was one absolutely AWESOME video. I often wondered how you got the top layer to slide back and forth in the drawer. now I know. I have 2 very deep drawers that can be utilised better, and I know just how to do it, thanks to you.

[@teagan_p_999]

That second one would be even better with some kind of handle attached at the top so you don't need to bend over to pull it out.

[@greatfun7316]

Honestly, when I have a bad day, I just watch one of your videos, and my smile is coming back. You are soooo funny! (to be more honest, I'm also a woodworker and I adore your videos. Very well explained!)

[@hhdbhn302]

When you crawled into that kitchen cabinet, I just knew I had to subscribe.

[@Stacy_Sunshine]

you could make that 2x4 piece hollow for hidden storage, or frame it out, as well.

[@andreasmith8213]

Any reason in particular why you put a 2x4 in the back spot instead of making another space for supplies? Loved the video! Thanks.

[@stevebincolo]

Dude, the lower cabinet insert, brilliant

[@scottjacoby2594]

I know the door holds up fine from the pot lids, but if there ever is an issue or if you fear there being an issue, attach the door to the new pull out drawer. The attachment point will be at the bottom where it can easily take the weight so no risk of putting stress on the hinges leading to possible breakage.

[@billyblackie9417]

Great ideas needed for any home for space, convenience, safety and priority for the home owner

[@JaneyInTheMoment]

Great tip and entertaining

[@vickigonya9432]

Love the pot lid holder! And switching all my lowers to pullouts and drawers

[@ChrisW228]

On the drawer organizer, is there a reason you used a block of wood and didn’t include one more compartment on the bottom?

[@johnhpalmer6098]

If you mean the block of wood at the back? If so, likely he does not have full extension glides so that space is wasted

[@ChrisW228]

@@johnhpalmer6098 I’ll Google what extension glides means. :) It just seems like if you can have a block of wood, you could have an open box the same size.

[@johnhpalmer6098]

@@ChrisW228 In case you haven't yet, it's allowing for the drawers to open all the way, not leaving the back of the drawer in the cabinet. Most drawers without metal glides do this as a way to keep the drawers in not get fully pulled out and on the floor. In other words, a bit of the drawer is left in the cabinet and that space is often hard to get to.

[@ChrisW228]

@@johnhpalmer6098 ah, thank you. Makes sense.

[@johnhpalmer6098]

@@ChrisW228 Also, cheap furniture/cabinet, with metal glides don't fully extend either.

[@LiviaPewtress]

This is brilliant!🎉🎉 I really want to build something now. You wouldn’t think so, but I totally geek over power tools and building with the wood makes my heart sing Thank you for sharing your wisdom

[@LiviaPewtress]

did you see the account that is trying to be you? thanks for removing the comment

[@cindyleewood1]

Are there plans for the lower cabinet project on this video?

[@dearyvettetn4489]

If you have a project for a blind corner base cabinet with a 🤬 13” opening I will love you forever 🥰 Your climbing-inside-the-cabinet bit is me anytime I need to retrieve those rarely used items that I hide back there and I haven’t found any fixed that will work with such a small opening.

[@clevelandexplorer2221]

You're the first person to see it my way about the inefficient wasted space in cupboards!! This was a relief, and a good design too :o

[@clairemoore9012]

Thanks for your videos I really enjoy watching the entertainment as well lol. I have a question for you if possible. My Carpenter built the cabinets on sight using poplar wood. It seems that a lot of the inside areas are unfinished, so I get splinters every now and then. Can I Use that veneer on the inside and how easy do you think it would be for me to do it without asking my husband to LOL

[@ICU-mw7su]

Easier to use shelf paper! Bonus is all the great color & patterns they come in!

[@lawrenceking4144]

The bottom cabinet pull out solution is genius. I considered building a top drawer, but determined it would interfere with my ability to reach things in the very back of the bottom platform. With one tiered drawer that pulls out the entire cabinet contents I would be able to see and reach everything. And I don't need a full length drawer for the top.

[@SamYoungnz]

Thanks for the ideas. I just wonder why you didn't fix the cupboard front onto the drawer so you don't have to (a) open the cupboard, then (b) pull out the drawer? Why do two things - with a risk of clashing the two together - when you only need do one? We have very few cupboards in our kitchen: pretty much drawers only. So much easier. And if - instead of putting pot lids inverted in the pots as many of your audience suggest - you want to store the lids separately, you could slot them on the inside face of the drawer.

[@catclark9488]

Wouldn't it make it harder to get the items out if the cupboard front was fixed to the drawer? I would think it would be easier to access items in a 'deep' drawer with shelves like this, from the front and a side, rather than two sides and no front access. No front access means you have to slide the pot out and upwards, instead of out and frontwards. But to each their own i guess!

[@spacecaptain9188]

That junk drawer stuff can be stored vertically for quick and easy one handed access. I used a hanging shoe holder, but plan to build an industrial style vertical holder soon, just because it looks better than a shoe holder.

[@DanTr90]

For your scrap wood what do you do to keep bugs out of the wood pile? I always have spiders everywhere near the wood piles and under my bench.

[@baxt1412]

spray the perimeter of your shop. also sealing air gaps. if they can't get in, they won't be at your pile.

[@FearTheSherrer]

I love your videos and your sense of humor!!

[@Fixthisbuildthat]

thanks!

[@4N0NYM0US73]

I wish there was a channel where you could do some of this stuff without the whole expensive workshop set up and premium tools 😨

[@susanpeterson9558]

I use paint can method with a board under the cans to get overhang and distribute the weight better.😊❤

[@zachshott7833]

These are projects that are going to be a must, all of them are great ideas.

[@99xara99]

Awesome! Now those are actually fairly easy to do, simple and useful for basically every kitchen out there. I appreciate it!

[@Javaman92]

As a retired cabinetmaker I found this fascinating. Why? The new cool tools that have come around since I have been involved with it. I will say this, even if my vision won't let me do the fine work I used to do, I'd kill to have an awesome shop like you have. Just kidding about the killing part. LOL ;-)

[@jamescross8918]

I've got to say, this video really hits that sweet spot of high quality production and practical, thorough advice while retaining some real personality (I detest channels that make me feel like I'm watching daytime TV) New subscriber here!

[@firewoman911]

You have given me hope that I don't have to completely demo my new house because the storage and cupboard function stink in every single room! Thanks for giving me hope!! Whew!!

[@CrankyOtter]

Always up for some edge banding 😊, but I suggest putting the extra shelves lower. Put the lowest shelf 5-8” up - it’s eye level for many, and means short folks can use 2 shelves without ladders or pulldowns. Use the low shelf for short things like mugs, snacks, your bins, or plates. Allow more height for the next shelf up (put the stacked spice rack there - and add a lazy susan for oils & sauces). Then the top shelves that the short folks can’t reach are for low frequency items (like that bundt pan)

[@Nats1917]

Круто, конечно! А мы просто выкатные корзины покупаем в несколько рядов! Даже не думала что можно вот так вот сделать интересно!

[@berg8970]

Video idea for you,. Make a spice rack where Square spice jars lay sideways and are stacked on top of each other with labels on the lids as well as on the side. This is a super easy project and saves a ton of space, Obviously, shelves will have to be made in between each layer.

[@Féline-ck7sw]

Des astuces magnifiquement réalisées et tout particulièrement le caisson bas coulissant, rehaussé avec ingéniosité ! Quand on aime le bois....❤

[@befmx31]

13:57, as soon as you said that I was thinking....and then you came thru at 13:59. NICE!

[@theresabrooks7901]

I love this guy!!!, He's a natural!

[@Jimmyjoe5757]

i like your vids sir... once you cut that little piece to complete drawer organizer and said " lets see how it fits'' fist though in my mind was that Jim Carrey like a glove saying and it played.. bravo brother that was awesome!